homechoice Aston kids bed User manual

Aston kids bed
assembly instructions
Please follow these guidelines for safe assembly:
1) Because this item is large, we recommend that two people assemble it together,
in the room in which it will be used.
2) Get the best from your bed:
Assemble it on a soft, clean surface
Only use the hardware provided. It is recommended that you use a screwdriver
Remember not to over-tighten screws or drag the bed along the ground during
assembly or normal maintenance
HomeChoice will not be held liable for damages caused by improper assembly.
3) Please make sure that you have all the parts and hardware items listed before you start
assembling your bed. If you nd that something is missing, please do not assemble.
Contact our Customer Service on 0861 466 324.
Shop online – go to
homechoice.co.za
Please make sure that you have all the parts and hardware items listed before you start assembling your bed.
Guarantee
This HomeChoice furniture item carries a 6-month guarantee against workmanship and
manufacturing faults. The guarantee starts from your invoice date and is valid for 6 months.
On delivery and assembly of this furniture item, it is imperative to ensure that the item is not
damaged in any way. “If anything is missing or faulty”, you must not accept delivery of the
item or alternatively return, it within 14 days of receipt.
Important:
Please ensure that you:
1. Keep the original packaging for 14 days to meet the returns policy requirements
2. Keep your original invoice (as well as a copy)
3. Keep this guarantee
If you require any further information, please do not hesitate to call us on 0861 466 324.
If the furniture is faulty and still within its guarantee period, please SMS ‘RETURN’ to
072 595 6743 and we will call you back to book an assessment. Alternatively, contact one of
our agents on 0861 466 324 (South Africa) or [phone] (outside of South Africa).
Part Single
1Chipboard screw 18 pieces
2Dowel (10x40) 12 pieces
3Dowel (10x50) 4 pieces
4Cross dowel 2 pieces
5Half-moon bracket 4 pieces
6Furniture screw 6 pieces
7Pin 4 pieces
8Cam 4 pieces
9Allen key (5mm) 1 piece
HARDWARE LIST:
Wood Care
instructions
Care and maintenance
The best way to properly care for your wooden furniture is to dust, clean, and polish
regulgrly. Remember to be extra careful when cleaning your furniture, as harsh chemicals
can be damaging to the wood. Using a mild wood polish will ensure that your furniture
remains clean and shiny, adding a very thin non-permanent, yet protective layer to the
surface.
If you need a quick cleaning solutlon, a damp cloth will simply do the job.
Just remember that wood does not mix well with water, so only use a cloth that is
slightly damp to the touch.
Do not pull or push the bed once assembled. Two or more people must lift the bed from
two ends when shifting it around to avoid damaging the bed.
The maximum weight restriction for each size bed is as follows:
Single: 80kg

Metal half moon bracketMetal half moon bracket
suppliesuppliedd
Metal furniture screw supplieMetal furniture screw suppliedd
LEGLEG
BEDSIDEBEDSIDE
(X 12)(X 12)
10X4010X40
(X 4(X 4))
10X5010X50
If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Step 4
Insert cams on the top side rail, and then
insert the top side rail on the bottom side
rail, use the screwdriver to clip the cams
on by following the arrow on the cams on
the bottom side rail on both sides
(left and right), use the screwdriver to
tighten the pins
Step 2
Insert half-moon brackets with holes
lining up on the bottom side rail on both
sides, (left and right), and then insert
the furniture screws on the headboard
and footboard legs, use the allen key to
tighten the screw
Step 1
Insert dowels (10 x 40) on the headboard
and footboard on both sides, left and right
as indicated with circles
Step 5
Insert cross dowels on the top side rail on
both sides (left and right), and then insert
the furniture screws on the headboard,
use the allen key to tighten the screws
Step 3
Insert dowels (10 x 50) on the bottom side
rail on both sides (left and right), insert
the pins on the bottom side rail on both
sides left and right, use the screwdriver to
tighten the pins
Step 6
Insert bed slats and evenly distribute the
18 screws provided (2 per slat), insert the
chipboard screws on the ‘bed slats’ where
there are small holes to guide you and
use the screwdriver to tighten the screws