homechoice San Tropez Double bed User manual

San Tropez Double/Queen/King bed
assembly instruction
Please follow these guidelines for safe assembly:
1) Because this item is large, we recommend that two people assemble it together,
in the room in which it will be used.
2) Get the best from your bed:
Assemble it on a soft, clean surface.
Only use an M3 or M4 Phillips screwdriver and the hardware provided.
It is recommended that you do not use any other tools or power tools for
the assembly.
Remember not to over-tighten screws or drag the bed along the ground during
assembly or normal maintenance.
HomeChoice will not be held liable for damages caused by improper assembly.
3) Please make sure that you have all the parts and hardware items listed before you start
assembling your bed. If you nd that something is missing, please do not assemble.
Contact our Customer Service on 021 680 8000.
Page 1 of 8
Shop online – go to
homechoice.co.za
Double/Queen
King
145210 Merchandise IMs design A5 Booklet-v3_R.indd 1 2019/05/16 14:28
STEP 9:
Insert a drawer on both
sides of the bed to
complete the assembly.
Double/Queen
King
145210 Merchandise IMs design A5 Booklet-v3_R.indd 8 2019/05/16 14:28

Page 7 of 8
A
First step
3rd step
Side rail metal support
Centre rail
Side rail metal support
Second step
A
B
3
3
7
STEP 7:
Place the centre caps
(B) and the end caps
(A) on the bent wood
slats (8).
STEP 8:
Lay the bent wood slats
along the width of the
bed, aligning the centre
caps with the holes on the
centre rail/s and the end
caps with the holes in the
side-rails. Press all the caps
down gently to t them
securely into the holes.
A
8A
B
A
8A
B
First step
3rd step
Second step
Side rail metal support
3
73
Centre rail
B
A
A
Side rail metal support
King
Double/Queen
145210 Merchandise IMs design A5 Booklet-v3_R.indd 7 2019/05/17 11:11
Page 2 of 8
Please make sure that you have all the parts and hardware items listed before you start assembling your bed.
PARTS LIST: Part Double/Queen King
1Headboard 1 piece 1 piece
2Footboard 1 piece 1 piece
3Side rails 2 pieces 2 pieces 2 pieces
4Cross rails 2 pieces 2 pieces
5Short legs with adjustable nut 4 pieces 4 pieces
6Long legs with adjustable nut 2 pieces 4 pieces
7Centre rail/s 1 pieces 2 pieces
8Bent wood slats 26 pieces 39 pieces
9Feet 4 pieces 4 pieces
10 Drawer side panels 4 pieces 4 pieces
11 Drawer back panels 2 pieces 2 pieces
12 Drawer bottom panels 2 pieces 2 pieces
13 Drawer front inner panels 2 pieces 2 pieces
14 Drawer front outer panels 2 pieces 2 pieces
145210 Merchandise IMs design A5 Booklet-v3_R.indd 2 2019/05/16 14:28

X2
G
G
F
F5
4
5
STEP 3:
Attach 2 short legs (5)
to a cross rail (4), using
5/16" x 45mm screws
(F). Do the same on the
other cross rail.
Page 5 of 8
Bed Frame Assembly:
1 2&
1
2
LL
9
9
STEP 1:
Secure the feet (9) to the
headboard (1) and the
footboard (2) using
M4 x 45mm screws (L).
1
3
2
3
31
2
&
GD
STEP 2:
Align the brackets on
both side rails (3) to the
holes on the headboard
and footboard. Secure
the brackets to the
headboard and
footboard using
5/16" x 25mm screws (D).
Tighten screws using the
M5 Allen key (G).
145210 Merchandise IMs design A5 Booklet-v3_R.indd 5 2019/05/16 14:28
Page 4 of 8
Drawer assembly:
X2
X2
X2
X2
X2
STEP 1:
Secure 2 drawer side panels (10)
to a drawer back panel (11), using
M4 x 35mm screws (I). Tighten the
screws with your screwdriver (M).
Then secure the other end of the
2 drawer side panels to a drawer front
inner panel (13) in the same way.
I
I
I
I
KE
II
I
12
13
10
10
11
JJ
STEP 2:
Secure a drawer bottom panel (12)
to the frame you built in step 1,
using the same screws (I).
STEP 3:
Secure 5 castors (K) to the underside of
the drawer bottom panel from step 2,
using M3.5 x 12mm round screws (E).
STEP 4:
Secure the drawer front outer panel (14)
to the drawer front inner panel from
step 1, using M4 x 25mm screws (J).
STEP 5:
Your rst drawer is now complete.
Repeat steps 1 to 4 to build your
second drawer.
13
14
145210 Merchandise IMs design A5 Booklet-v3_R.indd 4 2019/05/16 14:28

Page 3 of 8
Hardware Double/Queen King
AEnd caps 26 pieces 26 pieces
BCentre caps 13 piece 26 piece
C1/4" x 15mm screws 8 pieces 8 pieces
D5/16" x 25mm screws 8 pieces 8 pieces
EM3.5 x 12mm round screws 40 pieces 40 pieces
F5/16" x 45mm screws 6 pieces 8 pieces
GM5 Allen key 1 pieces 1 pieces
HM4 Allen key 1 pieces 1 pieces
IM4 x 35mm screws 44 pieces 44 pieces
JM4 x 25mm screws 16 pieces 16 pieces
KCastors 10 pieces 10 pieces
LM4 x 45mm screws 8 pieces 8 pieces
MM3/M4 screwdriver Not provided
HARDWARE LIST:
If you nd that something is missing, please do not assemble. Contact our Customer Service on 021 680 8000.
145210 Merchandise IMs design A5 Booklet-v3_R.indd 3 2019/05/16 14:28
Page 6 of 8
STEP 4:
Both cross rails have an
L-bracket on each end.
Slide these into the slots
on the side rails. Secure
using 1/4" x 15mm screws
(C) tightened with the
M4 Allen key (H).
STEP 5:
Secure 2 long legs (6)
to the centre rail (7)
using 5/16" x 45mm
screws (F), tightened
using the M5 Allen key
(G). The king-size bed
has an extra centre rail.
Add long legs to this
too. Please note that
the long legs each have
an adjustable foot that
changes the height of
the leg if needed.
STEP 6:
Slide the L-bracket on
both ends of the centre
rail/s into the slots on
the headboard and
footboard.
C
C
F
4
3
H
H
7
6
G
71
2
&
7
L Bracket
Bracket
Bed Frame Assembly:
Double/Queen
King
145210 Merchandise IMs design A5 Booklet-v3_R.indd 6 2019/05/16 14:28