homechoice Ivana User manual

1
Ivana Bed
assembly instruction
Shop online – go to
homechoice.co.za
Please follow these guidelines for safe assembly:
1) Because this item is large, we recommend that two people assemble it together,
in the room in which it will be used.
2) Get the best from your bed:
Assemble it on a soft, clean surface.
Only use an M3 or M4 Phillips screwdriver and the hardware provided.
It is recommended that you do not use any other tools or power tools for
the assembly.
Remember not to over-tighten screws or drag the bed along the ground during
assembly or normal maintenance.
HomeChoice will not be held liable for damages caused by improper assembly.
3) Please make sure that you have all the parts and hardware items listed before you start
assembling your bed. If you nd that something is missing, please do not assemble.
Contact our Customer Service on 021 680 8000.
Double/Queen
King

2
Please make sure that you have all the parts and hardware items listed before you start assembling your bed.
PARTS LIST:
Part Double/
Queen King
1Headboard 1 piece 1 piece
2Footboard 1 piece 1 piece
3Side Rail 2 piece 2 piece
4Support Bar 1 piece 2 piece
5Support Leg 2 piece 4 piece
6Slats 24 piece 36 piece
7Leg 4 piece 4 piece
8Center Plastic
Connector 12 piece 24 piece
9End Cap 24 piece 24 piece
10 Tie Rod 1 piece 1 piece

3
If you nd that something is missing, please do not assemble. Contact our Customer Service on 021 680 8000.
HARDWARE LIST:
Part D/Q KPart D/Q K
ANut 7
piece
12
piece ESpring Washer
8
piece
8
piece
BBolt M8*35MM 16
piece
24
piece FFlat Washer
8
piece
8
piece
CSpanner 1
piece
1
piece GPlain Washer
4
piece
4
piece
DAllen Key 1
piece
1
piece HBolt M8*45MM
3
piece
4
piece

4
If you nd that something is missing, please do not assemble. Contact our Customer Service on 021 680 8000.
Assembly
Fix legs to headboard and
footboard.
Step 1
Double/Queen/King

5
Assembly Double/Queen
King
Fix side rails and centre
support bar to headboard
and footboard
Step 2
Fix side rails and centre
support bar to headboard
and footboard
Step 2

6
Assembly Double/Queen
King
Fix tie Rod
Step 3
Fix tie Rod
Step 3
If you nd that something is missing, please do not assemble. Contact our Customer Service on 021 680 8000.

7
Assembly Double/Queen
King
Once the slats are
assembled, position the
pegs on the base of caps.
Step 4
Once the slats are
assembled, position the
pegs on the base of caps.
Step 4

8
Assembly Double/Queen
King
Fix slats to bedframe.
Step 5
Fix slats to bedframe.
Step 5
If you nd that something is missing, please do not assemble. Contact our Customer Service on 021 680 8000.

9
Assembly
Complete
Complete
Double/Queen
King

10
Notes

11
Notes

12