homechoice Poppy User manual

Poppy High Chair
assembly instruction
Shop online – go to
homechoice.co.za
Warning :
To keep your child safe while using your high chair, basic safety precautions should
always be followed:
• Read all the instructions carefully and keep this booklet in a safe place.
• Never leave the child in the high chair unsupervised.
• Ensure the harness is correctly tted and the child is secure.
• Do not use if any part is broken, torn, loose or missing.
• Do not use the high chair until the child can sit upright on his/her own.
• Do not use the high chair unless all components are correctly tted and adjusted.
• Avoid placing the high chair near open re or other sources of strong heat, such as
electric bar heaters, gas res, etc.
• The high chair is not suitable for babies under 6 months. This product is suitable for
ages 6 to 36 months or up to 20kg.
Care and maintenance of product:
• To clean your high chair, gently wipe any dirty areas with a damp cloth and dry with a
soft, clean cloth.
• When not in use, please clean the chair, dry it and store it in a dry, cool environment.
• Do not place the high chair in a place where it will be in direct sunlight to avoid aging
and fading of the plastic.
• If the parts of the high chair are loose or lost, please repair them before use.
Please recycle the packaging to protect the environment
Please follow these guidelines for safe assembly:
Please make sure that you have all the parts and hardware items listed before you start
assembling your product. If you nd that something is missing, please do not assemble.
Contact our Customer Service on 0861 466 324.
HomeChoice will not be held liable for damages caused by improper assembly.

If you nd that something is missing, please do not assemble. Contact our Customer Service on 0861 466 324.
Part Pieces
1Seat 1 piece
2Seat pad 1 piece
3Five-point seat belt 1 piece
4Meal tray 1 piece
5Basket 1 piece
6Upper legs 4 piece
7Lower support legs 4 piece
8Support leg connectors 2 piece
9Supporting foot units 4 piece
Parts List Assembly Instructions
Insert the four upper legs into
the bottom of the seat of the
high chair.
Step 1
Secure each upper leg to the seat
unit, making sure that the spring clip is
tted.
Step 2
Secure the front and rear support leg
connectors to the upper legs.
Step 3
Insert the four lower support legs into the
upper legs. Attach the four supporting foot
units. Safely attach the ve-point seat
belt and seat pad to the seat unit – please
ensure that the seat belt is secure. Install
meal tray and basket.
Step 4
Five-point seat belFive-point seat beltt
Upper legUpper leg
Support leg connectorSupport leg connector
Support leg loweSupport leg lowerr
Supporting footSupporting foot
Seat padSeat pad
SeatSeat
BasketBasket
9
7
8
6
5
4
3
2
1
Meal tray