HOMEDEPOT LDN605SALT User manual

Assembly Instructions
Item# LDN605SALT

Before you begin
1．Use the carton as a working surface to prevent product damage during assembly
2．Gather all tools prior to assembly
Tools needed

Table of contents
………………………………………………………...
Introduction 2
Hardware 4
Parts list 5
Assembly 6-8

Hardware
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
(H1) x 20
M6x20 Bolt (H2) x20
M6 Flat washer
(H3) x1
M6 Wrench (H4) x4
Foot pad (preassembled)
(H5) x1
Umbrella lid
(H6) x20
M6 Spring washer

ITEM DESCRIPTION QUANTITY
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
A．Table top １
B．Leg 4
C．Connector 1

Step 1:
Attach Leg (B) to (C) with (H1), (H2) and H3, not tighten bolts fully.
A
(H1) x8
M6x20 Bolt (H2) x8 M6 Flat washer
(H3) x1
M6 Wrench
(H6) x8
M6 Spring washer

Step2:
Attach leg (B) to table top (A) with (H1), (H2) and H3. Then tighten all the bolts.
(H1) x12
M6x20 Bolt
A
(H4) x4
Foot pad (preassembled)
(H3) x1
M6 Wrench
(H6) x12
M6 Spring washer
(H2) x12
M6 Flat washer

Step3:
Put the table upright, put Umbrella lid (H5) on the hole of table top (A).
Made in China
(H5) ×1
Umbrella lid

Assembly Instructions
LDN605SALS

Congratulations on your latest purchase
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work
for you. All you need to do is follow our simple instructions and you’ll be on your way
transforming your room in on time. Good luck-though we’re confident you won’t need it.
Before you begin
1. Use the carton as a working surface to prevent product damage during assembly
2. Gather all tools prior to assembly
Tools needed

Table of contents
………………………………………………………...
Introduction 2
Hardware 4
Parts list 5
Assembly 6-8

Hardware
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
(H6) ×2
M8 wrench
(H1) ×4
M8*40 bolt
(H2) ×4
rectangle metal piece
(H3) ×4
M8 washer
(H4) ×4
M8 spring washer
(H5) ×4
M8 nut

ITEM DESCRIPTION QUANTITY
．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．．
Ａ．Chair frame １
Ｂ．”T” connector (pre assembled) 1
C．base 1

Step1:
Attach chair frame(A) to connector (B) by using H1,H2,H3,H4,H5.
Then, Tighten all blots.
(H1) x 4
M8*40 bolt (H2) x 4
rectangle metal piece
(H3) x 4
M8 washer (H4) x 4 M8 spring washer
(H5) x 4
M8 nut

Step2:
Insert finished step 1 into base(C).

Step3:
Attached cushion (D) to chair seat with Velcro.

Care & Maintenance:
Made in China
1. Before using, clean the chair completely with a soft dry towel.
2. Do not place your chair in wet conditions where there is a risk of rust developing.
3. When not in use, wipe free of any dirtor loose objects, wash with a mild solution of soap and water; rinse thoroughly and dry completely. Do
not use strong detergent or abrasive cleaners.
4. When not in use, store in a cool, dry location away from sunlight