Homerunpet Drybo Plus User manual

Read this user guide carefully and keep it for future reference!
User Guide ENGLISH
PD 50
Drybo Plus
Automatic Cabin Pet Dryer

SAFETY INSTRUCTIONS
PLEASE READ AND FOLLOW ALL SAFETY INSTRUCTIONS BEFORE USE.
•This appliance may be used by children aged 8 or over, provided that they are supervised or have been
instructed on how to use the appliance safely and have understood the resulting dangers.
•Children must not play with the appliance.
• Children must not perform cleaning or user maintenance unless they are at least 15 years old and are
supervised to do so.
• Please keep children under the age of 8 away from the appliance and power cord.
• Set up the appliance on an even, stable, clean, non-slip, dry, and fireproof surface in a spacious area.
• Maintain and ensure that the vent holes are not blocked at the back.
•It is advised not to set up the appliance in the immediate vicinity of the heat source.
• To avoid possible electrical shock, this appliance is FOR INDOOR HOUSEHOLD USE ONLY.
• Do NOT place the appliance OUTDOORS or on WET ground, nor allow the appliance to be put in water or
other liquids.
•The socket must be earthed (protective ground contact).
•The voltage stated on the type plate must correspond to the power cord voltage.
•Disconnect the power cord plug before cleaning, maintenance, and transporting of the unit.
•The device must only be operated with the original power cord.
•Ensure the power cord is against slippage and avoid kinks.
•Don't use an extension cord or modified adapter.
•If an abnormal high temperature or sound is noticed, halt all activity on the appliance immediately and
contact your dealer.
•
•
Don't disassemble and modify the appliance in any way.
To protect against electrical shock do not immerse cord, plugs, or the appliance in water or other liquid.
CAUTION: To provide continued protection against risk of electric shock, connect to properly grounded
outlets only.
EN
ATTENTION
•The drying function must only be used under the supervision of the owner.
• It is ideal to always start with the lowest temperature and blowing speed in order for your pet to adapt. If
your pet still overreacts, stop the use of the appliance immediately.
•Please remove the petting doors when drying features are not in use, do not lock the pet inside if the
petting door is not detached.
•Please consult a professional veterinary specialist first and use this product accordingly under their
guidance if your pets are older or have physical or mental conditions.
• Don't transport the appliance while your pet is inside.
•The Drybo Plus must use the compliant or authorized peripheral products inside. Otherwise, it may cause
damage to the product and result in a potential fire hazard.
The appliance, accessories, and packaging must be disposed of following local and national
regulations.

01
Package Contents
1
2
3
4 5 76 8
9
Components
1Control Panel
2Front Door
3Vent Holes
4Door Handle
5Petting Door
6 Side Handle
7Power Switch
8Power Socket
9Dust Filter
EN
Appliance Overview
02
Number Item
1
Drybo Plus Automatic
Cabin Pet Dryer
2
User guide
3 Power cord
Design issubject to change without prior notice!
1
2
3
EN

A B E FC D
G
HI
J
KLM
N
O
F
Instruction on Control Panel
AHeat mode
BCool mode
CON / OFF button
DLock / Unlock
ECozy dry mode
FQuick dry mode
GSpeed
HMode
IIncrease
JSettings
KStart / Pause
LDecrease
MLight
NTimer
OTemperature
EN
Instruction on ControlPanel
03

ON
O
O
ON
N
N
N
O
O
N
O
o
EN
Turn on the power switch
DE
Check AC Voltage
Input
1
2
EN
Connect the power cord
04
Preparations
4
3
Open the door

Start
Start
- Setting +
Light
Light
3s
EN
Turn ON / OFF the light: Press the light button (press and hold to adjust the light).
.
OFFON
EN
Turn ON / OFF: Press and hold ON / OFF button (about 3 seconds).
Lock / Unlock operation panel: After pressing ON / OFF button, press the lock / unlock button.
05
Operation
Turn ON / OFF the light
3
Long press 3s
ON/OFF
Lock / Unlock
Click and
1
2
Long press 3s

05
Operation
Mode
Heat Mode Settings
Temperature
32 ºC / 90ºF
16 ºC / 61ºF
Fan Speed
Fan SpeedSettings
Settings
Settings
Cool Mode
Cozy Dry Mode
Quick Dry Mode
Temperature
Timer
Fan Speed
Temperature
Timer
Fan Speed
40 ºC / 104ºF
16 ºC / 61ºF
120 min
1 min
40 ºC / 104ºF
16 ºC / 61 ºF
120 min
1 min
IIII
I
.. .
IIII
I
.. .
.. . .. . .. .
IIII
I
.. .
IIII
I
.. .
.. . .. .
Mode Settings navigation:
Press
Mode
to select the preset mode. The selected mode is then shown in a highlighted status.
Press
Increase or decrease the value of the parameters by pressing or
.
Press to run the selected mode.
The temperature unit shown on the Control Panel of the Drybo Plus is changeable. Please keep pressing
, and at the same time until the temperature unit is changed successfully.
Please note: This appliance does not include a cooling function. If the dryer temperature is set below
EN
Mode Setting
4

EN
Rotate anticlockwise the petting doors to unlock and remove them.
DE
When installing the petting doors, fit the petting doors in the unlocked position and turn it to the locked position.
EN
User Guide onPettingDoors
06
Assembly
2
Disassembly
1

Heat Mode
Cool Mode
Start
Quick Dry Mode
Cozy Dry Mode
EN
When using it as a pet bed, please remove the petting doors.
Note:
When the drying mode is on: Please unlock the petting doors before reaching in for petting.
EN
Note:

EN
Make sure to unplug the power cord before cleaning.
EN
Clean the hair that has fallen out.
07 Cleaning /
2
1

EN
Remove the base plate.
EN
If water has accumulated, release it from the drainage. Wipe the cabin interior with a cloth.
4
3
07 Cleaning /

Error Description Solution
The appliance won't turn on -Check power cord connection and power switch.
-Proceed to press the power button multiple times to determine the response.
Fail to reach the preset
temperature
-Check if the vicinity temperature is too low (recommended RT: 5-35 °C/ 41°F-
95°F).
-Attempt to switch off the appliance and wait for 10 seconds.
-Restart the appliance.
The inside temperature is too
high
-Check if the vicinity temperature is too high (recommended RT: 5-35 °C/ 41°F
-95°F).
-Attempt to switch off the appliance and wait for 10 seconds.
-Restart the appliance.
The drying performance is poor -It is recommended to try and increase the temperature and fan speed.
-Please check if the ambient humidity is too high.
Error 1 (E1):
Heater fault
-Switch off the appliance by using the power switch and wait for 10 seconds.
-Restart the appliance.
Error 2 (E2):
Fan fault
-Switch off the appliance by using the power switch and wait for 10 seconds.
-Restart the appliance.
Error 3 (E3):
Temperature fault
-Switch off the appliance by using the power switch and wait for 10 seconds.
-Restart the appliance.
Error 4 (E4):
A/D board fault
-Switch off the appliance by using the power switch and wait for 10 seconds.
-Restart the appliance.
If the actions described fails to resolve the fault, please contact your dealer.
EN
5
6
EN
Rotate the dust filter to remove it.
EN
Rinse the filter with water.
08
Troubleshooting
07 Cleaning /

09