Honeywell 2MLF-DV4S User manual

Honeywell Process Solutions
Isolated Analog Output Module
2MLF-DV4S, 2MLF-DC4S
User's Guide
ML200-IAO
R200
September 2010
Release 200
Honeywell

ii Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide R200
Honeywell September 2010
Notices and Trademarks
Copyright 2010 by Honeywell International Sárl.
Release 200 September, 2010
While this information is presented in good faith and believed to be accurate, Honeywell disclaims
the implied warranties of merchantability and fitness for a particular purpose and makes no
express warranties except as may be stated in its written agreement with and for its customers.
In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The
information and specifications in this document are subject to change without notice.
Honeywell, PlantScape, Experion PKS, and TotalPlant are registered trademarks of Honeywell
International Inc.
Other brand or product names are trademarks of their respective owners.
Honeywell Process Solutions
1860 W. Rose Garden Lane
Phoenix, AZ 85027 USA
1-800 822-7673

R200 Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide iii
September 2010 Honeywell
About This Document
This document describes how to install and configure the 2MLF-DV4S, 2MLF-DC4S isolated
analog output modules.
Release Information
Document Name Document
ID
Release
Number
Publication
Date
2MLF-DV4S, 2MLF-DC4S User's Guide ML200-
IAO
200 September
2010
References
The following list identifies all documents that may be source of reference for material discussed
in this publication.
Document Title
SoftMaster User’s Guide
Contacts
World Wide Web
The following Honeywell web sites may be of interest to Process Solution customers.
Honeywell Organization WWW Address (URL)
Corporate http://www.honeywell.com
Process Solutions http://www.honeywell.com/ps

Acronyms and definitions
iv Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide R200
Honeywell September 2010
Acronyms and definitions
Acronym/Term Definition
A/D converter Converts analog to digital value.
Analog input module This module converts analog voltage/current input to digital
value. It has a resolution of 14 and 16 bits.
Channel Related with the terminal of analog I/O module and
connected to various voltage/current I/O devices,
respectively, with applicable data and diagnosis function.
Conversion time Time taken by an analog input module to sample and
convert the analog signal to digital value. Also, it refers to
the time taken by an analog output module to convert a
digital value to analog value.
D/A converter Related with the output module, it is used to make
continuous size of analog voltage and current signal
proportionately to the digital value.
Full scale Defined as the size of voltage/current where the normal
operation is executed.
Full scale error Displays the graph difference between agreeable analog-
converted value and actual analog-converted value.
Full scale range Displays the difference between the maximum and the
minimum of the analog input.
LSB Least significant bit (LSB) displays the minimum value of the
bit unit.

Acronyms and definitions
R200 Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide v
September 2010 Honeywell
Acronym/Term Definition
Linearity error Analog I/O is related between continuous voltage/current
value and digital value, whose agreeable I/O value is
defined as a line within a distance of the minimum 1LSB of
voltage/current. I/O linearity error is regarded as the
declination between the agreeable-converted value and the
actual-converted value on the graph.
Multiplexer A switching circuit where many signals share one A/D
converter or D/A converter.
Analog output module A module with an output circuit to convert analog DC voltage
or current signal proportionate to digital value delivered to
the module from the processor.
Resolution The minimum value recognizable by a measuring
instrument, which is usually displayed in engineering units
(1mV) or the number of bits. In other words, 16383 types of
output are available for 14 bits.
Filter Used to reduce the change in digitally-converted value by
sudden change in the external noise or input for the analog
circuit, through Software and Hardware filters.
Accuracy Displays the maximum declination between agreeable value
and output voltage or current for the whole range of output.
On the other hand, it displays the maximum declination
between agreeable value and digitally-converted input signal
value for the whole range of input. Generally, percentage is
displayed for the full scale. Gain, Offset and Linearity error
are all included in the error type available.
Output accuracy Displays the difference between the actual analog output
voltage/current value and the agreeable-converted value on
the conversion graph for the full scale, with Offset, Gain and
Drift error factors included as well as normal temperature
(25°) and available temperature range displayed,
respectively.

Acronyms and definitions
vi Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide R200
Honeywell September 2010

Support and Other Contacts
R200 Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide vii
September 2010 Honeywell
Support and Other Contacts
United States and Canada
Contact:
Phone:
Fascimile:
Mail:
Honeywell Solution Support Center
1-800-822-7673
Calls are answered by dispatcher between 6:00 am and 4:00 pm
Mountain Standard Time. Emergency calls outside normal working hours
are received by an answering service and returned within one hour.
1-973-455-5000
Honeywell TAC, MS L17
1860 W. Garden Lane
Phoenix, AZ, 85027 USA
Europe, Middle East, and Africa (EMEA)
Contact:
Phone:
Fascimile:
Mail:
Honeywell TAC-EMEA
[phone]
[phone]
TAC-BE02
Hermes Plaza
Hermeslaan, 1H
B-1831 Diegem, Belgium
Pacific
Contact:
Phone:
Fascimile:
Mail:
Email:
Honeywell Global TAC – Pacific
1300-364-822 (toll free within Australia)
[phone] (outside Australia)
[phone]
Honeywell Limited Australia
5 Kitchener Way
Burswood 6100, Western Australia
[e-mail]
India
Contact:
Phone:
Fascimile:
Mail:
Email:
Honeywell Global TAC – India
[phone]
[phone]
Honeywell Automation India Ltd
56 and 57, Hadapsar Industrial Estate
Hadapsar, Pune –411 013, India
[e-mail]
Korea

Support and Other Contacts
viii Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide R200
Honeywell September 2010
Contact:
Phone:
Fascimile:
Mail:
Email:
Honeywell Global TAC – Korea
[phone]
[phone]
Honeywell Co., Ltd
4F, Sangam IT Tower
1590, DMC Sangam-dong, Mapo-gu
Seoul, 121-836, Korea
[e-mail]
People’s Republic of China
Contact:
Phone:
Mail:
Email:
Honeywell Global TAC – China
[phone]
800-820-0237
400-820-0386
Honeywell (China) Co., Ltd
33/F, Tower A, City Center, 100 Zunyi Rd.
Shanghai 200051, People’s Republic of China
[e-mail]
Singapore
Contact:
Phone:
Fascimile:
Mail:
Email:
Honeywell Global TAC – South East Asia
[phone]
[phone]
[phone]
Honeywell Private Limited
Honeywell Building
17, Changi Business Park Central 1
Singapore 486073
[e-mail]
Taiwan
Contact:
Phone:
Fascimile:
Mail:
Email:
Honeywell Global TAC – Taiwan
[phone]
[phone]
Honeywell Taiwan Ltd.
17F-1, No. 260, Jhongshan 2nd Road.
Cianjhen District
Kaohsiung, Taiwan, ROC
Global-TAC-Tai[email protected]om
Japan
Contact:
Phone:
Fascimile:
Honeywell Global TAC – Japan
[phone]
[phone]

Support and Other Contacts
R200 Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide ix
September 2010 Honeywell
Mail:
Email:
Honeywell Japan Inc.
New Pier Takeshiba, South Tower Building,
20th Floor, 1-16-1 Kaigan, Minato-ku,
Tokyo 105-0022, Japan
[e-mail]
Elsewhere
Call your nearest Honeywell office.
World Wide Web
Honeywell Solution Support Online:
http://www.honeywell.com/ps
Training Classes
Honeywell Automation College:
http://www.automationcollege.com

Symbol Definitions
x Isolated Analog Output Module 2MLF-DV4S, 2MLF-DC4S User's Guide R200
Honeywell September 2010
Symbol Definitions
The following table lists the symbols used in this document to denote certain conditions.
Symbol Definition
ATTENTION: Identifies information that requires special
consideration.
TIP: Identifies advice or hints for the user, often in terms of
performing a task.
REFERENCE -EXTERNAL: Identifies an additional source of
information outside of the book set.
REFERENCE - INTERNAL: Identifies an additional source of
information within the book set.
CAUTION
Indicates a situation which, if not avoided, may result in equipment
or work (data) on the system being damaged or lost, or may result in
the inability to properly operate the process.
CAUTION: Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may also be used
to alert against unsafe practices.
CAUTION symbol on the equipment refers the user to the product
manual for additional information. The symbol appears next to
required information in the manual.
WARNING: Indicates a potentially hazardous situation, which, if not
avoided, could result in serious injury or death.
WARNING symbol on the equipment refers the user to the product
manual for additional information. The symbol appears next to
required information in the manual.
WARNING, Risk of electrical shock: Potential shock hazard where
HAZARDOUS LIVE voltages greater than 30 Vrms, 42.4 Vpeak, or
60 VDC may be accessible.