Honeywell MPD31D User manual

MPD31D
3” Mobile Label Printer
User Manual

1
Catalogue
Introduction································································································2
About this manual ··············································································2
International conventions ······························································2
Related Manuals ·················································································2
Safety instructions··················································································3
1. Standard Accessories······································································ 6
2. Appearance & Parts·········································································· 7
3. Preparation before using······························································· 8
3.1Battery installation ····································································· 8
3.2 Printing paper roll installation············································· 9
3.3 Battery charge ···········································································10
4. Use function·······················································································11
4.1 Basic features ············································································11
4.2 Setting ···························································································11
4.3 Self Testing··················································································13
5. Icons Introduction···········································································15
6. Communication················································································16
6.1 USB Communication ·····························································16
6.2 Bluetooth communication ··················································17
7. Maintenance······················································································18
8. Fault diagnosis ·················································································19
9. Appendix ······························································································20
9.1 Printer Parameters ··································································20
9.2 Battery cycling···········································································21

2
Introduction
About this manual
Thanks for your order about our 3” mobile barcode label printer.
This manual can help you learn how to use this product. Please read this
manual carefully before using it and keep it for future reference.
International conventions
For your convenience, this manual uses the following symbols
(icons) and conventions:
Warning This symbol indicates a warning that improper use
may result in property damage, serious injury or death.
Attention This symbol indicates that improper use may
result in personal injury or damage to the product.
Remarks The symbol identifies the notes that give you better
access to the product or extend the life of the product.
Related Manuals
The following manuals provide detailed information on
various technical issues
1.Command Set: Provide a detailed description of the product
development.
Statement
This product is a Class A product and may cause radio
interference in a live environment. In this case, it may be
necessary for the user to take practical measures to interfere
with it.
The illustrations and text display used in this manual may
differ from the actual ones. Product information has been
in-kind, subject to change without notice.1

3
Safety instructions
Observe the following precautions when using the
printer
Attention Do not disassemble the printer yourself, please read this
manual carefully before using
Warning Turn off the power immediately after a fault. When you find
the printer or charger smoke or smell, please unplug the
charger and remove the battery, be careful to avoid being
burned.
Warning Do not use the printer near flammable materials such as
gas stations or fuel depots.
Warning Always place the printer and charger in a ventilated
environment at an ambient temperature of -5 ° C to 50 ° C
and always use the charger supplied by the dealer. Using an
unapproved charger may be dangerous, while also violating
the provisions of the warranty terms.
Attention Do not open the paper cover while the printer is printing,
otherwise unpredictable conditions may occur and the
printer may be damaged.
Attention After the printing, the print head is still in a high
temperature state, do not touch, so as not to burn.
Attention Do not use solvents such as benzene or thinner to wipe the
printer. Do not touch the printer with corrosive chemicals or
cleaning agents. Use only a clean, soft cloth to gently wipe
the printer.
Attention Use only original or approved paper, as this may result in
poor print quality or damage to the printer core.
Attention If you store the printer for an extended period of time, make
sure to remove the battery from the printer and store it
separately. Failure to do so may cause the battery to fail, or
even leak, and damage the printer.
Attention Before changing batteries, please power off the printer and
cut off the power if connecting the printer with power adapter.

4
Attention The printer could work stably from 0°C to 40°C, but the
higher or lower temperature would debase the print quality.
Attention The storage time of receipts should be related to quality of
the thermal paper. If the user needs to print the long-term
preservation receipt, please use long-acting thermal paper.
Attention This printer is suitable for the area below 2000 meters and
no tropics.
Battery Safety Attention
Attention Please read this user manual and battery surface marks
carefully before using the printer.
Warning Charge the battery in a cool, ventilated room. The ambient
temperature is too high when charging the battery. It will
cause fever, smoky, deformation, combustion and even
explosion.
Warning Battery comes with special protective circuit, please don’t
take apart the battery, otherwise it may cause a short circuit
or electrolyte leakage. If the electrolyte enters the eyes,
there is a risk of blindness. If you accidentally enter the eyes,
please do water rinse immediately and immediately go to
the hospital.
Warning Please do not squeeze the battery, mechanical vibration or
shaking the battery, the use of battery short circuit is strictly
prohibited.
Warning Please do not put the battery into the water, so as not to
cause internal short circuit, causing the battery heat, smoky,
damage or explosion.
Warning Do not expose the battery to direct sunlight or high levels of
smoke and dust, or in high humidity environments such as
bathroom.
Attention Replace it if the battery does not meet the performance
requirements.

5
Attention Keep the battery in a safe place out of the reach of children
in case of danger.
Attention Once the battery discoloration or deformation etc., please
stop using immediately.
Attention When Using Battery Charger
Attention Before use, please read this manual and charger surface
marks.
Warning Please do not disassemble or refit the charger, it is strictly
prohibited in the case of the power cord damage using
charger, otherwise it will cause electric shock, on fire and
damage of the charger.
Warning Please don't use wet hand contact with the charger, if the
charger comes into contact with the water or liquid, should
immediately cut off power supply.
Warning Please do not short circuit battery chargers, mechanical
vibration or shaking the charger.
Warning Please do not use the charger in the bathroom where has
high humidity. The device is not waterproof, it is forbidden
to make it in the rain or moisture.
Warning Seize charger when unplug, pull the power cord will damage
the wires.
Attention Please put the charger in the safe place where children are
not exposed to, in case of any danger.

6
1. Standard Accessories
Standard Accessories
If any items are damaged or missing, please contact your supplier

7
2. Appearance&Parts
Front view
Back
B
attery

8
3. Preparation before using
3.1 Battery installation

9
3.2 Printing paper roll installation
1. Take down the sealing tape on printing paper roll;
2. Press cover-open button and open paper tank;
3. Put paper roll into paper tank;
4. Pull out a length of paper along with paper-out opening.
Remark:
1. Paper specification used by printer is: paper width 80mm
2. Pay attention to direction of paper roll. If it's revered, it may
cause empty printing or non-process paper-feeding.

10
3.3 Battery charge
Standby charge
Plug power adapter into power outlet and plug USB interface into the
printer
Charging Port:AC:110V~240V(50/60Hz)
Charging: Battery indication symbol battery status bar scrolling
displays.
Charging complete: The icon indicate the battery is fully
charged, the buzzer will the sound alarm.
Warning
If use power adapter that is not provided or accepted by our company, it
may damage printer.
Remark
It can print during changing.
Attention
Please don't fetch out battery during charging.

11
4. Use function
4.1 Basic features
Power on: Keep pressing power button for 3 seconds.
Power off: Keep pressing printer power button during starting up, then
printer closes.
Paper feeding: Press the feed button(Under the continuation paper model
then paper feed for 5mm. press paper feed button in label / black label
model, paper feeding to label gap or black label).
Sleep wake: When printer start up if there is no pressing operation or data
transmission within 5 seconds, printer will enter into dormant status
automatically.
if press power button will wake the printer
(The printer will wake up automatically when it receives data).
4.2 Setting
Enter setting interface: Long press set button to enter selection interface
under on status (non-dormant status).
Press set button: Enter to set next selection.
Press paper- feeding button: Change option parameter.
Press power button: Confirm set.

12
Print Info Press power key to print self testing page
Set wide range resolution
(Coarse adjustment)
0-4
0-4 Setting small range resolution
(fine adjustment)
0-4 print speed Setting
Chinese/English Language Setting
Open/Close Beepingon/off
Gap/Mark/None Paper Types Setting
Open/Close Set whether to turn on the paper
Open/Close Set whether to turn on the paper
10/30/60/99 Set the screen saver display
1-5 Setautomaticshutdown

13
4.3 Self Testing
The print self-test page has the details of the printer and
Communication interface configuration, etc.
Product Parameters
Selftest
Firmware Version: A43B1C3D1F0_V1.11 2018-11-02
Model:..................................Mobile printer
Interface:............................USB
&BlueTooth
Code Page:.........................GBK
Print Method:....................Direct Thermal
Print Quality:......................2
Print Density::....................2
Print Speed:........................4
Font:.......................................24x24GB 18030汉字字库
Media Type:........................Label
Instruction Set:.................CPCL
Dpi:..........................................203
Print Size Parameter
Size:..................................72 mm, 100mm
Reference:.....................0mm, 0mm
Shift:................................0mm
Offset:.............................0mm
MILAGE(m)..................1.539999
Voltage/Temperature
[POWER & DEGREE]
VOLTAGE: 7.793 DEGREE: 28

14
Bluetooth Parameters
[BlueTooth Configure]
EDR NAME:..................Mobile printer-5BC1
EDR PIN:........................0000
EDR ADDR:...................DC-0D-30-0F-5B-C1
BLE ADDR:....................DC-0D-30-0F-5B-C1
BT Ver:.............................5.7.7,FSC-BT826
Bluetooth information can setup by setting tool, the details pls
check <Setting tool manual>

15
5. Icons Introduction
Print Status The icon display at screen when printing.
Insert Paper
Battery Indicator The grids will running on charging.
Bluetooth
The icon display at screen when paper
ending or wrong paper install.
Paper End
Cover
Opening Close Cover The icon display at screen when cover open or
closed in wrong operation.
The icon will display if the printer has
bluetooth funciton

16
6. Communication
6.1 USB Communication
3"moboile label printer applies Micro USB interface, if connected to PC as
blew, can perform operations such as charging, setting and transmitting
data.

17
6.2 Bluetooth communication
3'Mobile Label Printer has both models Bluetooth 4.0 (SPP+BLE) ,it can
communicate with iPhone, iPad, Android. The effective communication
distance is less than or equal to 10 meters. It support for AirSync protocol
and can use Bluetooth function on the Wechat platform.
Bluetooth default pairing password: 0000, it can be setting up with
parameter settings. For more details see «Tool setting manual».

18
7. Maintenance
7.1 Printer daily maintenance
1. Clean printer exterior and paper tank: please scrub printer surface and
paper tank interior slightly with wringed wet cloth. Pay attention to that
wet cloth must be wringed out completely.
2. Clean printer mechanism: printer mechanism must be cleaned regularly,
especially when printing quality decrease. Cleaning method is as follows:
scrub printer mechanism surface spots and residual gum on label paper
with degreasing cotton dipping with anhyrous alcohol until scrubbed
clearly.
3. If discover there is water in printer interior, please close printer and fetch
out battery immediately and let printer dry naturally.
4. If printer won't use for long-time, please fetch out battery and preserve it
separately.
7.2 Printing paper usage and preservation
1. New purchased printing paper shall avoid direct sunlight or preservation
in high-temperature locations. Please don't tear packaging paper during
preservation.
2. The receipt after printing shall be preserved under condition of normal
temperature (about 20°C) and lucifuge. This can prolong receipt
preservation period effectively.
3. If users need to preserve receipt for a long period, please select
long-acting thermosensitive printing papers.

19
8. Fault diagnosis
Fault phenomenon Fault reason Solution
Printer only feeds
paper during printing,
and has no printing
data.
Printing paper is
installed upside down.
Change printing
paper installation
direction.
Printer movement is
polluted due to
long-term not being
cleaned.
Movement needs to
be cleaned.
Printer prints blurrily
Printing paper
coloration is not good.
Please set higher
blackness or use
printing paper with
better coloration.
Printing paper quality is
not good.
Please use thermal
printing paper with
long retention
period.
Printed receipt
characters become
fuzzy within several
months or even
several weeks.
Preservation
temperature of receipt
is too high.
Please preserve
under normal
temperature (about
20 °C)