Honeywell RK-MIC Instruction sheet

M_2000060504_EN_1.0
INTEVIO-Remote Call Station
Product Instructions
Model：RK-MIC
M_2000061162_UL_1.1

1
Precautions
Danger
This sign reminds users of “dangerous voltage” on the
product.
Caution
This sign reminds users of important instructions
attached to the product.
Safety
guideline
In order to prevent electric shock, this equipment plug
shall not be used as conductor to extend power supply
line.
Do not block the equipment’s ventilation opening or put
other equipment on it.
Safety
guideline
Protect this equipment against rainwater or moisture so
as to avoid fire or electric shock.
Unpacking
After removing the amplifier from the carton, inspect for any exterior
damage to the unit. If damage is noted, notify the carrier at once so
that a claim can be justified. Save all packing material. This is
important when the claim is processed.

2
Ventilation
To offset heat generated by the unit, it is necessary to provide ample
ventilation around the unit. Avoid blocking or impeding the ventilation holes
on the unit. To prevent unnecessary problems, install the unit in a place
free from any vibrations, direct sunlight, humidity or dust circulation.
Prevent liquids or other materials to enter cabinet
If the unit gets wet or any foreign material enters the amplifier cabinet,
immediately disconnect the AC power cord and consult your dealer or
qualified technician.
Important Safety Instructions
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install on or near any heat sources such as radiators, heat
registers, stoves or other apparatus (including amplifiers) that produce
heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Only use the attachments/accessories specified by the manufacturer.

3
Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or
when unused for long periods of time.
Refer all servicing to qualified service
personnel. Servicing is required when the apparatus has been
damaged in any way such as power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
WARNING –To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
The mains plug is used as disconnecting device and shall remain
readily operable.
The apparatus is unsuitable for use in air-handling spaces.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Network Security
Placement
Please put the device in a safe place, lock the cabinet and keep the
keys well.
The access control system of the central control room should be under
strict management.
Any person except authorized maintainer is forbidden to disassemble
or change parts of device.
It is forbidden to communicate X-618 system with third party system
unless updating the configuration.

4
Password Precaution
Please change the password during the system deployment.
Users need to change the password regularly.
The password with six numbers is preferred.

5
Product Overview
The RK-MIC is used to perform various broadcasts and live announcement
in zones. It has programmable buttons, which allows users toeasily conduct
operations, such as paging, BGM broadcast, business broadcast, volume
control, recording, monitoring, etc. If necessary, extension key modules can
be connected to RK-MIC for more buttons.
Features
Supports gooseneck or PTT microphone for live broadcast.
Built-in loudspeaker to monitor CH1/CH2 audio.
Temporary recording function.
Line input interface to connect to external BGM audio source.
The volume of microphone, line input, and loudspeaker can be set via
the volume regulators at the rear panel.
8 programmable buttons, able to be configured by software.
Supports extension key modules as required.
Automatic supervision of microphone and communication.
The distance between RK-MCU and RK-MIC can be up to 600 meters
via twisted-pair cable.
Call station can be powered by RK-MCU.
Up to 6 remote call stations can be connected to the system.
Functions
Live broadcast
Business broadcast
BGM broadcast
Temporary recording function
Monitoring function
Fault supervision
Volume control function

6
Front Panel
No.
Buttons/Indicators
Description
1
Microphone socket
Connection for gooseneck or PTT
microphone.
2
Device status
indicator lights
Indicators for power supply, general fault of
the system, network fault and busy status of
audio bus, etc.

7
No.
Buttons/Indicators
Description
3
Manually
emergency button
To avoid accidental activation, a protective
cover is installed over the Emergency button.
The indicator light is off in standby mode.
When microphone is active, the light turns
green. When a microphone fault is found, the
light turns orange.
4
Function buttons
Function buttons, such as ALL, CLOSE,
MONITOR CH1, MONITOR CH2, RECORD,
PLAYBACK, LINE IN, MICROPHONE, etc.
5
Label
Programmable key label.
The name or function of the programmable
keys can be written on the label.
6
Programmable
buttons & indicators
8 programmable buttons and corresponding
indicators.
7
Loudspeaker
Built-in loudspeaker for monitoring the audio
source in the system.
Rear Panel
No.
Parts/Ports
Description
1
MIC volume
The volume of microphone.
2
Line volume
The volume of line input.
3
Loudspeaker
volume
The volume of loudspeaker.

8
No.
Parts/Ports
Description
4
Line input
Connection for external audio devices, such
as CD/DVD player, tuner, etc.
5
Debug interface
Interface to upgrade the firmware.
6
Address
DIP switch is used to set device address.
The former 3 pins are used to set device
address, the last one is used to set end-of-
line resistor.
7
Up link
Connection to RK-MCU or former remote
call station.
8
Down link
Connection to next remote call station.
9
Power adapter
interface
External power adapter, to be used if the
device can't be powered by the RK-MCU.

9
Technical Specifications
Parameters
Values
Power supply
24V DC
Power consumption
10 W
Microphone
Sensitivity
-50dB±3dB
SNR
60dB, A-weighted
Optimal pickup distance
10～20cm
Line Input
Input signal
1V(0dBV)
Input impedance
10 KΩ
Frequency response
80Hz-18KHz, ±3dB
SNR
>85dB, A-weighted
THD
<0.1%
Others
Built-in loudspeaker
2W/8Ω
Working Conditions
Relative humidity
95%, without condensing
Operating temperature
-10C~+55C(14F to +131F)
Storage temperature
-40C~+70C(-40F to +158F)
Specification
Dimension (W*H*D)
7.87 x 1.83 x 7.87 inches
Packing dimension
(W*H*D)
15.87 x 5.24 x 10.55 inches

10
Parameters
Values
Net weight
3.09 lbs
Gross weight
5.51 lbs

11
Packing List
No.
Components
Qty.
1
RK-MIC
1
2
Gooseneck microphone
1
3
Windshield
1
4
24V DC power adapter
1
5
Twisted-pair cable (2m)
1
6
Labels
2
7
Debug interface terminal (3.81-3P)
1
8
Audio cable
1
9
Desktop bracket
1
12
Product instructions
1

Honeywell Security and Fire
12 Clintonville Road, Northford, CT 06472, USA
Tel: [phone]
Manufacturer: Life Safety A/V (Guangzhou) Co., LTD
No.257, Junye Road, Guangzhou GETDD, East 510530, China
Tel: [phone]
Fax: [phone]
©2017 Honeywell International Inc. All rights reserved.