Honeywell FocusPRO Wi-Fi TH6000 Series User manual

Quick Reference Gard
Graspand
pull
tosee
basicoperatinginstructions
ataglance.
Battery Holder
Press
down andpull
to remove
batteries.
Batteries
shouldbereplaced
once
a year
(see
page
17).
This manual covers the following models:
TH611OD:For
1 HeaVl Goolsystems
TH622OD:For
upto 2Heatl2 Cool
systems
TH632OU: Forup to 3 Heatl2 Cool systems
(Remove
battery holderto find model number)
NeedHelp?
Forassistancewith this product pleasevisit http://yourhome,honeynre[.com
or callHoneywell
CustomerCaretoll-free
at l-8OO-469-15O2
Read
andsavethese instructions.
@U.S.BegisteredTrademark.
Patents
pending.
Copyright
@
2006Honeywell
InternationalInc.
Allrightsreserved.
FocusPRO'"
TH6000Series
OOO
About your new thermostat
Thermostat
features...................................
2
Programming
ata91ance..........................
3
Quick
reference
to contro|s.......................
4
Quick
reference
to display
........................
5
Programming & Operation
Settimeand
day........................................
6
Select
fansetting
(auto/on).......................
7
Select
system
setting
(heaVcool)..............8
Using
program
schedules
.........................
I
Program
schedule
overrides...................12
Auto-changeover
(heaVcool)...................14
Compressor
protection............................
15
Adaptive
Intelligent
RecoveryrM..............
1
6
Appendices
Battery
replacement ........17
I
n
case
ofdifficu|ty...................................
1
B
Customer
assistance
...............................
20
Accessories/replacement
parts
.............
.20
S-year
limited
warranty............................
21
Thisthemostat is readyto go!
Your
newthermostat
ispre-programmed
and readyto go.
Seelagc_3 to check settings.
CAUTION:
EQUIPMENTDAMAGE
HAZARD.Topreventpossible
compressor
damage,do not operate
coolingsystemwhenoutdoor
temperatureisbelow50"F
00"C).

Operating Manual
congratulations
on the purchase
of your new Honeywell
thermostat.
lt hasbeen
designedto giveyou many
yearsof reliable
service
andeasy-to-use,
push-button
climate
control.
Features
. Separately
programmable
weekday/weekend
schedules.
o One-touch
temp controloverrides
program
schedule
at anytime.
. Energystar compliantto greatly
reduce
your heating/cooling
expenses.
o Large,
clea6backlitdisplayis easyto read
- eveninthe dark.
. Displays
both roomtemperature
andtemperature
setting.
r Removable
batteryholderfor fast,easyreplacement.
r Built-in
compressorprotection.
FocusPRO'"TH6O00
Series
Yournewthermostatis pre-programmed
and readyto go.Allyou haveto do is set
the time and day.Thencheckthe settingsbelowand change
if needed:
1. Set time and day (required for proper operation).. ..Seepage6
2. Select fan setting (Auto/On): Preset
to Auto.................To
change,seepage7
3. Select system setting (HeaUcool): Presetto Heat......7o
change,seepage 8
4. Program schedules: Preset
to energy-savinglevels
whileyou'reat work or
asleep(assumesyou wakeat 6 am, leaveat 8 am, return
at 6 pm andgo to
bedat 10
pm)......... ............Io
change,see
pages
9-77
ONE-TOUCHTEMP CONTROL: You
canoverridethe program
schedule
at anytime,and
manuallyadjust the temperature(seepages 12-13).

OperatingManual
Digital display (see
page5).
Function Buttons
Press
to selectthefunctiondisplayed
just aboveeach
bufton.
(Functions
changedependingonthe task.)
Temperature
Buttons
Presstoadjusttemperature
settings
(seepage
11-13).
Hold Button
Pressto override
programmedtemperature
control
(see
page
13).
FocusPRO"'
TH6O00
Series
Current inside temperature
In Recovery
(see
page16)
Current program period
Wake/Leave/Retu
rnlSleep
(seepages
9-11)
Set Glock/DaylSchedule
(see
pages
6 & 'l 1)
Function buttons
Press
the button beneath each function to
viewor changesettings (functions
change
depending
onthe task)
Low battery warning
(seepage.17) Current time/day
(seepage 6)
Temperature setting
(see
pages
11-13)
Auxiliary heat
(Only
for heat
pumps
withauxiliary
heat)
System status
Heat
On/Cool
On(lf
flashing,
see
page'15)
System sefting
HeaUCool/AutolOtt/Em
Heat(seepage B)
Fan setting
Auto/On (seepage 7)
Wake Wed HeatOn

OperatingManual
1.
2.
Pressthe SETCL0CIVDAY/SCHEDULE
button, then press A or V to set
the clocktime.
Press
the SETDAY
button,
then
press
A or V to selectthe day
of the week.
3. Press
D0NEto save
&exit.
Note: lf the SETCLOCIODAY/SCHEDULE
optionis notdisplayed,
press
D0NE
or RUN
SCHEDUIE.
Note: lfthedisplay
flashes
SetClock,
thethermostat
willfollow
your
settings
for theweekday
"Wake"
timeperiod
until
you resetthe time and day.
PressSETDAY,then select current day
\,/r'ed -&l
nmm'ffi
FocusPRO'"
TH6O0O
Series
iet ClocUDay/
Schedule
ran Svstem
Auto Fteat Pressthe FAN
buttonto select
Auto or On.
In"Auto" mode(the
mostcommonlyused
setting),thefan runsonlywhenthe heating
or coolingsystemis on. lf setto "On,"the
fan runscontinuously.
Use
thissettingfor
improved
aircirculation,
or for moreefficient
aircleaning.
letClocuDay,
Schedul€
Fan System
Ott Heat

OperatingManual
Fan System
tei utoovuay
Scheduk Auto Heat
-Tuto -
Note: TheAutoand EmHeat
system settings may not
appear,
depending
on howyour
thermostat was installed.
Press
theSYSTEM
buttonto select:
Heat Thermostat
controls
onlythe
heating
system.
Gool:Thermostat
controls
onlythe
coolingsystem.
Off: Heating
and coolingsystems
areoff.
Auto: Thermostat
automatically
selects
heating
orcooling
depending
onthe
indoor
temperature.
Em Heat (only
for heatpumpswith
auxiliary
heat):
Thermostat
controls
Emergency
andAuxiliary
Heat.
Compressor
is lockedout.
a
o
FocusPRO'"TH6000
Series
It'seasyto programyour systemformaximum energysavings.Youcan
program
four
timeperiods eachday,withdifferentsettings
forweekdays
andweekends.
WAKE Setto thetime you awakenand thetemperature
you wantduring
6.00ap the morning,
untilyou leavefor the day.
1no
tu
LEAVE Setto the time you leavehomeand thetemperature
you want
e.OoJT whileyou areaway(usually
an energy-saving
level).
l- 10
trtr
RETURN Setto the time you returnhomeandthe temperature
you want
6:00
pm duringthe evening,untilbedtime.
1n"
tu
sLEEp Setto the timeyou go to bed andthe temperature
you want over-
10:00
pm night(usually
an energy-savinglevel).
,-?o
ntr
d
I|rIJ]
I
l-. I
lllr ll
E
lrlr il
E

Operating
Manual
Thisthermostatis pre-set
to useEnergyStaf program
settings.
we recommend
these
settings,
sincethey can reduce your heating/cooling
expenses
by as muchas 33%.
(See
next pageto adjusttimesand temperatures
of eachtime period.)
Heat (Mon-Fri) Cool Heat (Sat-Sun) Gool (Sat-Sun)
Wake
(6:00
am)
Return
(6:00
pm)
Sleep
('10:00pm)
Leave
(8:00
am)
10
FocusPRO"'
TH6O00
Series
--------lfEn ---) Fvstem
----)
lset
clocuDay/ll
-Tii6-l l------eod-l
I schedurell Il I
a3€)
Done a3c)
Heat
Setting
Set
Schedule t- -P
E'CC*"
hf
MonTue
WedThuFri
',(})
' @t)
16
Done Iext
PressSET
CL0CIVDAY/SCHEDULE.
then SET
SCHEDULE.
Press
A or ! to set yourweekday
Wake
time (Mon-Fri),
then press
NEXT.
Press
A or ! to setthe temperature
for this
time period,
then press
NEXf.
4. Settime andtemperature
for the nexttime
period(Leave).
Repeat
steps2 and 3 for each
weekdav
time period.
5. Press
NEXT
to set weekend
time periods (Sat-
Sun),then pressD0NE
to save& exit.
Note:Make
surethethermostat
issettothesystem
you
want
to program
(Heat
orCool).
Note:You
can
press
CANCETPERIOD
toeliminateunwanted
time
periods
(except
Wake).
11

Operating
Manual
Press
to temporarily adjust temperature.
'1"F,Jc*
Pressto cancel temporary setting and
resume
program
schedule.
Note: Make surethe thermostat is set
to the system you want to control (heat,
coolor auto).
Press
A or! to immediately adjust
the temperature.Thiswilltemporarily
overridethetemperature
setting
for the
currenttime period.
Thenewtemperature
will be
maintained
onlyuntilthe next
programmed
time periodbegins(see
page10).Forexample,if you wantto
turn upthe heatearlyinthe morning,
it will automatically
be loweredlater,
whenyou leavefor the day.
Tocancelthe temporary
settingat any
time,press RUN
SCHEDULE.
12
FocusPRO'u
TH6000
Series
lnside Heat
E'l 'ro^"T,Ht
Pressto permanentlyadjust temperature.
G'
Press
to cancel"Hold" settingand
resume
program
schedule.
Note: Make surethe thermostat is set
to the system you want to control (heat,
coolor auto).
PressH0LD
to permanentlyadjust
thetemperature.
Thiswilloverride
thetemperature
settings
for alltime
periods.
The "Hold" feature
turnsoffthe
program
schedule
andallows
you to
adjustthe thermostat
manually,
as
needed.
Whatever
temperature
you set will
be maintained
24 hours
a day,until
you manually
changeit,or press
RUN
SCHEDUTE
to cancel"Hold" and resume
the programmed
schedule.
13

OperatingManual
tetClocuDay
Scheduk
Fan Svstem
Auto Auto
Press
untilscreen
displays
"Auto"
Note: The Auto system setting
maynot appear,depending
on
how your thermostat was installed.
Auto Changeover
isa feature
usedincli-
mateswhereboth air conditioning
and heat-
ingareusedon the sameday.Whenthe sys-
tem issetto Auto,the thermostat
automati-
callyselectsheating
or coolingdepending
on
the indoortemperature.
Heatandcool settingsmust be at least3
degreesapart.Thethermostat
willautomati-
callyadjustsettingsto maintain
this
3-degreeseparation
(called
"deadband").
The3-degree
separationbetween
heating
and coolingsettemperatures
isfixed,and
cannotbe changed.
14
FocusPRO'"
TH600O
Series
@
lnside
-15 Cool
Setting
15"Thisfeature
helpsprevent
damageto the
compressorinyourairconditioning
or heat
pump system.
Damage
can occur ifthe compressoris
restarted
too soonaftershutdown.Thisfea-
ture forces the compressor to wait for a few
minutes
beforerestarting.
During
the wait time,the displaywillflash
the message
CoolOn (orHeat
On if you have
a heatpump).Whenthe safewait time has
elapsed,the message
stopsflashing
andthe
compressor
turnson.
E,JBo*
Messageflashes until safe restad
time haselapsed

Operating
Manual
AdaptiveIntelligent
Recovery
eliminates
guesswork
whensetting
yourschedule.
It allowsthe thermostat
to "learn" how longyourfurnace
and airconditioner
take
to reach
thetemperature
you want.
Just set your program
schedule
to the time you want the house
to reach
yourdesired
temperature.
Thethermostat
then turnson the heating
or coolingat just the right
time
to reach
yourscheduled
temperature
at your scheduled
time.
Forexample:
set the wake timeto 6 am and the temperature
to 70".
Theheat
will
come on before6 am,so the temperature
is70o
by the timeyou wakeat 6.
Note: when Adaptive
Intelligent
Recovery
isineffect,thethermostat
wilt
display
"ln
Recovery".
FocusPRO'"
TH6000Series
Press
andpull
to remove
InsertfreshAA alkaline
batteries,then reinstall
battery holder. =-==-_
Batteries
areoptional(toprovide
backup
power)
ifyourthermostatwas wiredto runon
AC powerwhen installed.
Installfreshbatteriesimmediatelywhenthe
REPLACEBATTERYwarningbeginsflashing.The
warningflashes
abouttwo monthsbeforethe
batteriesaredepleted.
Evenifthe warningdoes not appeaq
you
shouldreplace
batteriesoncea year,
or
beforeleavinghomefor morethana month.
lf batteries
areinserted withintwo minutes,
the time and daywill not have
to be reset.
Allothersettingsarepermanently
storedin
memory and do not require battery power.
17

OperatingManual
lf you havedifficultywith yourthermostat,
please
try thefollowing
suggestions.
Most problems
can be correctedquicklyand easily.
Display is blank r Check circuit breakerand reset if necessary.
. Makesurepowerswitchat heating
& coolingsystemis on.
. Make sure furnace door is closed securely.
. lf thermostat is battery powered, make sure fresh AA alkaline
batteries arecorrectly installed (seepage 17).
Temperature Make sure heatingand cooling temperaturesareset to acceptable ranges:
settings do not . Heat:40"to 90"F
(4.S"
to 32.C).
change . coot: 50"to 99"F
(10"
to 37.C).
To restore Followthese steps to restoreEnergyStardefault seftings (seepage 'l0):
Energy Star" 1. pressSET
CLSCVDAy/SCHEDULE.
default settings 2. press SETSCHEDULE.
3. Press001'lE
and I'IEXT at the sametime for 4 seconds.
FocusPRO*TH6O0OSeries
18
Heating or
cooling system
does not respond
"Cool Onttor
r'l{eat On" is
flashing
a
a
a
a
a
PressSYSTEMbutton to set system to Heat. Make sure the temperature
isset higher
thanthe Insidetemperature.
PressSYSTEMbutton to set system to Cool, Make surethe temperature
isset lowerthanthe Insidetemperature.
Check circuit breakerand reset if necessary.
Make sure power switch at heating & cooling system is on.
Make sure furnace door is closed securely.
Wait 5 minutes for the system to respond.
Compressorprotectionfeatureis engaged.Wait5 minutesfor the system
to restartsafely,without damageto the compressor(see
page 15).
19