Honeywell Perfect Climate Comfort Center PC8900 User manual

69-0892—1 5 J.S. Rev. 2-96 ©Honeywell Inc. 1996
Printed in Mexico
M6260
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY VENTILATE
RUN
SYSTEM
HEAT OFF COOL FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
69-0892-1
SYSTEM
SYSTEM
HEAT OFF COOL
HUMIDITY
TEMPORARY
HEAT/COOL
SETPOINTS
FAN
AUTO ON CIRC
VENTILATE
HEAT SET PT COOL
HOLD
TEMPORARY
FAN
CIRC
TEMPORARY VENT
FAN
CIRC
See Owner’s Guide, form 69-0891 for more information or call
1-800-468-1502.
Press Display
b. Vacation hold for 1 to
7 days, use step a
(hold indefinitely) and
then use the following
steps
c. End hold
Checking Readings and Settings
a. Press check
repeatedly to see room
humidity, outside
temperature, fan
setting, ventilator and
system settings
DAY
TIME
TIME
RUN
AM
MON
CANCEL
CHECK
HEAT SET PT COOL
SUN MON TUE WED THU FRI SAT
AM

SUN MON TUE WED THU FRI SAT
AM

5. Programming
System,
Humidity and Frost Press Display
a. Set system
b. Set % humidity (to
program your frost
setting if outdoor
sensor is installed,
press humidity key a
second time)
Changing the Program Temporarily
a. Changing the temp-
erature temporarily for
current period
b. Changing the fan
setting temporarily for
current period
c. Changing the vent
setting temporarily for
current period
Holding the Program
a. Hold indefinitely As an ENERGY STARSM partner,
Honeywell has determined that this
product meets the ENERGY STARSM
guidelines for energy efficency.
Quick Guide

Press Display
i. Repeat steps 3b-h to
program LEAVE,
RETURN and SLEEP
for the first day
j. Copy program to rest
of the days (Hold DAY
key to display each
weekday)
k. Exit programming
mode (saves program)
4. Changing the Program
a. Enter program mode
b. Locate desired day
and period
c. Change time
d. Change temperature
e. Change fan setting
f. Change vent setting
g. Exit program mode
69-0892—1 2 3
Quick Guide
NOTE: Press the RUN key at anytime to exit programming.
4 69-0892—1
WAKE
MON
AM
WAKE
SAT
AM
LEAVE
SAT
AM
PM
SUN
RUN
SELECT
PERIOD
DAY
SELECT
PERIOD
M6260
CHECK
SET
CLOCK
HEAT/COOL
SETPOINTS
SELECT
PERIOD
CANCEL
HOLD
HUMIDITY VENTILATE
RUN
SYSTEM
HEAT OFF COOL FAN
AUTO ON CIRC
DAY
TIME
TIME
SYSTEM
Press Display
e. Set the temperature for
heating
f. Set the temperature for
cooling
NOTE: If you lower cool temperature closer than 3°, the heat setpoint
will lower to keep the 3°differential (in AUTO).
g. Choose fan operation:
• AUTO—on with
equipment
• ON—fan on
continuously
• CIRCULATE—on at
least 30% of the time
h. Choose outdoor air
ventilation (if installed)
WAKE
AUTO
FAN
HEAT COOL SET PT
AUTO

FAN
WAKE VENT
HEAT COOL SET PT
HEAT COOL SET PT
HEAT SET PT COOL
HEAT COOL SET PT
AUTO

FAN
WAKE
HEAT COOL SET PT
AUTO

FAN
WAKE
HEAT/COOL
SETPOINTS
HEAT/COOL
SETPOINTS
FAN
AUTO ON CIRC
VENTILATE
1. Set the Clock Press Display
a. Enter clock setting
mode
b. Set current day
c. Set current time
d. Exit clock setting mode
2. Starting Over
a. Optional: Clear all
programming (press
SELECT PERIOD and
hold CANCEL until
PROG CLR is
displayed)
3. Program 1st Day
a. Enter program mode
b. Select a day, start with
Monday
c. Select a period, start
with WAKE
d. Set the period starting
time
PM
MON
PM
SUN
SLEEP
SUN
PM
SUN
SLEEP
SUN
MON SLEEP
WAKE
MON
PM
SUN
MON
AM
SET
CLOCK
DAY
TIME
TIME
RUN
SELECT
PERIOD
CANCEL
SELECT
PERIOD
DAY
SELECT
PERIOD
TIME
TIME
HEAT COOL SET PT
PM
SUN
RUN
LEAVE
SAT
AM
TIME
TIME
HEAT COOL SET PT
AUTO
FAN
LEAVE VENT
VENTILATE
AUTO
FAN
LEAVE
HEAT COOL SET PT
FAN
AUTO ON CIRC
RETURN
PM
THU
DAY