Honeywell Prestige User manual

Prestige®
Touch Screen
Thermostat
User Guide
TM

Welcome
Congratulations on your purchase of a
Honeywell touch screen programmable
thermostat. When used with the optional
RedLINK Internet Gateway, you can remotely
monitor and control the heating and cooling
system in your home or business—you
can stay connected to your comfort system
wherever you go.
Honeywell’s Total Connect Comfort is the
perfect solution if you travel frequently, own
a vacation home, a business or manage
an investment property or if you are simply
looking for peace of mind.

169-2740EFS—01
Features of your Prestige thermostat
With your new thermostat, you can:
• Connect to the internet to monitor and control your heating/cooling system
and receive alerts by email (requires optional RedLINK Internet Gateway)
• View outdoor temperature and humidity (requires optional Wireless
Outdoor Sensor)
• Control humidification, dehumidifcation or ventilation
Your new thermostat also provides:
• Adaptive Intelligent Recovery—over time, the Prestige thermostat “learns”
how long it takes your system to reach the temperature you want. It turns
on the heating or cooling system earlier to make sure you’re comfortable
at the time you expect.
• Dealer information on the screen—making it easy for you to contact your
dealer for service.
• Vacation and holiday scheduling—allowing you to program a setback
temperature to save energy while you are away.
• Keypad lockout to prevent unauthorized changes.
• Equipment status—provides on/off status of all equipment controlled by
the thermostat.
• Preferences—allowing you to customize the thermostat to your desired
settings.

69-2740EFS—01 2
Programming and Operation
Quick reference........................................... 3
Setting the time/date...................................5
Setting the fan.............................................6
Setting system mode ..................................7
Preset energy-saving schedules.................8
Adjusting program schedules......................9
Schedule overrides ...................................12
Menu Options
Viewing equipment status.........................14
Setting vacation, holiday, and events........15
Setting holiday/event schedules:
commercial use.........................................16
Setting humidification and
dehumidification ........................................23
Setting ventilation...................................... 26
Setting preferences...................................27
Cleaning the thermostat screen................28
Security settings........................................29
Viewing dealer information........................30
Advanced features ....................................31
Appendices
Installer options.........................................32
Replacing batteries ...................................33
Temperature and humidity display ............35
Optional accessories.................................37
Troubleshooting......................................... 39
Regulatory information..............................41
Table of contents

369-2740EFS—01
Quick reference: residential use
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here
to set a program schedule.
Current schedule. Touch an arrow to
change temperature setting and select a
Temporary or Permanent Hold.
Indoor conditions. Shows indoor
temperature and humidity.
Current date and time.
Current status. Shows system mode (heat/
cool), outdoor temperature and humidity
(with optional outdoor sensor).

69-2740EFS—01 4
Quick reference: commercial use
HOME. Touch to display Home screen.
FAN. Select fan mode.
SYSTEM. Select system mode (Heat/Cool).
MENU. Touch to display options. Start here to set
a program schedule.
Thermostat location. Quickly identify which
thermostat is in control of a specific area.
Current schedule. Touch an arrow to change
temperature setting and set a temporary hold.
Override. Touch to temporarily override the
program schedule.
Indoor conditions. Shows indoor temperature
and humidity.
Current date and time.
Current status. Shows system mode (heat/cool),
outdoor temperature and humidity (with optional
outdoor sensor).
USB port. Use USB device to load holiday
schedules and custom events.

569-2740EFS—01
Setting the time/date
1 Touch the current time. The screen
displays Set Time/Set Date.
2 Touch Set Time or Set Date.
3 Touch sor t until the proper time/date
is displayed.
4 Touch Done to save or Cancel to ignore
changes.
NOTE: The thermostat will automatically
switch to and from Daylight Saving Time.
Fri, Jun 14, 2013
6:30 pm
Done
30

69-2740EFS—01 6
Setting the fan
1 Touch FAN to display fan settings.
2 Touch On, Automatic, Circulate, or Follow
Schedule.
3 Touch Done to save and exit.
On: Fan is always on.
Automatic: Fan runs only when the
heating or cooling system is on.
Circulate: Fan runs randomly about
35% of the time (residential use only).
Follow Schedule: Fan controlled by
program (see pages
8 – 13 ).
NOTE: In commercial use, touch
Auto or On to temporarily override the
programmed fan schedule.
FAN
Done

769-2740EFS—01
Setting system mode
1 Touch SYSTEM to display system settings.
2 Touch desired option:
Heat: Thermostat controls only the
heating system.
Cool: Thermostat controls only the
cooling system.
Off: Heating/cooling systems are off.
Automatic: Thermostat selects heating
or cooling as needed depending on the
indoor temperature.
Emergency Heat (heat pumps
with aux. heat): Controls auxiliary/
emergency heat. Compressor is locked
out.
3 Touch Done to save and exit.
NOTE: The Automatic and Emergency
Heat system settings may not appear,
depending on how your thermostat was
installed.
SYSTEM
Done

69-2740EFS—01 8
Preset energy-saving schedules
This thermostat uses default Energy Saver settings that can reduce your heating/
cooling expenses by as much as 33%. To customize settings, see next page.
Wake 6:00 am 70° 78° 70° 78°
Leave 8:00 am 62° 85° 62° 85°
Return 6:00 pm 70° 78° 70° 78°
Sleep 10:00 pm 62° 82° 62° 82°
Cool
(Mon-Fri)Start time
Heat
(Mon-Fri)Period
Heat
(Sat-Sun)
Cool
(Sat-Sun)
Residential Use
Occupied 1 8:00 am 70° 75° On
Unoccupied 1 10:00 pm 55° 85° Auto
Occupied 2* 12:00 am 70° 75° On
Unoccupied 2* 12:00 am 55° 85° Auto
CoolStart time HeatPeriod Fan
Commercial Use
* Period 2 is cancelled by default. If you activate it, the values shown above are
default settings.

969-2740EFS—01
Adjusting program schedules
1 Touch MENU.
2 Select Create/Edit Schedule.
• Touch Guide Me to create a
schedule by answering simple
questions.
• Touch I’ll do it myself to manually
create a program schedule. See
page 10.
• Touch View/Edit to view the full
schedule and make a quick
adjustment.
NOTE: To reduce costs, use the pre-
set Energy Saver settings described
on page 8.
MENU
Create /Edit Schedule

69-2740EFS—01 10
Adjusting program schedules (continued)
3 Select the days to schedule, touch Next.
4 Touch Wake to set your Wake time for
selected day(s).
Next
6:00 am
WAKE

11 69-2740EFS—01
Adjusting program schedules (continued)
5 Touch sor t to set Heat and Cool
temperatures for the Wake period, then
touch Done.
6 Touch other time periods (Leave, Return,
Sleep) to set time and temperatures for
each.
7 Touch Done to save and exit.
NOTE: Touch Delete Period to eliminate
any unwanted time period.
NOTE: Touch Fan Settings to customize
fan settings for any time period.
Done

69-2740EFS—01 12
Overriding schedules: residential use
1 Touch sor t to adjust the
temperature (right side of screen)
and the Hold Until time (left side). The
schedule will resume when the Hold
Until time expires.
2 Touch Switch to Permanent Hold to keep
the same temperature until you change
it or resume the program schedule.
3 Touch Cancel Hold at any time to
resume the program schedule.
Switch To
Permanent Hold

13 69-2740EFS—01
Overriding schedules: commercial use
Touch sor tto adjust the temperature.
It will be maintained until the hold time you
set.
• To change the hold time, touch the
Hold Until arrow buttons. This time
can be adjusted up to the maximum
time set by the installer.
• Touch Override to use a pre-set
occupied temperature if a person
uses the room during an unoccupied
period. The new temperature will be
maintained for 1 hour and can be
adjusted up to the maximum time set
by the installer.
The programmed schedule will resume
when the override timer expires. Touch
Cancel Hold at any time to resume the
program schedule.
OVERRIDE

69-2740EFS—01 14
Viewing equipment status
1 Touch MENU.
2 Select Equipment Status.
3 Touch sor t to view the status of
all the equipment your thermostat
is controlling. Depending on how
your thermostat was installed, the
Equipment Status screen can report
data about the following systems:
• Heating and cooling
• Fan
• Humidification
• Dehumidification
• Ventilation
• Maintenance reminders
• Thermostat information.
MENU
Equipment Status
Done

15 69-2740EFS—01
Setting vacation hold: residential use
This feature helps you save energy while
you are away, and restores comfortable
settings just before you return home.
1 Touch MENU.
2 Select Vacation Mode.
3 Touch sor tto select the date
you leave, then touch Next for further
scheduling details, including times of
day, temperature settings, return date,
and return settings.
4 Review your selections on the last
display, and touch Done to save your
settings. Touch Back, then Cancel to
ignore the changes.
MENU
Next
Done
Vaca�on Mode

69-2740EFS—01 16
Setting holiday/event schedules: commercial use
This feature helps you conserve energy
when the workplace is unoccupied for
special events and holidays.
1 Touch MENU.
2 Select Holiday/Event Scheduler.
3 Select the item you want to schedule.
• Custom Events lets you set up
other days for special schedules.
• US and Canadian Holiday options
let you select from a list of holidays
commonly observed in each
country.
4 Make selections as prompted on each
screen. For more information, see next
two pages.
5 Touch Done to save your settings.
MENU
Holiday /Event Scheduler

17 69-2740EFS—01
Setting custom events: commercial use
This feature lets you customize temperature
settings to be maintained during a specific
event.You can set up an event for a specific
date or day in a month. The thermostat
resumes normal scheduling after the event.
1 Select Custom events from the Holiday/
Event Scheduler menu.
2 Select Create a new event.
3 Select Specific Date or Month/Weekday.
• For Specific Date, you are prompted
to select the start date, settings, end
date, and frequency for the event.
• For Month/Weekday, you are prompted
to select the month, day of the week,
week of the month, settings, length of
event, and frequency of the event.
Create a new event
Next

69-2740EFS—01 18
Setting custom events: commercial use (continued)
4 Review the settings and touch Done to
save them. Touch Back, then Cancel to
ignore the changes.
Done