Honeywell UtilityPRO Series User manual

Operating Manual
UtilityPROTM Series
Touchscreen Programmable Thermostat
69-2539EFS-01

Read and save these instructions.
Need Help?
For assistance or warranty information please call your local Utility at the number found on
the front of the thermostat.
® U.S. Registered Trademark.
US Patent No. 6,574,581; 6,975,958; 7,114,554; 7,346,467; 7,636,604; 7,693,582; 7,788,936; 7,845,576 and other patents pending.
Copyright © 2011 Honeywell International Inc. All rights reserved.
BE CAREFUL! Never use sharp instruments, such as a pencil or pen,
to press touchscreen keys. To prevent damage to the thermostat, always
press keys with your fingertip.
This thermostat contains a Lithium battery which may contain
Perchlorate material.
Perchlorate Material—special handling may apply,
See www.dtsc.ca.gov/hazardouswaste/perchlorate
MCR32584

UtilityPROTM Series
1 69-2539EFS—01
Table of contents
About your new thermostat
Thermostat Features..............................................2
Quick Reference to Controls ..................................4
Quick Reference to Status Display......................... 5
Subscription Services
Demand Control......................................................6
Utility Usages .........................................................7
Utility Messages..................................................... 7
View Message ........................................................8
Usage & Billing.......................................................9
Programming & Operation
Clock Settings ......................................................10
Fan Settings .........................................................11
System Settings ...................................................12
Schedule Settings ................................................13
Program Schedule Override (Temp) ..................... 14
Schedule Override (Permanent) ...........................15
Using program schedules ....................................16
Special Features...................................................18
Screen Lock..........................................................19
Screen Cleaning ...................................................20
Appendicies
Battery Replacement............................................21
Advanced Functions............................................. 22
Troubleshooting.................................................... 27
This thermostat is ready to go!
Your new thermostat is pre-
programmed and ready to go.
See page 16 to check settings.
CAUTION: EQUIPMENT DAMAGE
HAZARD. To prevent possible
compressor damage, do not operate
cooling system when outdoor
temperature is below 50˚F (10˚C).

Operating Manual
69-2539EFS—01 2
UtilityProTM Features
Congratulations! You’ve just purchased the world’s most advanced, easy-to-use
thermostat. It has been designed to give you many years of reliable service and
touchscreen climate control.
Features
• ProvidesUtilityinformationmessages.
• ProvidesUtilitybillinginformation.
• Demandresponsethermostatprogrammedtoaidyouinyoursavings.
• Providesdemandcontrolmessages.
• 7-dayprogramschedulesmaximizecomfortandeconomy.
• One-touchtempcontroloverridesprogramscheduleatanytime.
• Precisecomfortcontrolkeepstemperaturewithin1°Fofthelevelyouset.
• Largetouchscreendisplaywithbacklightiseasytoread—eveninthedark.

UtilityPROTM Series
3 69-2539EFS—01
This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. Just set the time and day.
Then check the settings below and change if needed:
1. Set clock ......................................................................................................................See page 10
2. Select fan setting: Preset to Auto...........................................................................See page 11
3. Select system setting: Preset to Heat..................................................................See page 12
4. Program schedules: Preset to energy-saving levels
while you’re at work or asleep (assumes you
wake at 6 am, leave at 8 am, return at 6 pm
and go to bed at 10 pm).......................................................................................... See pages 16-17
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time,
and manually adjust the temperature (see pages 14-15).

Operating Manual
69-2539EFS—01 4
UtilityProTM FeaturesQuick Reference to Controls
MON TUE WED THU FRI SAT SUN
M32575
DELETE
SUN
PM
USAGE
MESSAGE AREA NEXT
MESSAGE
Press day(s) to set program schedule (see page 13)Press to view messages
Displays the current
tier rate
Press to select fan
operation
Press to select system
type
Press to set program
schedule
Press to adjust
temperature settings
Press to view the
subscribed service
messages
Press to override
program schedule Press to set clock
Press to lock keypad for 30
seconds to clean screen

UtilityPROTM Series
5 69-2539EFS—01
SUN
M32576
USAGE
PM
Recovery
Current inside temperature
Current day of week
Temperature setting
Program schedule ON
(does not display
when off)
Fan setting
Other display messages:
• Cool ON: Cooling system is activated
• Heat ON: Heating system is activated
• Aux Heat ON:Auxiliaryheatingsystemisactivated
Quick Reference to Status Display
System setting
Current time
Adaptive Intelligent
Recovery in effect
(see page 18)

Operating Manual
69-2539EFS—01 6
UtilityProTM FeaturesDemand Control
This is an energy saving device. At times, thermostat operation may be temporarily adjusted by a
small amount as outlined in your energy provider’s associated program literature. This is normal
operation and is part of the program for which you have enrolled.
Thank you for your participation.

UtilityPROTM Series
7 69-2539EFS—01
Getting StartedUtility Usages
Usage is a service provided by the utility provider. Depending on the various
services provided by the utility provider, Usage may contain vital information for
your use. It may display your electricity bill, water consumption bill, gas bill, and so
on. Usage also has a feature wherein you can compare your present consumption
againstyourlastyear’sconsumptionforthesametimeperiod.Forexample,it
displays your current electricity bill along with the previous year’s electricity bill for
the same month.
Usage also displays the rate of electricity at peak times and off peak times. Thus
you can adjust your electricity consumption accordingly.
Messages are also a part of the services provided by the service utility provider.
Messages are sent by the service provider to assist you with additional
information. These messages may contain weather warnings, greetings, reminders,
information about discounts running at a shop, system maintenance messages,
and so on.
Utility Messages

Operating Manual
69-2539EFS—01 8
View Messages
Press on your screen.
The message icon blinks when you
receive a new message.
The Message screen appears.
Use the arrow buttons to view
the messages. There can be a
maximumoffivemessages.The
message scrolls automatically if it
has more than 21 characters.
In case there are no messages, the
message icon does not appear.
Press Delete to delete the displayed
message.
Press Exit to go to the main screen.
M32577
EXIT
NEXT
MESSAGE

UtilityPROTM Series
9 69-2539EFS—01
Usage and Billing
Press on your screen.
The Usage screen appears.
Navigate using the arrow buttons
to view the billing consumption of
water, gas, electricity, and so on*.
In case there are no utility messages,
the utility message icon does not
appear.
Press Exit to go to the main screen.
* subject to Contract Agreement
with the Utility Provider.
MCR32746
USAGE
EXIT
52
61
$$

Operating Manual
69-2539EFS—01 10
To set the current time display, press CLOCK, then press s
or t to adjust the time. Press and hold s or t to advance
the time more quickly.
Press DONEtosave&exit(orpressCANCELtoexitwithout
changing the time).
Note: The real-time clock should never require
adjustment since it automatically updates for daylight
savings time, and stores all date/time information
when auto-change to daylight savings time is enabled
(default).
Note: To change the current weekday display, see page
23.
Note: If the clock button is not visible, the time
displayed is being controlled by the utility. If the time
displayed ever varies from the actual local time by more
than a few minutes, please contact your utility as this
may indicate a communications problem.
Press CLOCK
Adjust time, then press DONE
MCR32747
SCHEDHOLD CLOCK SCREEN MORE
WED
AM
6:01
MCR32748
DONE CANCEL
WED
AM
6:02
Clock Settings

UtilityPROTM Series
11 69-2539EFS—01
Getting StartedUtilityPro®FeaturesFan Settings
Press FAN to select fan operation, then press
DONE.
• ON: Fan is always on.
• Auto: Fan runs only when the heating
or cooling system is ON.
• Circ: Fan runs randomly, about 35%
of the time, not counting any run time
with the heating or cooling system.
You can press FAN to override the fan settings
you’ve programmed for different time periods.
If you select ON or Circ, the setting you select
remains active until you press FAN again to
select Auto.
Press FAN
SUN
MCR32579
USAGE
AM
Note: If a fan schedule is programmed,
“Auto” runs the fan schedule.

Operating Manual
69-2539EFS—01 12
System Settings
SUN
MCR32578
USAGE
AM
Press the SYSTEM button to select one of the
following, then press DONE.
• Heat: Thermostat controls only the
heating system.
• Cool: Thermostat controls only the
cooling system.
• Off: Heating and cooling systems are
OFF.
• Auto: Thermostat automatically
selects heating or cooling depending
on the indoor temperature.
• Em Heat (only for heat pumps with
auxiliaryheat):Thermostatcontrols
EmergencyandAuxiliaryHeat.
Press SYSTEM

UtilityPROTM Series
13 69-2539EFS—01
1. Press SCHED, then EDIT.
2. Press day buttons (MON-SUN) to select day(s).
3. Press s or tto set Wake time for
selected day(s).
4. Press s or tto set Heat and Cool
temperature for this time period.
5. Press other time periods (LEAVE, RETURN, SLEEP)
to set time and temperatures for each.
6. Press DONEtosave&exit(orpressCANCEL to
exitwithoutsavingchanges).
Note: You can press CANCEL PERIOD to eliminate any
unwanted time period.
Note: Press FAN to customize fan settings for any time
period.
Set time for program
period to start
Press EDIT
Select day(s) Set heat/cool levels
MCR32749
SCHED HOLD CLOCKSCREEN USAGE
MCR32750
DONE WAKE LEAVERETURN SLEEPEDIT CANCEL
Press SCHED
MON TUE WED THU FRI SAT SUN
MCR32751
AM
SLEEP
COOL
DONE RETURN
LEAVE
WAKE
OK TO PICK MULTIPLE DAYS
CANCEL
CANCEL
PERIOD
NEXT
MESSAGE
Schedule Settings

Operating Manual
69-2539EFS—01 14
Program Schedule Override (Temporary)
Press s or t to immediately adjust the
temperature. This temporarily overrides the
temperature setting for the current time
period.
The new temperature is maintained only until
thenextprogrammedtimeperiodbegins
(seepage16).Forexample,ifyouwantto
turn up the heat early in the morning, it will
automatically be lowered later, when you
leave for the day.
To cancel the temporary setting at any time, press
CANCEL (or SCHED). The program schedule resumes.
Adjust temperature
Press CANCEL (or SCHED) to
resume program schedule
MCR32581
USAGE
AM
CANCEL
Temporary Hold
HEAT

UtilityPROTM Series
15 69-2539EFS—01
Program Schedule Override (Permanent)
Adjust temperature Press HOLD to permanently adjust the temperature.
This turns off the program schedule.
Whatever temperature you set is maintained 24 hours
a day until you manually change it or press CANCEL
(or SCHED) to cancel Hold and resume the program
schedule.
Press CANCEL (or SCHED) to
resume program schedule
FRI
MCR32582
USAGE
AM
CANCEL
Permanent Hold
HEAT
Press HOLD

Operating Manual
69-2539EFS—01 16
UtilityProTM FeaturesSave Money by Setting Program Schedules
Itiseasytoprogramyoursystemformaximumenergysavings.Youcanprogramfour
time periods each day, with different settings for weekdays and weekends.
Set to the time you awaken and the temperature you want
during the morning, until you leave for the day.
Set to the time you leave home and the temperature you
want while you are away (usually an energy-saving level).
Set to the time you return home and the temperature you
want during the evening, until bedtime.
Set to the time you go to bed and the temperature you want
overnight (usually an energy-saving level).
WAKE
6:00 am
70 °
LEAVE
8:00 am
62 °
RETURN
6:00 pm
70 °
SLEEP
10:00 pm
62 °

UtilityPROTM Series
17 69-2539EFS—01
Getting Started
Werecommendthesesettings,sincetheycanreduceyourheating/coolingexpenses
by as much as 33%.
Wake
(6:00 am)
Leave
(8:00 am)
Return
(6:00 pm)
Sleep
(10:00 pm)
Cool (Mon-Fri)Heat (Mon-Fri) Heat (Sat-Sun) Cool (Sat-Sun)
70 °78 °70 °78 °
62 °85 °62 °85 °
70 °78 °70 °78 °
62 °82 °62 °82 °
Recommended Settings for Maximum Cost Savings

Operating Manual
69-2539EFS—01 18
UtilityProTM FeaturesSpecial Features
Auto Changeover: When set to Auto, the thermostat automatically selects heating
or cooling depending on the indoor temperature.
Adaptive Intelligent Recovery™: This feature allows the thermostat to “learn”
how long the furnace and air conditioner take to reach programmed temperature
settings,sothetemperatureisreachedatthetimeyouset.Forexample:Setthe
Waketimeto6am,andthetemperatureto70°.Theheatcomesonbefore 6 am,
sothetemperatureis70°bythetimeyouwakeat6.Themessage“Recovery”is
displayed when the system is activated before a scheduled time period.
Compressor Protection: This feature forces the compressor to wait a few minutes
before restarting, to prevent equipment damage. During the wait time, the message
“Wait” is displayed on screen.