Hooker Furniture 5805-75200T-85 User manual

1/2
ASSEMBLY INSTRUCTION
Item#: 5805-75200T - 85 - 84in Trestle Table Top w/2-18in Leaves-Natural
5805-75200B - 95 - 84in Trestle Table Base - Gray
5805-75200T- 80 - 84in Trestle Table Top w/2-18in Leaves- Flaky White
5805-75200B -99 - 84in Trestle Table Base - Black
** Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two or more people.
Assembly steps:
1.Place table top upside down on a soft surface to prevent it from being scratched. Attach
side frames ( F & H ) to table top (L) using bolts(C), lock washers (B), flat washers (A), by
turning with allen wrench (D) in a clockwise direction (see diagram 1).Do not tighten up at this
step.
Diagram 1
Diagram 1
Diagram 2

2/2
2.Attach the ends of stretcher (G) to side frames ( F & H ) to make sure all pre-drilled holes
are in alignment, well insert bolts (E), lock washers (B) and flat washers (A), tighten all
bolts by turning with allen wrench (D) in clockwise direction (See Diagram 2).
3. Tighten all bolts.
4.Turn table upright.
Instruction for table leaves:
1. There are latches at the bottom of table top, turn off the latches as shown in Diagram 3.
2. Pull out table top as the arrow direction shown in Diagram 4.
3. Place table leaves between and push table tops together.
4. Turn on latches. (see Diagram 3)
5. Take opposite actions to remove table leaves.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 2
Diagram 3
Diagram4