Hooker Furniture 5820-75202-84 User manual

1/2
ASSEMBLY INSTRUCTION
Item# 5820-75202-84 Foyer Accent / Dining Table
** Please make sure you have all parts indicated below prior to assembly.
This table is heavy and can best be assembled with the help of two or more people.
Note:
1. Height of this table can be adjusted with or without extension blocks. ( 42” pub height ,and 36”
counter height, 30”dining height).
42” pub height 36”counter height 30”dining height
Assembly steps -- 42" pub height:
Diagram 1
1. Place table top (A) upside down on a soft surface to prevent it from being scratched.
Put whole base(B) onto top to make sure pre-drilled holes are in alignment, and turn
the base in clockwise direction tightly(See Diagram 1).
2. Turn table upright.

2/2
Assembly steps --36" dining height:
Diagram 2 Diagram 3
1. Unscrew and remove one of the extension blocks (Small dia. of block (S) or Large dia. of
block (L) ) from the base (B) in a counter-clockwise direction (See Diagram 2).
2. Place table top (A) upside down on a soft surface to prevent it from being scratched.
Put whole base(B) onto top to make sure pre-drilled holes are in alignment, and turn
the base in clockwise direction tightly (See Diagram 3).
3. Turn table upright.
Assembly steps --30" counter height:
Diagram 4 Diagram5
1. Unscrew and remove the small dia. of block (S) and large dia. of block (L) from the base (B) in
a counter-clockwise direction (See Diagram 4).
2. Place table top (A) upside down on a soft surface to prevent it from being scratched.
Put whole base(B) onto top to make sure pre-drilled holes are in alignment, and turn
the base in clockwise direction tightly (See Diagram 5).
3. Turn table upright.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.