Hooker Furniture 500-50-828 User manual

1/2
2
ASSEMBLY INSTRUCTION
Item#: 500-50-828 Round Accent Table
*** Please make sure you have all parts indicated below prior to assembly.
NO
D
A
C
B
HARDWARE LIST Q'TY
GWood Dowel
1
1
8
8
5
3
3
3
Full Threaded Bolt
Wrench
Nut
Allen Wrench
Bolt
Lock Washer
Flat Washer
F
E
H
D
ABC
J
K
ABC
D
B
G
H
AEF
Assembly steps:
1.Attach the mounting bridge (J) to the post (K) with 2 flat washers (A), 2 lock washers (B) and
2 bolts (C). Tighten all bolts securely with allen wrench (D) (See diagram 1).
2.Insert 3 full threaded bolts (G),3 wood dowels(H) to legs, assemble legs to post by using 3 flat
washers (A), 3 lock washers (B), 3 nuts(E) and turn with wrench (F) in a clockwise direction
(see digram2).
Diagram 1
Diagram 2
Diagram 3

2/2
2
3.Place table top upside down on a soft surface to prevent from scratching.
4.Align the holes on the top with the one on the mounting bridge, attach with 3 flat washers (A),
3 lock washers (B) and 3 bolts (C). Tighten all bolts securely with allen wrench (D) (See
diagram3).
Caution: Do not over tighten.
Cleaning Instruction: Clean finished parts with a mild dishwashing liquid and water solution on a
damp cloth. polish the finish with soft cloth and an industry recognized furniture polish.