Hooker Furniture 5865-75906-02 User manual

1/2
ASSEMBLY INSTRUCTION
(for connecting the wire of the light on this cabinet)
Item#:5865-75906-02 Display Cabinet Blanc
5845-75906-99 Display Cabinet Noir
*** Caution: Please read all instructions carefully before starting the assembly process.
Please note this cabinet can be used alone with puck light on by a touch dimmer. Also, when
two or more are bunched together, you can control all puck lights by touching one dimmer.
Assembly Steps
Diagram 1 Diagram 2

2/2
1. When each piece of cabinet is used alone, attach male connector of the power switch (A) to a
wall plug. (See Diagram 1)
2. Touch dimmer is at the inside of right post.
3. If you want to bunch two or more cabinets together, place them all side by side in a desired
location.
4. Leave male connector of the puck light (C) and female connector of power switch (B) for the first
cabinet (#1) as it is. Keep male connector of the puck light (C) and female connector of power
switch (B) off for the rest cabinets (#2, #3, and so on). (See Diagram 2)
5. Connect female connector of the puck light (D) (#1 cabinet) with male connector of power wire (E),
then have female connector of power wire (F) connected to male connector of the puck light (C)
(the #2 cabinet). (See Diagram 3)
6. Repeat step 5 for the 3rd cabinet and the rest of ones when more than two are bunched together
till each one is connected.
7. Plug in male connector of power switch (A) (#1 cabinet).
8. Touch the dimmer of the #1 cabinet, all puck lights connecting together will be on at the same time.
Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water solution.
Polish the finish with soft cloth and an industry recognized furniture polish.
Diagram 3