Hootoo HT-TM01 TripMate User manual

User Guide
HT-TM01 TripMate
V 1.0
HooToo®

2
Contents
Chapter 1 Introduction ....................................................................................................................................... 4
1.1 Preview................................................................................................................................................. 4
1.2 Features................................................................................................................................................ 4
1.2.1 Personal Cloud.............................................................................................................................. 4
1.2.2 Travel Router ................................................................................................................................ 4
1.2.3 External Battery Pack.................................................................................................................... 4
1.3 Diagram ................................................................................................................................................ 4
Chapter 2 Configure the TripMate ..................................................................................................................... 6
2.1 Connect the TripMate .......................................................................................................................... 6
2.1.1 Connect the TripMate wirelessly.................................................................................................. 6
2.1.2 Access the Configuration Page ..................................................................................................... 8
2.2 Personal Cloud ..................................................................................................................................... 9
2.3 Travel Router...................................................................................................................................... 12
2.3.1 Access Point Mode ..................................................................................................................... 12
2.3.2 Router Mode............................................................................................................................... 13
2.3.3 Bridge Mode ............................................................................................................................... 18
Chapter 3 System Tools .................................................................................................................................... 23
3.1 User Setting........................................................................................................................................ 23
3.2 Disk Information................................................................................................................................. 24
3.3 Network Setting ................................................................................................................................. 25
3.3.1 Host Name .................................................................................................................................. 25
3.3.2 SSID Setting................................................................................................................................. 27
3.3.3 Hide SSID..................................................................................................................................... 29
3.3.4 DHCP Settings ............................................................................................................................. 30
3.4 Service Setting.................................................................................................................................... 30
3.4.1 Samba Service............................................................................................................................. 31
3.4.2 DLNA Service............................................................................................................................... 31
3.5 System Settings .................................................................................................................................. 35
3.5.1 Backup & Restore ....................................................................................................................... 35

3
3.5.2 Firmware..................................................................................................................................... 37
3.5.3 Factory Default ........................................................................................................................... 41
3.6 Wizard ................................................................................................................................................ 42
3.7 Explorer .............................................................................................................................................. 43
Chapter 4 Battery Backup................................................................................................................................. 44
4.1 Charge TripMate ................................................................................................................................ 44
4.2 Charge Devices ................................................................................................................................... 44
Chapter 5 Warranty and Support..................................................................................................................... 45
Appendix A: Specification................................................................................................................................. 46

4
Chapter 1 Introduction
1.1 Preview
TripMate is a versatile device that creates a personal hotspot for sharing your existing USB storage
device, a travel router that provides wireless access to a wired connection and an external battery
pack charger to charge your devices on the go.
1.2 Features
1.2.1 Personal Cloud
Create your own wireless network to transfer and share media with Wi-Fi enabled devices. Stream
your videos and songs from the USB storage and share with friends.
1.2.2 Travel Router
Turn an existing network into a handy, secure, local hotspot which can be shared by multiple
devices.
1.2.3 External Battery Pack
Give your phone, tablet or camera a quick charge while you are on the go.
1.3 Diagram
Power Button:
Short Press (1 second): Activates battery LED indicators
Long Press (3 seconds): Activates Internet/LAN
Wi-Fi LED:
Flashing Green: System loading
Solid Green: System loaded

5
Flashing Blue: Connecting to the Internet
Solid Blue: Internet connected
RJ45 Ethernet Port:
Connect to your existing router/modem to set TripMate as AP/Bridge/Router
USB Port:
To connect to your USB storage and to charge your devices
Micro USB Port:
Charge your TripMate
Reset Button:
Press with a small pin for 10 seconds to reset your TripMate

6
Chapter 2 Configure the TripMate
2.1 Connect the TripMate
2.1.1 Connect the TripMate wirelessly
The TripMate can create a limited local wireless network (no full internet access), where the central
functions are performed through the local network. To connect the TripMate wirelessly, please
follow the steps below:
Example: Android
1. Press the power button for 3 seconds to power on the device. Wait for the Wi-Fi indicator to be
ready
2. Click Settings on the phone

7
3. Click WLAN
4. Open Wi-Fi, select TripMate-XXXX

8
5. Enter the default password: 11111111 (8 x 1’s), click Connect
▲Note: The same process applies for iPhone and other Smartphones when connecting the
TripMate to local WiFi.
2.1.2 Access the Configuration Page
1. Connect phone to TripMate
2. When it shows the status “Connected”, open browser, enter 10.10.10.254 in the url box

9
3. Log in with default user name: admin, password: (leave it empty)
2.2 Personal Cloud
You can create your own wireless personal media sharing cloud.
▲Note: Download the "HooToo TripMate" app from App Store or Google Play first

10
Example: Android
1. Insert a USB thumb drive, a card reader (up to 64GB), or a USB HHD (supported format:
NTFS/FAT16/FAT32, up to 4TB) into the USB port of the TripMate, then power up the TripMate.
2. Download the app HooToo TripMate from Google Play to your Android phone
3. Connect phone to the TripMate wirelessly
4. Run the HooToo TripMate app

11
5. Tap on My TripMate. All of the contents can be found under the main folder "USBDisk1_Volume1”
6. Tap on My Device. All of the contents on the phone can be read.
▲Note: If you need specific instructions for the HooToo TripMate app, please refer to the
instructions listed on the HooToo website www.hootoo.com

12
2.3 Travel Router
▲Note: Similar settings can also be performed on any Mac computer, or mobile devices such as
phone, tablet, etc.
2.3.1 Access Point Mode
Definition: TripMate is connected to a wired network and transforms the wired connection into a
wireless one so that multiple devices can share the Internet.
Application:
1. Office, home, hotel or places where only a wired network is available.
2. LAN gaming party, small meeting with file sharing and other situations where a temporary
network is needed.
Configuration:
Example: Android
▲Note: TripMate will automatically become an access point once:
1. Power on the TripMate;
2. Plug a network cable from a well-established router to TripMate, wait for the blue Wi-Fi
indicator light to stop flashing and remain steady;
3. Connect phone to the TripMate wirelessly;
4. TripMate is now connected to the internet (e.g. www.yahoo.com).
▲Note: No need to change any parameters once it becomes an Access Point.

13
2.3.2 Router Mode
TripMate connects to a DSL or cable modem and turns it into a regular wireless router.
Configuration:
1. Power on TripMate
2. Plug an Ethernet cable from a well-established modem to TripMate
3. Connect phone to TripMate wirelessly
4. Login 10.10.10.254
5. Click Network

14
6. Select Internet, choose Wired Access.
▲Note: TripMate provides Dynamic IP, Static IP and PPPoE for router setup. Please consult with the
network administrator or refer to the wired network user documentation for best selection.
If using a DSL Internet, please enter the PPPoE username and password. Click Save

15
Example:
TripMate is now connected to the internet
If a static IP address is issued by the network provider (please request network provider), the given
static IP fields (including network mask and gateway) must also be set to the router. Click Save

16
TripMate is now connected to the internet
▲Tips:
When connecting devices with network cables, please make sure the cable is connected securely.
Loose cables are one of the most common sources of network setup problems.
If a wired network type cannot be chosen, an alternative method is available to set up the router
mode
1. Connect the computer directly to the wired connection with an Ethernet cable
2. Press win+R on the keyboard (the "win" key is located between the Ctrl and Alt buttons)
3. Enter CMD, a black window pops up; enter ipconfig. Get the IP address, subnet mask and
default gateway assigned by the router/modem.

17
4. Connect TripMate to the wired connection with an Ethernet cable
5. Login 10.10.10.254
6. Click Network
7. Select Internet , then choose Wired Access then Static IP from the drop-down list
8. Enter into the IP field the same IP information assigned by the wired network. Click Save

18
TripMate is now connected to the internet
2.3.3 Bridge Mode
Definition: The router borrows an existing wireless Internet and broadcasts it using a different
network name (SSID) and password. This application can create two individual networks for two
groups of users sharing one Internet connection.
Application: Small restaurants, shops, bar, home, office or others where Internet service needs to
be provided for guests without revealing the password of the existing network for hosts.

19
Configuration:
There are two configuration modes:
1. Wi-Fi is secured, which requires entering password,
2. Wi-Fi is open, but has an authorization page.
Configuration #1:
Example: Android
1. Power on TripMate
2. Connect your phone to TripMate wirelessly
3. Open browser and log in 10.10.10.254
4. Network → Internet, choose Wireless Access
5. Click Scan to search available Wi-Fi

20
6. Select OpenWifi, enter the corresponding password. Click Save
TripMate is now connected to the internet
Configuration #2:
1. Get the user name and password of the Wi-Fi, which is needed to click through the
login/authentication page
2. Connect phone to TripMate wirelessly > Open browser and log in 10.10.10.254