Hoover Twist & Vac Hand-held Vacuum Cleaner User manual

c j
Twist & Vat’”
with swivel nozzle
Cleaner
Review this manual before
operating cleaner

-- -
- .
- -v-v
This cleaner was inspected and packaged carefully before being
shipped from the factroy. If you should happen to need assistance
during assembly or operation call
l-800-944-9200 for an automated referral of authorized service
outlet locations (U.S. only) or
l-330-499-9499 to speak with a representative in our Consumer
Response Center.
DO NOT RETURNTHIS PRODUCTTOTHE
STORE
Fill in and retain
The HOOVER vacuum cleaner you have just purchased is a
lightweight hand-held cleaner. It is designed for quick cleanups on
carpet, rugs or upholstery.
The model and serial number are located on the bottom of the cleaner.
For your personal records, please enter the COMPLETE model and
serial number in the spaces provided and retain this information.
Your cleaner is model
and has serial number
It is suggested that you attach your sales receipt to this owner’s
manual. Verification of date of purchase may be required for warranty
service of your Hoover product.
Save!
Index
Cleaner
Descriptions . . . . . . . . . . . . . . . . . . . . . . . . .
3
How to Use .I..................-................. 4-5
If You
Have a Problem
. . . . . . . . . . . . . . . . . . . . .
12
Important Safeguards
. . . . . . . . . . . . . . . . . . . . . . .
2
Lubrication
. . . . . . . . . . ..*..........................
12
Maintenance
Agitator Belt
............ ..I...................
!O
Agitator Brush
. . . . . . . . . . . . . . . . . . . . . . . . .
10-l 1
Clearing Obstructions
. . . . . . . . . . . . . . . . . . .
7
Dirt Cup
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-7
Reusable Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7
0
VL
1
0 1995 The Hoover Company

I
Important Safeguards!
When using an electrical appliance, always follow
basic precautions, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
n To reduce the risk of fire, electric shock
Warning. or injury:
Do not use outdoors or on wet surfaces.
Close supervision is necessary when any appliance is used by or
near children. Do not allow vacuum cleaner to be used as a toy or to
run unattended at any time.
Keep hair, loose clothing, fingers, feet and all parts of body away
from openings, rotating agitator and other moving parts.
Do not pick up anything that is burning or smoking, such as ciga-
rettes, matches, or hot ashes.
Do not use to pick up flammable or combustible liquids such as
gasoline or use in areas where they may be present.
Avoid picking up hard, sharp objects with the cleaner. They may
damage the cleaner and the bag.
Do not use without dirt cup in place. When picking up very
fine materials such as powder, empty dirt cup often.
Use extra care when cleaning on stairs.
Do not
blocke
CY
ut any object into openings. Do not use with any opening
; keep free of dust, hnt, hair, or anything that may reduce
air flow.
Do not pull or carry by cord, use cord as a handle, close door on
cord or pull cord around sharp edges or corners. Do not run appli-
ance over cord. Keep cord away from heated surfaces.
Always disconnect cord from electrical outlet before servicing the
cleaner.
Unplug cleaner when not in use. Turn off all controls before unplug-
ging.
Do not unplug by
cord. Never hand e plug or appliance with wet hands. P
ulling on cord. To unplug, grasp the plug, not the
The use of an extension cord is not recommended.
Do not use with damaged cord or plug. If appliance is not working as
it should, has been dro ped, damaged, left outdoors, or dro ped
into water, take it to a l-r oover Factory Service Center or Aut
t:
orized
Hoover Warranty Service Dealer (Depot).
Use vacuum cleaner only for its intended use as described in the
instructions. Use only attachments recommended by The Hoover
Company; others may cause hazards.
Save these instructions!
2

0
Unpacking
Unpack the cleaner from the
carton and identify the parts
shown. Remove and dispose of
cardboard packing.
1.
Bottom plate
2.
Multi-purpose nozzle
3.
Front cover
4.On/Off switch
5.
Handle
6.
Dirt Cup
7. Dirt cup latch button
8.
Nozzle latch
This cleaner is intended for
household use.
Operate cleaner only at voltage specified on data plate on bottom of
cleaner.
3

Questions or Concerns?
The Hoover Company wants to quickly resolve any concerns about your
cleaner or questions regarding its use. Look on the list provided with the
product for youre local Hoover Factory Service Center or in the Yellow
Pages under “Vacuum Cleaners - Household” for the nearest Authorized
Hoover Warranty Service Dealer (depot) or call:
l-800-944-9200 for an automated referral of authorized service
outlet locations (U.S. only)
OR
l-330-499-9499 to speak with a representative in the Hoover
Consumer Response Center.
DO NOT RETURN THIS PRODUCTTOTHE STORE OR SEND ITT0
NORTH CANTON FOR SERVICE.
How to use
On/Off switch
To reduce of risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other).
This plug will fit in a polarized outlet
only one way. If the plug does not
fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician to install the
proper outlet. Do not change the
plug in any way.
Plug cord into electrical outlet.
Slide On/Off switch back to turn
cleaner off.
Multi-purpose nozzle
The multi-purpose nozzle has been
built into the front of the cleaner. It
is designed for use on carpet, rugs,
upholstered furniture, mattresses,
automobile interiors and carpeted
stairs.
The nozzle has a rotating agitator
which should be kept away from
hair, hands, feet and loose
clothing. Keep cleaner away
from children.
4

How to rotate
nozzle
CAUTION: MOVING PARTS.
TURN CLEANER OFF BEFORE
ROTATING NOZZLE.
To rotate nozzle either vertically or
horizontally, place thumb on latch
with finger on front of nozzle.
Press latch toward edge of nozzle
and rotate.
Brushed edge cleaning
Brushed edge cleaning is
provided on both sides of the
nozzle to remove dust and lint
along edges of baseboards and
furniture. Guide either side of the
nozzle along edge as shown.
Maintenance
Familiarize yourself with the home maintenance tasks presented in the
following sections. Keep this owner’s manual in a convenient place where
you can refer to it when needed. Proper use and care of your cleaner will
ensure continued cleaning effectiveness.
The dirt cup
The debris picked up by the
cleaner is deposited into the dirt
cup. Empty after each use.
Before reattaching, the cup may
be cleaned with a damp cloth or
rinsed with water if necessary.
Dry the cup thoroughly before
reusing.
How to empty
Disconnect cleaner from electri-
cal outlet.
1. Hold cleaner in a vertical
position as shown.
5

2. Grasp dirt cup section; depress
dirt cup latch.
4. With dirt cup section in hand,
grasp extension on filter frame
and lift out.
6. Pull middle section of filter out
of filter frame.
\
I
3. Slide dirt cup off handle
section.
5. Empty dirt cup.
7. Brush surface of filter to remove
any clinging litter.
Push filter back into frame.
6

I
\
I\
I
8. Replace filter, matching 9. Slide dirt cup completely onto
rounded flap with rounded side of handle making sure latch is secure.
dirt cup (opposite side that slides
onto handle).
Clearing obstructions
Removing larger items from carpet and other surfaces before vacuuming
will help prevent obstructions in the nozzle or dirt passageway, and
maintain the cleaning effectiveness of your cleaner.
To check for obstructions, first
turn cleaner Off and disconnect
cord from electrical outlet.
Remove dirt cup; remove any
obstruction from dirt passageway.
The bottom plate may be removed
it there is an obstruction in the
nozzle. See “The Belt” section.
Reusable filter
How to clean
Disconnect cleaner from
electrical outlet.
The filter protects the motor from
dirt particles. Brush dirt from filter
when emptying dirt cup. If a
significant reduction in pick up is
observed, the filter may be
washed in warm water. Filter must
be completely dry before replac-
ing it in cleaner. Do not use
cleaner without filter in place.
Avoid picking up oily debris that
may damage filter.
7

The belt
The belt in your cleaner drives the agitator. It has been designed specifi-
cally for use in this cleaner and is important for effective operation.
Where to buy
The belt may be purchased from your local Authorized Hoover Dealer or
from a Hoover Factory Service Center.
Ask for Hoover part No. 59139191
How to replace
Disconnect cleaner from electri-
cal outlet.
The belt is located behind the front
cover of your cleaner and should
be checked from time to time.
Replace the belt if it is stretched or
broken.
FRONT
1. To check belt, rotate nozzle to
vertical position.
Lift off front cover.
2. Remove the two bottom plate
screws.

3. Pivot off bottom plate making
sure to unhook center tab on
inside edge of nozzle (opposite
edge with screws).
4. If belt is stretched, remove it
from the motor pulley.
Remove agitator and belt from
nozzle.
5. Put new belt on agitator.
Position agitator in nozzle orient-
ing agitator end caps with slots on
both sides of nozzle. End cap
with side projections fits into slot
opposite the end with nozzle
latch.
The agitator end caps may fall off
during belt replacement. For
correct orientation of end caps
onto agitator, see “How to replace
Agitator Brush.”
The belt should line up with tab on
inside of nozzle.
9

6. Attach belt to motor pulley.
Replace bottom plate by first
hooking it to center tab on inside
of nozzle.
7. Reposition screws and front
cover.
8. Make sure “bridge” across
bottom plate opening covers belt.
If belt is not covered, agitator is
not correctly oriented in nozzle.
Agitator brush
Disconnect cleaner from electri-
cal outlet.
To check condition of agitator
brushes, move the edge of a card
across agitator opening. Rotate
agitator by hand. If brushes do
not touch edge of card, replace
the agitator.
Where to buy
The agitator may be purchased
from your local Authorized Hoover
Dealer or from a Hoover Factory
Service Center.
Ask for HOOVER agitator complete
with end caps, part No. 59139205
10

How to replace
Disconnect cleaner from electri-
cal outlet.
1. Remove bottom plate, agitator
and belt following directions for
“How to replace belt.”
2. Discard old agitator and end caps.
3. If the end caps should fall off the agitator, they are different from each
other and need to be properly oriented as shown below. End caps should
fit tightly on agitator.
END CAP WITHOUT
SIDE PROJECTIONS
FIBER WASHER
I
FIBER WASHER
0
0
“IIV,.,., VII
BELT
4. Position agitator in nozzle and
replace bottom plate, screws and
front cover following directions for
“How to replace belt.”
11

If you have a problem
This appliance was inspected thoroughly and was in good operating
condition when it was shipped from the factory. If a minor problem
develops, it usually can be solved quite easily when the cause is identi-
fied. Therefore, this check list is provided for your convenience.
Problem: Cleaner won’t run.
Possible Cause Possible Solution:
1. Not firmly plugged in. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Plug unit in firmly.
2. No voltage in wall plug. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Check fuse or breaker.
3. Blown fuse or tripped breaker. . . . . . . . . . . . . . . . . . Replace fuse/reset breaker.
Problem: Cleaner won’t pick up.
Possible Cause Possible Solution:
1. Dirt cup full.
..............................................
Empty dirt cup.
2. Nozzle, dirt passageway clogged.
.......... Remove obstruction.
3. Filter clogged.
.......................................... Empty dirt cup and clean filter.
4. Agitator brushes worn.
.............................
Replace agitator.
5. Broken or worn belt.
.................................
Replace belt.
Problem: Dirt falling from cleaner.
Possible Cause Possible Solution:
1. Flap on filter clogged or damaged. . . . . . . . . . Remove obstruction; replace
filter if necessary.
Lubrication
The motor and agitator bearings are permanently lubricated. The addition
of lubricant could cause damage. Therefore, do not lubricate the cleaner.
12

Service
To obtain approved HOOVER service and genuine HOOVER parts, locate
the nearest Hoover Factory Service Center or Authorized Hoover
Warranty Service dealer (depot) by:
l checking the Yellow Pages under “Vacuum Cleaners -
Household” OR-
* Checking the list of Factory Service Centers provided with this
cleaner OR-
. calling I-800-944-9200 for an automated referral of authorized
service outlet locations (U.S. only).
Do not send your cleaner to the Hoover Company in North Canton for
service, this will only result in a delay.
If further assistance is needed, contact The Hoover Company Consumer
Response Center, North Canton, Ohio 44720, Phone: [phone].
In Canada, contact Hoover Canada, Burlington, Ontario L7R 4A8,
Phone: I-800-263-6376.
Always identify your cleaner by the complete model number when
requesting information or ordering parts. (The model number appears on
the bottom of the cleaner.)
13

HOOVER and @ are registered trademarks of
0
P
THE HOOVER COMPANY, NORTH CANTON, OHIO 44720
RI 3-96 S1147 Printed in China 59139-180