Hoover WINDTUNNEL TANGLE GUARD UH77110 User manual

WINDTUNNEL™
TANGLE GUARD™
UPRIGHT VACUUM
3
Insert the lower end of the hose into the
hose port. Then insert the upper end into
the handle port.
GETTING STARTED
Insert the handle into the
wand. You will hear a click
when inserted properly.
1
Insert the wand firmly
into the unit.
2
Fully assemble product prior to use.
Plug in, then push the
Power Button on the
shoulder to power
ON/OFF.
1
QUICK START GUIDE
USING YOUR PRODUCT
2
Hold for 3 seconds to
turn brushroll off.
3
For above floor
cleaning, release handle
for up close cleaning.
4
For above floor
cleaning, release wand
for hard-to-reach
cleaning.

961003626-R1
Turbo Tool
Remove pet hair and dirt from
upholstery, stairs, and more.
2-in-1 Dusting Brush &
Upholstery Tool OR Dusting
Brush
Remove pet hair, dust, and dirt
on upholstery, stairs,
baseboards, and more.
LED Crevice Tool OR
Crevice Tool
Clean crevices and hard to reach
areas. Attach at the end of the
wand or handle to clean up high
or down low.
TOOLS FOR EVERY MESS*
2
Rinse the filter with water until
the water runs through clear.
Remove the dirt cup, then
remove the filter from the dirt
cup lid using the tab.
1
CLEANING THE FILTER
3
IMPORTANT: Allow the filter to air
dry for 24-48 hours.
*Not all tools included on each model.
24-48
HRS