Hopeland HL7206C12 User manual

User Manual of
HL7206C12/24 RFID Reader
Shenzhen Hopeland Technologies Co., Ltd

Welcome to be user of Hopeland RFID products. Thanks for choosing Hopeland’s
12/24-port Fixed RFID Reader HL7206C12/24. We believe our device will bring convenience
for your work.

Catalogue
Catalogue.................................................................................................................................................................3
1. Technical Specification....................................................................................................................................... 6
1.1 Feature............................................................................................................................................................ 6
1.2 Technical.........................................................................................................................................................6
1.2.1 Main function..........................................................................................................................................6
1.2.2 Technical parameter..............................................................................................................................6
1.2.3 Operational environment.................................................................................................................... 7
FCC warning：..................................................................................................................................................7
2. Sketch map..........................................................................................................................................................8
2.1 Physical construction................................................................................................................................... 8
2.2 Weight........................................................................................................................................................... 9
2.3 Illustration of LED display........................................................................................................................... 9
2.4 Interfaces.....................................................................................................................................................11
2.4.1 Power supply, communication and I/O interface.......................................................................... 11
2.4.2 I/O Interface definition...................................................................................................................... 11
2.4.3 Coaxial RF Feeder Cable (optional).................................................................................................13
2.4.4 Network connection diagram.......................................................................................................... 13
3. Installation..........................................................................................................................................................14
3.1 Notes............................................................................................................................................................ 14
3.2 Installation conditions............................................................................................................................... 14
3.3 Device connection..................................................................................................................................... 14
3.3.1 Power on...............................................................................................................................................14
3.3.2 Antenna connection...........................................................................................................................14
3.3.3 PC connection.....................................................................................................................................15

3.4 Device installation...................................................................................................................................... 15
3.5 Acceptance................................................................................................................................................. 15
3.5.1 Acceptance of structure..................................................................................................................... 15
3.5.2 Performance acceptance.................................................................................................................. 15
4. Common failures.............................................................................................................................................. 16
4.1 Daily maintenance......................................................................................................................................16
4.2 Common failure analysis and solution................................................................................................... 16
5. Package.............................................................................................................................................................. 17
5.1 Package........................................................................................................................................................ 17
5.2 Accessories..................................................................................................................................................17
5.3 Storage environment................................................................................................................................ 18
6. After-sale service..............................................................................................................................................19

6
1. Technical Specification
1.1 Feature
HL7206C12/24 is a high performance 12/24 antenna port fixed UHF RFID reader; support
ISO18000-6C/6B protocols. The work frequency includes China standard dual frequency 920MHz ~
925MHz and 840MHz～845MHz, FCC 902MHz ~ 928MHz and ETSI 865MHz ~ 868MHz.
Output power from 0 ~ 33dBm optional, with long identification distance, fast reading speed,
high accurate rate, strong anti-interference ability, good protection performance and easy installation.
1.2 Technical
1.2.1 Main function
Air interface protocol: support ISO18000-6C/6B standard
Built-in LINUX operating system
Multiple communication port (Ethernet, RS232, RS485, USB), Wi-Fi extensible
Support tag data filtering
Support RSSI: the intensity of the perceived signal
Adjustable RF output power
Optional working mode: constant frequency / frequency hopping
Support antenna detection function
Support online and remote upgrade
I/O interface: 4 port optocoupler input, 4 port relay output and Wiegand output
1.2.2 Technical parameter
Working frequency: GB 920MHz～925MHz, GB 840MHz～845MHz,
FCC 902MHz～928MHz, ETSI 865MHz～868MHz
Output power (port): 33dBm ± 1dB (MAX)
Power adjustment: 1 dB step-by-step
Reading distance: 0 ~8meters (depending on tags, antennas and environment)
Channel bandwidth: <200 KHz
RS232 serial communication rate: 115200bps (default), 19200 bps, 9600bps
RS485 interface communication rate: 115200bps (default), 19200 bps, 9600bps

7
Support: Wiegand 26, 34, 66
Power supply: 10V ~ 30V(power capacity is not less than 60W)
Power adapter: AC input 100V ~ 240V, 50Hz ~ 60Hz
DC output: 24V/2.5A
1.2.3 Operational environment
Working environment: -20℃～+70℃
Relative Humidity: 5%RH～90%RH（+25℃）
FCC warning：
This device complies with Part 15 of the FCC Rules. Operation is subject to the following three
conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired
operation.
The distance between user and products should be no less than 20cm
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. such modifications could void the user ’s authority to operate this
equipment
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.

8
2. Sketch map
2.1 Physical construction
Image 2-1 Structure diagram of HL7206C12
Image 2-2 Structure diagram of HL7206C24
Size: 260mm*134mm*44mm

9
2.2 Weight
1.41kg
2.3 Illustration of LED display
Image2-3 Sketch map of C12’s LED indicator
Image2-4 Sketch map of C24’s LED indicator
HL7206C12 LED indicator panel describe as below Form 2-1:
Form 2-1 HL7206C12 LED indicator description
LED Mark NO.
Mark NO.
Status description
POWER
Power indicator
Keep bright indicates power supply working normally
ST
Status indicator
Keep bright indicates tag be read
ANT1
Antenna 1 indicator
Indicates antenna 1 is working
ANT2
Antenna 2 indicator
Indicates antenna 2 is working
ANT3
Antenna 3 indicator
Indicates antenna 3 is working
ANT4
Antenna 4 indicator
Indicates antenna 4 is working
ANT5
Antenna 5 indicator
Indicates antenna 5 is working
ANT6
Antenna 6 indicator
Indicates antenna 6 is working
ANT7
Antenna 7 indicator
Indicates antenna 7 is working
ANT8
Antenna 8 indicator
Indicates antenna 8 is working
ANT9
Antenna 9 indicator
Indicates antenna 9 is working
ANT10
Antenna 10 indicator
Indicates antenna 10 is working
ANT11
Antenna 11 indicator
Indicates antenna 11 is working
ANT12
Antenna 12 indicator
Indicates antenna 12 is working

10
HL7206C24 LED indicator panel describe as below Form 2-2:
Form 2-2 HL7206C24 LED indicator description
LED Mark NO.
Mark NO.
Status description
POWER
Power indicator
Keep bright indicates power supply working normally
ST
Status indicator
Keep bright indicates tag be read
ANT1/2
Antenna 1/2 indicator
bi-colour light, red Indicates antenna 1 is working,
green indicates antenna 2 is working
ANT3/4
Antenna 3/4 indicator
bi-colour light, red Indicates antenna 3 is working,
green indicates antenna4 is working
ANT5/6
Antenna 5/6 indicator
bi-colour light, red Indicates antenna 5 is working,
green indicates antenna 6 is working
ANT7/8
Antenna 7/8 indicator
bi-colour light, red Indicates antenna 7 is working,
green indicates antenna 8 is working
ANT9/10
Antenna 9/10 indicator
bi-colour light, red Indicates antenna 9 is working,
green indicates antenna 10 is working
ANT11/12
Antenna 11/12 indicator
bi-colour light, red Indicates antenna 11 is working,
green indicates antenna 12 is working
ANT13/14
Antenna 13/14 indicator
bi-colour light, red Indicates antenna 13 is working,
green indicates antenna 14 is working
ANT15/16
Antenna 15/16 indicator
bi-colour light, red Indicates antenna 15 is working,
green indicates antenna 16 is working
ANT17/18
Antenna 17/18 indicator
bi-colour light, red Indicates antenna 17 is working,
green indicates antenna 18 is working
ANT19/20
Antenna 19/20 indicator
bi-colour light, red Indicates antenna 19 is working,
green indicates antenna 20 is working
ANT21/22
Antenna 21/22 indicator
bi-colour light, red Indicates antenna 21 is working,
green indicates antenna 22 is working
ANT23/24
Antenna 23/24 indicator
bi-colour light, red Indicates antenna 23 is working,
green indicates antenna 24 is working

11
2.4 Interfaces
2.4.1 Power supply, communication and I/O interface
Image 2-5 Sketch map of reader’s power supply, communication and I/O interface
Details are shown in form 2-3
Form 2-3 Reader’s power supply, communication and I/O interface
Interface ID
Interface Name
Detail description
POWER
Power supply
DC, 10~30V, power capacity no less than 60W.
RJ45
Ethernet interface
10/100M Ethernet interface, the reader communication interface.
USB DEVICE
USB device port
Connecting PC or other upper computer, communication interface.
USB HOST
USB host port
For external U disk, wireless LAN card and other expansion devices.
RS-232
RS-232 serial port
Serial port, the reader control and communication interface.
Other
I/O interface
See detailed definition 2.4.2.
2.4.2 I/O Interface definition
Image 2-6 Sketch map of I/O control interface