Hopetech Electronics Technology HP8000 Series User manual

1
User’s Manual
HP8000 series
PROGRAMMABLE DC ELECTRONIC LOAD
Hopetech Electronics Technology 2020-11-10 Manual Edition V.2.2

Hopetech Electronics Technology
2
Content
Contents Introduction.........................................................................................................................................4
Chapter 1 Size and Installation...........................................................................................................................8
1 .1 Dimension ..............................................................................................................................................8
1.2 Angle adjustable ......................................................................................................................................8
1.3 Installation...............................................................................................................................................9
1.4 Plug in Power Cord .................................................................................................................................9
Chapter 2 Quick Start.......................................................................................................................................11
2.1 Product Introduction..............................................................................................................................11
2.2 Features .................................................................................................................................................11
2.3 Front Panel ............................................................................................................................................13
2.4 LCD Status Bar Function ......................................................................................................................15
2.5 Rear Panel .............................................................................................................................................16
2.6 First turn-on checkout ...........................................................................................................................17
2.6.1 Self-test Process.....................................................................................................................17
2.6.2 In the Event of a Problem......................................................................................................18
Chapter 3 Functions and Features .......................................................................................................................19
3.1 Basic Operation Modes ......................................................................................................................19
3.1.1 Constant Current Mode (CC)................................................................................................19
3.1.2 Constant Voltage Mode (CV) ................................................................................................20
3.1.3 Constant Resistance Mode (CR)..........................................................................................21
3.1.4 Constant Power Mode (CW) .................................................................................................22
3.2 List Operation........................................................................................................................................23
3.3 OCP Test Function.................................................................................................................................27
3.4 EFFT Function ......................................................................................................................................29
3.5 Auto test function ..................................................................................................................................30
3.6 Dynamic Function .................................................................................................................................35
3.7 Battery test function ..............................................................................................................................39
3.8 Short-circuit Simulation Function .........................................................................................................41
3.9 LED Simulation Function .....................................................................................................................42
3.10 SWEEP dynamic frequency conversion scanning...............................................................................46
3.11 TIMING Time measurement ............................................................................................................48
3.12 DCR DC Resistance Measurement Function ...................................................................................50
3.13 Measurement item ............................................................................................................................52
3.13.1 Voltage, current, resistance and power measurement ...................................................52
3.13.2 Ripple measurement............................................................................................................53
Chapter 4 System settings and Save function......................................................................................................54
4.1 System Settings .....................................................................................................................................54
4.1.1 Von/Voff Function....................................................................................................................55
4.1.2 Source Type Selection Function...........................................................................................56
4.2 Configuration ........................................................................................................................................56
4.2.1 Remote Sense Compensation Mode...................................................................................58
4.2.2 Shortcut Call Mode.................................................................................................................59
4.2.3 Trigger Output Settings..........................................................................................................60
4.3 Save/Recall Function ............................................................................................................................60
Chapter 5 Protection Function.............................................................................................................................62
5. 1 Over-voltage protection (OVP) ............................................................................................................62
5.2 Over-current protection (OCP)..............................................................................................................62
5.3 Over-power protection (OVP)...............................................................................................................63
5.4 Over-temperature protection (OTP) ......................................................................................................63
5.5 Input Voltage Reverse Protection (RV) .................................................................................................64
Chapter 6 I/O Interface........................................................................................................................................65
6.1 I/O Interface .......................................................................................................................................65
6.2 I/O Interface Function ........................................................................................................................65
Chapter 7 Specifications...................................................................................................................................67
7.1 Main Specifications...............................................................................................................................67
Chapter 8 Communication Interfaces..................................................................................................................73

Hopetech Electronics Technology
3
8.1 Communication module ........................................................................................................................73
8.2 DB9 .......................................................................................................................................................73
8.3 Protocol .................................................................................................................................................74
8.4 SCPI Communication Instruction .........................................................................................................75

Hopetech Electronics Technology
4
Contents Introduction
Thank you for purchasing Hopetech 8000 series DC Electronic Load. To obtain maximum
performance from the product, please read this manual first, and keep it handy for future reference.
We will use the alias E-load of DC Electronic Load in the following.
Registered trademarks
Windows and Excel are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
Checking Package Contents
When you receive the instrument, inspect it carefully to ensure that no damage occurred during
shipping. In particular, check the accessories, panel switches, and connectors. If damage is evident,
or if it fails to operate according to the specifications, contact your authorized Hopetech distributor or
reseller.
When transporting the instrument, use the same packaging materials used for the delivery to you.
Check the package contents as follows
No.
Item
Quantity
1
Electronic Load
1
2
User’s Manual
1
3
RS232 Cable
1
4
Power Cord
1
5
Test Report
1
Safety Notes
The instrument is designed to conform to IEC 61010 Safety Standards, and has been thoroughly
tested for safety prior to shipment. However, using the instrument in a way not described in this
manual may negate the provided safety features.
Before using the instrument, be certain to carefully read the following safety notes.
Note
Mishandling during use could result in injury or death, as well as damage to the instrument. Be certain
that you understand the instructions and precautions in the manual before use.
Notation
This manual contains information and warnings essential for safe operation of the instrument and for
maintaining it in safe operating condition. Before using the instrument, be certain to carefully read the
following safety notes.

Hopetech Electronics Technology
5
Indicates very important message in this manual. When the symbol is printed
on the instrument, refer to a corresponding topic in the Instruction Manual.
Indicates DC (direct current)
Indicates a fuse
Indicates earth terminal
In this manual, the risk seriousness and the hazard levels are classified as follows.
Indicates an imminently hazardous situation that will result in death or
serious injury to the operator.
Indicates a potentially hazardous situation that will result in death or serious
injury to the operator.
Indicates a potentially hazardous situation that may result in minor or
moderate injury to the operator or damage to the instrument or malfunction.
Indicates functions of the instrument or relative suggestion of a correct
operation.
Usage Notes
Installation environment
Operating temperature and humidity range
0°C ~ 40°C，< 80%RH(no condensation)
Storage temperature and humidity range
23 ±5°C，< 80%RH (no condensation)
Installing the instrument in inappropriate locations may cause a malfunction of instrument or accident.
Avoid the following locations.
Exposed to direct sunlight or high temperature
Exposed to corrosive or combustible gases
Exposed to water, oil, chemicals, or solvents
Exposed to high humidity or condensation
Exposed to a strong electromagnetic field or electrostatic charge
Exposed to high quantities of dust particles