horiba LAQUAact OM-71 Installation guide

CODE:GZ0000340574A
January, 2017 © 2017 HORIBA Advanced Techno Co., Ltd.
Quick Manual
Portable Dissolved Oxygen Meter OM-71
MEASCAL DATA
LIGHT
SETMODE
ENT
Preparation
① Connect the electrode to the meter
② Press the power key of the meter
MEASCAL DATA
LIGHT
SETMODE
ENT
Press
Temperature connectorElectrode connector
http://www.horiba-water.com

MEASCAL DATA
LIGHT
SETMODE
ENT
Hold the electrode still in clear air.
MEASCAL DATA
SETMODE
MEASCAL DATA
LIGHT
SETMODE
ENT
MEASCAL DATA
SETMODE
ENT
② Start the air calibration
MEASCAL DATA
LIGHT
SETMODE
ENT
②Start the measurement
①Enter the measurement mode
To measurement
If high precision measurement is necessary, perform calibration using the standard solution.
About calibration using the standard solution, refer to the instruction manual.
Calibration
①Enter the calibration mode
Measurement
Press
Conrm that the
instantaneous value
is stable, then
press .
When changes from the blinking
state to the lit state and calibrated value
appears, calibration is complete.
MEASCAL DATA
SETMODE
Immerse 6 cm
or more.
Press
When changes from the blinking state
to the lit state, measurement is complete.
Press
When the batteries run out or the meter will not be used
for a long period, remove the batteries.
NOTE