AH-02412 FAMILY
C
2005-04E1 1
AH-02412 FAMILY
Due to the creativity and progress of fire fighting technology among
highly developed countries, we never give up any chance to upgrade
our new generation fire alarm control panel. We are not only pursuing
higher technology level, but also compact design to meet national
quality standard.
..
This digital control panel primary uses processor to handle relevant
signal, which improve most weak points of traditional control panel.
See below for more details.
(1)The use of microprocessor has improved the unit's correctness
that used to be affected by bad characteristic of traditional devices.
(2)Uses digital mode to transmit and control signal process, which
highly increase the precision of signal.
(3)Internal control voltage uses 5V that prevent burning circuit caused
by traditional high voltage.
(4)Module type design simplified entire system, function up-grade just
has to change related module and no need big work to complete it.
Thus, users are able to save big bucks on up-grade or repair cost.
(5)Microprocessor can be revised according to user's request, its
expand ability has much greater than traditional ones.
(6)Shortage of terminal has not seen on this unit, up to four sets of
signal transfer contacts (relay outputs) are added for new design.
(7)Zone isolating button and control board switches are electronic-type
and used digital 0 and 1 signals for switch control signal. Also they
will not damaged by abnormal high voltage because of undirected
control high voltage and interfered by dust, this phenomenon
usually happened on mechanical-type switch.
Introduction and Characteristics
Introduction
Characteristics
