Horizon Fitness BQ-140 User manual

UM202007-02
011127/BQ140/02E/DV
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

Power Required:
Power Consumption:
Dimentions:
Machine Weight:
120V 60Hz 6.0A
220V 50Hz 5.8A
220V 60Hz 4.3A
240V 50Hz 5.8A
950W/50Hz, 1050W/60Hz
1,450(W) x 525(D) x 1,040(H) [57.1" x 20.7" x 41.0"]
203 kgs (448 lb)
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

WARNING
- Turning on the power switch starts to
heat the glue tank which will finally
reach a temperature of around 180
degrees Celsius. Keep your hands and
fingers away from the glue tank, other-
wise severe personal injury can result.
First, the clamper is needed to move to
the left end to perform the following
procedures.
1. Turn on the power switch and wait for the
start lamp to light which shows that the
hot-melt glue is ready for binding.
NOTE
It takes about 20 minutes to heat the hot-
melt when the BQ-140 was OFF, and about 7
minutes when the BQ-140 was in standby
mode.
2. Select with the binding mode
selector switch.
3. Insert the book block 0.04" (1 mm) into
the clamper so that the book block is
lifted about 0.2" (5 mm) from the nipper.
- The glue is not be applied on the spine.
4. Close the clamper by turning the clamp
handwheel clockwise.
5. Press the start button.
- The clamper moves to the left and stops at
the left end.
6. Press the stop button.
Cover Stopper Installation Instruction
Binding Mode
Selector Switch
Start
Button
Reset Button
Clamp
Handwheel
Stop Button
Power Switch
[Book Binder BQ-140]
UM202028-00 000905/BQ140/HN/HS/HN
(Page 1)
All manuals and user guides at all-guides.com
all-guides.com

7. Install the cover stopper by performing
the following procedures.
1) Check the parts of cover stopper.
2) Insert the bracket into the hole for instal-
lation of cover stopper.
3) Hold the bracket as shown in the follow-
ing drawing.
Bracket
Stopper
Fixing
Screws
(4 mm)
Cover Guide
20.25" (514 mm)
at maximum
Front Cover
Stopper
Cover Stopper Installation Instruction
Bracket
Hole
Bracket
Attention
When you dropped
the bracket off into
the hole, remove the
front cover (6 fixing
screws) to pick up the
bracket.
4) Attach the cover guide to the bracket with
2 fixing screws.
- Installation for the cover stopper is com-
pleted.
8. Pull up the stop button.
9. Press the reset button.
- The clamper moves to the right and stops
at the home position (above the nipper).
10. Open the clamper by turning the clamp
handwheel counterclockwise.
11. Remove the book block by sliding it out
to the right.
Attention
When using this cover stopper, the cover
length is 20.25 " (514 mm) at maximum.
Point
Adjust the stopper according to the cover
length.
[Book Binder BQ-140]
(Page 2)
All manuals and user guides at all-guides.com

PARTS BOOK
BQ-140/BQ-51
Perfect Bookbinding Machine
Vol.2
UB702004-07
061107/BQ140/07/MO
All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

All manuals and user guides at all-guides.com

See Fig.2
See Fig.27,33 See Fig.5,7,32
See Fig.22,23,24
See Fig.18,19,20,21
See Fig.8,9,10
See Fig.12,13,15
See Fig.11
See Fig.25
See Fig.16,17
See Fig.6
See Fig.3
See Fig.26
See Fig.30
See Fig.4
See Fig.1
See Fig.34
BQ-140/51
All manuals and user guides at all-guides.com
all-guides.com

All manuals and user guides at all-guides.com

A
DETAIL A
6
5
1
7
3
8
4
2
BQ-140/51
All manuals and user guides at all-guides.com

B
Q
-140/B
Q
-51
INDEX Parts No. Qt
y
S/N From ToDescri
p
tion Price Remarks
Fi
g
.
1
1 M013548-02 1COVER
2 M013542-00 1REAR COVER
3 4000286-00 1CAUTION PLATE
4 M013549-00 1MELT TANK COVER
5 M013545-00 1FRONT COVER
6 M013612-00 3SPACER
7 M013626-01 1COVER
8 4003143-01 1LABEL
All manuals and user guides at all-guides.com

See Fig.3
See Fig.4
6
7
6
7
4
3
11
8
9
10
5
5
1
2
BQ-140/51
All manuals and user guides at all-guides.com