Hoselink 4852-WG User manual

Soaker Hose (7.5m & 15m)
youtube.com/hoselink
MODEL: 4852-WG / 4853-WG
Soaker Hose (7.5m &15m)
MODEL: 4852-WG / 4853-WG
Cultivating ConnectionsCultivating Connections
User ManualUser ManualUser ManualUser ManualUser Manual
User Manual
User ManualUser Manual
For more information visit
hoselink.com.au
or call
1300 900 617

Kit Contents
1 x 7.5m or 15m Soaker Hose
1 x Hoselink Accessory Connector
The Hoselink Soaker Hose is perfect for watering areas
up to 4 metres wide (2 metres either side). Small holes
are featured across the length of the hose to ensure even
watering and coverage.
Using the Soaker Hose
1 Position hose
Lay the soaker hose along the desired section of your
garden.
2 Connect
Connect your Hoselink Accessory Connector to the black
cap at the end of the Soaker Hose.
3 Connect hose
Using the Accessory Connector, you can then connect to
your Hoselink-fitted Hose.
NOTE 1 Use the Soaker Hose as a sprinkler by laying
the hose with the holes facing upwards, or you can deep
water by facing the jets towards the ground.
Extending Hose Length
For greater length, you can connect two soaker hoses
together. Cleverly designed with an internal thread at one
end and an external thread on the other, simply remove
the Hoselink Accessory Connector and stop cap from one
of the hoses, then connect it to your second hose.
NOTE 2 Please note, we advise connecting no more than
two 15m soaker hoses together to prevent water pressure
issues from occurring.