Hoselink 5567 User manual

Brass Spray Nozzle
youtube.com/hoselink
MODEL: 5567
Brass Spray Nozzle
MODEL: 5567
Cultivating ConnectionsCultivating Connections
User ManualUser ManualUser ManualUser ManualUser Manual
User Manual
User ManualUser Manual
For more information visit
hoselink.com.au
or call
1300 900 617

Kit Contents
1 x Brass Spray Nozzle
Ranging in force from light mist to hard jet spray, the
durable Brass Spray Nozzle is the perfect partner for
effective watering. The strength of the water flow can
also be adjusted with a simple twist of the nozzle.
Troubleshooting
Leaking internally
There are two O-rings located on the internal bar. If damaged
or if leaking occurs, remove and replace the O-rings.
Nozzle sticking/stiff to turn
Remove the internal bar and apply some silicone-based
lubricant to the O-rings.
Cleaning & Maintenance
Continue to twist the nozzle in an anti-clockwise
direction until the internal bar can be removed. This
allows you to clean and remove any debris that might
be caught inside the nozzle. Should you need to replace
the O-rings on the internal bar, you can also purchase
these from Hoselink.
Note: This product does not come with a Hoselink
Fitting, therefore we recommend you purchase either a
Hoselink Accessory Connector or Accessory Connector
with Swivel if you already have Hoselink fittings on your
hose. If you’re new to Hoselink, we recommend purchasing
a Starter Kit, which will come complete with all the
fittings you need for your hose.
Replacement Parts
O-rings
Please contact Hoselink Customer Care team directly to
arrange replacement parts.