Hoselink L125 User manual

Patterned Solar Wall Light |
1LED | 4 Pack | ORBIT
For more information visit
hoselink.com.au
or call
1300 900 617
youtube.com/hoselink
MODEL: L125
Cultivating ConnectionsCultivating Connections
MODEL: L125
User ManualUser ManualUser Manual
Patterned Solar Wall Light | 1LED |
4 Pack | ORBIT

Kit Contents
1 x Removable solar panel
1 x Decorative frame
The dim mood lighting creates a gorgeous pattern
effect against any surface or backdrop. The light
comes complete with a built-in intelligent sensor that
automatically illuminates at night and turns off at dawn.
Activate the Light
To activate the light, remove the solar panel from the
frame using the small opening on the back of the light,
allowing you to lift it out. Click the on/off button, then
push the solar panel back into the frame. To test the light,
hold your hand over the solar panel and checking if the
light comes on.
Product Installation
STEP 1 Find a suitable location
Solar lights need access to direct sunlight for optimum
results; preferably 6-8 hours per day.
STEP 2 Install the light
Installation - Option 1
For a masonry install.
Using an electric drill (hammer or rotary), make a hole
with a 6mm masonry drill piece. Hammer the plug into
place then secure the screw.
Installation - Option 2
For a timber install.
Using an electric drill, make a hole with a 3mm drill piece
then secure the screw (without the plug).
Specifications
NOTE: if the light does not turn on, this could be
due to the battery not being charged. Leave out in
direct sunlight for 6–8 hours and try again.
WARNING: do not use underwater or in
low lying puddles.
Solar panel 2V / 0.4W
LED Lumens 24–26 lumens
Light Temperature 3000–3200 kelvins
Lithium Battery 400mAh / 1.2V
Charge Time 6–8 hours
Working Time 10–12 hours
Eective Range 1–1.5 meters / 120 degrees