Hoselink L520 User manual

Solar Garden Path Lights | Cool White |
3 Bollards | SILHOUETTE
For more information visit
hoselink.com.au
or call
1300 900 617
youtube.com/hoselink
MODEL: L520
Solar Garden Path Lights | Cool White |
3 Bollards | SILHOUETTE
MODEL: L520
Cultivating ConnectionsCultivating Connections
User ManualUser ManualUser Manual

Kit Contents
3 x Solar Path Light Bollards
These cool white Solar Garden Path Lights emit a vivid
white tone, making any outdoor setting pop.
The bollards themselves can then be used in any light
situation, dim, sunny or otherwise, to perfectly illuminate
feature planting or outdoor areas.
The solar lights are 100% waterproof and weather-resistant,
made of rustproof stainless steel material to prevent them
from deteriorating and giving you a longer-lasting product.
Solar Panel Assembly
Thread the screw through the bracket
located on the back of the solar panel,
then push the spike over the screw,
securing with the supplied nut. The
solar panel can either be mounted by
using the supplied screws and plugs or
inserted into the ground using the spike.
Product Installation - Option 1
Masonry install.
Using an electric drill (hammer or rotary), drill a hole with
an 8mm masonry drill bit, hammer plugs into place and
then secure the screws.
Product Installation - Option 2
Timber install.
Using an electric drill, drill a pilot hole with a 4mm drill bit
to guide the screws (plastic plugs not required).
Product Installation - Option 3
Using the Ground Spikes.
Push the spike into the base of the solar panel and/or
bollards until secured then simply push into soft ground in
your desired location.
Activate the Light
STEP 1 Find a suitable location
Solar lights need access to direct sunlight for optimum
results, preferably 6-8 hours per day.
STEP 2 Connecting lights and solar panel
Push the three cables into place being mindful not to
damage the prongs inside the connection, then tighten
collar for a watertight seal.
STEP 3 Activate the lights
Press and hold the white button on the back of the solar
panel for 3 seconds to turn the light on and off.
Be sure to clean the solar panel periodically to maintain
optimal performance.
Specifications
WARNING: do not use this light underwater
or in low lying puddles
Solar Panel 6W
LED Lumens 100 lumens
Cable Length 9 metres
Lithium Battery 2 x 4500mAh / 3.7V
Charge Time 6–8 hours
Working Time 6–8 hours