Hoselink L510 User manual

Modern Solar Bollard Light | Motion
Sensor | 40LED | TORUS
For more information visit
hoselink.com.au
or call
1300 900 617
youtube.com/hoselink
MODEL: L510
Modern Solar Bollard Light | Motion
Sensor | 40LED | TORUS
MODEL: L510
Cultivating ConnectionsCultivating Connections
User ManualUser ManualUser Manual

Kit Contents
1 x Solar Bollard Light
This light is ideal for illuminating pathways and
highlighting landscapes. The light turns on automatically
at dusk and off at dawn and features a built-in
motion sensor.
Lighting Modes
1 Constant dim light
A dim light is displayed continuously from dusk until dawn.
2 Sensor with dim light
A dim light is displayed continuously from dusk until
dawn. When motion is detected the light brightens for 25
seconds before returning to a dim light.
3 Sensor with bright light
The light will remain off until motion is detected then the
brightest light setting will be activated.
Product Installation - Option 1
Masonry install.
Using an electric drill (hammer or rotary), drill a hole with
a 7mm masonry drill bit, hammer plugs into place and
then secure the screws.
Product Installation - Option 2
Timber install.
Using an electric drill, drill a pilot hole with a 3mm drill bit
to guide the screws (plastic plugs not required).
Product Installation - Option 3
Using the Ground Spikes.
Push the spike into the base of the solar light until secured
then simply push into soft ground in your desired location.
Activate the Light
STEP 1 Find a suitable location
Solar lights need access to direct sunlight for optimum
results, preferably 6-8 hours per day.
STEP 2 Activate the lights
Press and hold the white button on the bollard for 3
seconds to turn the light on and off. To change between
lighting modes, simply press the white button to select.
Be sure to clean the solar panel periodically to maintain
optimal performance.
Specifications
WARNING: do not use this light underwater
or in low lying puddles
Solar Panel 1.8W
Sensing Angle 90 degrees
Sensing Distance/
Delay Time
3–5 metres /
25 seconds
Lithium Battery 2200mAh / 3.7V
Charge Time 6–8 hours
Working Time 6–8 hours