Hoselink L512 User manual

Modern Metal Solar Bollard | Warm
White | 2 Pack | PILLAR User Manual
MODEL: L512
MODEL: L512
For more information visit
hoselink.com.au
or call
1300 900 617
Cultivating Connections
youtube.com/hoselink
Cultivating Connections
Modern Metal Solar Bollard | Warm
White | 2 Pack | PILLAR
User ManualUser Manual

Kit Contents
2 x Modern Metal Solar Bollard
2 x Ground Spikes
The perfect blend of functionality, style, and sustainability.
Designed to illuminate any outdoor space with a
contemporary flair.
Activate the light
To activate the light, lift the round solar panel from the
bollard and slide the ‘ON/OFF’ button to the ‘ON’ position.
To test the light, cover the solar panel with your hand
and check if the light comes on. The solar panel has a
built-in intelligent light sensor, which detects darkness,
automatically illuminating the light at dusk and turning it
off at dawn.
Product Installation
STEP 1 Find a suitable location
Solar lights need access to direct sunlight for optimum
results; preferably 6-8 hours per day.
STEP 2 Install Solar Light
Product Installation – Option A
Ground Spike
A.1 Remove spike from the inside of the solar light and
push the spike into the base of the solar light until secured
then simply push into soft ground in your desired location.
Be sure to clean the solar panel periodically to maintain
optimal performance.
Storing the Lights
Manually switch the power to ‘OFF’. This will preserve
the battery and prevent it from fully discharging during
extended storage.
Specifications
WARNING: Do not use this light underwater
or in low-lying puddles.
Solar panel Monocrystalline Silicon
Battery NI-MH 1.2v 1200mAh
Operating time 8 – 10 hours
Charge time 6 – 8 hours
Light temperature (Kelvins) 3200K
LED lumens 20 Lumens
Number of LEDs 3