
Kit Contents
2 x Solar Path Lights
An attractive and practical lighting solution for paths,
walkways and landscaped areas. This light automatically
turns on at dusk and features a built-in motion sensor that
brightens the light when motion is detected, switching
itself back to a dim light after 22 seconds.
Lighting Mode
Sensor with dim light
A dim light is displayed continuously from dusk until dawn.
When motion is detected the light brightens for 22 seconds
before returning to a dim light. This light features a built-in
1500mAh Lithium battery to ensure a long working time.
Product Installation
Installing the solar garden spotlight.
STEP 1 Find a suitable location
Solar lights need access to direct sunlight for optimum
results, preferably 6-8 hours per day.
STEP 2 Activate the light
Activate with the switch located on the base of the light
head. Once the light is on you will see the blue indicator
light. After charging the light will automatically come on
at dusk and turn off at dawn.
STEP 3 Assemble the ground spike
Slot the 3 ground spike components together. Then, push
the spike into the ground. Finally, slot the light on top. The
middle section can be removed to adjust the height.
Be sure to clean the solar panel periodically to maintain
optimal performance.
Specifications
NOTE: if the light does not turn on, this could be
due to the battery not being charged. Leave out in
direct sunlight for 6–8 hours and try again.
WARNING: do not use this light underwater
or in low lying puddles
Solar Panels 6V / 0.7W
LED Light Source 0.5W
Sensing Angle 120 degrees
Lithium Battery 3.7V 1500mAh
Control Mode Photosensitive control
& PIR sensing
Charge Time 6-8 hours
Working Time 10-12 hours (bright light)
100-120 hours (dim light)
Sensing Distance / Delay Time 3-5 metres / 22 seconds