Hotone Soul Press II User manual

Volume / Expression / Wah pedal
www.hotoneaudio.com

Volume / Expression / Wah pedal
1. INPUT:
1/4"mono audio jack,
for connecting guitar.
2. MODE:
V—Volume mode, for use as volume pedal.
W—Wah mode, for use as a wah pedal.
V/W—Switchable volume/wah mode,
combining volume and wah pedals in one.
5. DC IN:
Plug in 9V DC adapter (center negative).
3. TONE:
For selecting wah filter frequency range.
4. Q:
For adjusting wah filter frequency width.
DC9V
Q
INPUT
V·W·V/W WARM·CLASSIC
MODE
7. Battery Compartment:
Forholdinga9Vbattery.

12345
6
7
6.LED:
MODE LED Color
V
W
V/W
Green
Blue
Green/Blue

Thank you for purchasing a Hotone product.
Scan the QR code for manuals in other languages.
感谢您购买Hotone产品，请扫描右侧⼆维码获取其他语⾔说明书。
EXP OUT OUTPUT
STATUS
TUNER OUT
Panel
9. STATUS:
A set of LEDs showing the
current pedal position.
You can set the LEDs on demand
by the 3-way switch hidden in
the battery compartment.
8. Footswitch:
Switch between on/off
status or active volume
/wah in V/W mode (Soul
PressIIcannotbebypassed
in V/W mode).
10. EXP OUT:
1/4” TRS jack, for connecting to another
device with EXP control IN jack. EXP out
works in any mode.
When used as an expression pedal, Soul
Press II can work without a power supply.
12. TUNER OUT:
1/4" mono audio jack,
for connecting tuner.
Perfect for Hotone
Skyline Tuner.
11. OUTPUT:
1/4"mono audio jack, for connecting
to one other gear.
8
9
10 11 12

Pot Resistance (EXP out): 10kΩ
Input Impedance: 1MΩ
Output Impedance: 100Ω
Wah Range Selector:
WARM—290Hz to 1.4kHz
CLASSIC—360Hz to 1.8kHz
Current Consumption: Max 30mA
Dimensions: 81mm (W) x 162mm (D) x 51mm (H)
Weight: 500g
Specifications
Battery Installation & STATUS Setting
1. Remove two screws from the battery compartment
with a phillips screwdriver.
2. Remove the battery compartment cover.
3. Install a 9V battery.
4. Use the 3-way switch to set STATUS LEDs.
There are three options available:
All Off: Switches the STATUS LEDs off.
All On: The STATUS LEDs work in all modes.
VOL Only: The STATUS LEDs work only in VOL mode.
All Off All On VOLOnly
※ In the interest of product
improvement, the specifications and/or
the content of products (including but not
limited to appearances, packaging
design, manual content, accessories,
size, parameters and display screen), are
subject to change without prior notice.
Please check with local supplier for exact
offers. Specifications and features
(including but not limited to
appearances, colors and size) may vary
by model owing to environmental
factors, and all images are illustrative.