HOTOWELL HTW-WF06 Series User manual

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- 1 - Version 2018-1.0
HTW-WF06 series Wifi thermostat is widely used in these environment like Homes, Residential buildings,
S hools, Hotels, Hospitals, Offi es and et . to main an ideal room temperature purpose. It an be used in
Ele tri Underfloor Heating, Water Heating or Water/Gas Boiler systems.
 17 Mainstreaming Languages syn hronize in APP( English, Sp nish, Russi n, Hung ri n, Turkey, Hebrew, Germ n,
It li n, J p nese, French, Pol nd, simplified Chinese, tr dition l Chinese, Holl nd, Portuguese, Vietn mese, Ar bic, Kore n )
 Snap-In Easy Installation
 Fit for EU & Standard Jun tion Ele tri Box
 Easily Work with Amazon Alexa, Google Assistant, IFTTT
 Group Control in 1 App
 Fashion Sense of S ien e and Te hnology
Consise Design
Ordering Information
HTW-WF06- ** Smart Wifi Thermostat
Code Appli ation
-3A Water Heating, 3A, NC+NO+Com output terminals
-16A Ele tri Underfloor Heating, 16A, L+N line voltage output terminals
-NV Water/Gas Boiler, 3A, 1 pair of Non-Voltage output terminals
e.g. HTW-WF06-3A refers to application:Water Heating, 3A, NC+NO+Com o tp t terminals
General
Features
Ordering Guide
-3A -16A -NV

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- 2 - Version 2018-1.0
Power Su ly 95~240Vac, 50/60Hz Sensor NTC3950, 10K
Current Load 3A(-3A, -NV appli ation) Tem erature Accuracy ±0.5°C or ±1℉
16A(-16A appli ation) Set-Point Range 5~35°C
Storage Tem . -5 ~ 45 °C Dis lay Tem . Range 5 ~ 99°C
Power Consum tion < 1.5W Timing Error < 1%
Housing Material PC +ABS ( Fireproof) Installation Box EU or Standard Ele tri Box
Wires on Terminals Wire 2 x 1.5 mm
2
or 1 x 2.5 mm
2
Protection Class IP20 O erating Buttons Capa itive Tou h Buttons
 Make sure the power is OFF! Try turning ON your heating/ ooling system by hanging the temperature. If
you an’t get the system to turn ON in 5 minutes, you’ll know the power is OFF.
 Take off the installation fa eplate by rotating and gently pulling, then onne t voltage supply/load
output/external sensor(if with) wires respe tively to appropriate terminals.
 Fix the installation plate onto the ele tri jun tion box with s rews pa ked in the box.
 Fasten the thermostat display part and the installation fa eplate through the groove.(Installation pro ess
ompleted)
WARNING: RISK OF ELECTRICAL SHOCK. Dis onne t power supply before making ele tri al onne tion. Conta t
with omponents arrying hazardous voltage an ause ele tri al sho k and may result in severe personal injury or
death.
Dimensions and Dis lay
S ecification
Installation

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- 3 - Version 2018-1.0
Buttons/Functions O eration
Swit h thermostat power On or Off
In rease or de rease set-point or parameters
Set the time and weekday:
Tou h this i on to set Minute/Hour and Weekday (1 = Monday, 2 = Tuesday et .)
In rease or de rease parameters by using the arrow i ons.
Press on e more to onfirm and swit h to next relevant parameter setting.
Lo k/Unlo k
Press these 2 buttons simultaneously and hold for 5 se onds to lo k/unlo k
thermostat.
Notes: In p r meter 3 of ISU process, Full/H lf lock configur ble.
M
Swit h between Manual and Programmable mode
In manual mode, this i on appears in the button left display
In programmable mode, the period i on appears in the right side.
Notes: In progr mm ble mode, the Temper ture nd Time c n not be djusted
Programmable
S hedule
Configuration
(5+2 weekly)
1.Press M button swit h working mode to Programmable mode.
2.Set the time and weekday:
Tou h this i on to set Minute>Hour> Weekday (1 = Monday, 2 = Tuesday et .)
In rease or de rease parameters by using these i ons .
Press on e more to onfirm and swit h to next relevant parameter setting.
3. Tou h the i on again to set the weekday s hedule [settings appear (1 2 3 4 5)
will show along the top of the s reen].
Likewise, use and be omingly to adjust the time/temperature for the 1-6
period per day.
Repeat the above pro ess to set the weekend s hedule. Press on e more to
onfirm and exit.
Ex-factory Defa lt Settings
Time display WEEKDAY (MON. – FRI.) WEEKEND (SAT. – SUN.)
TIME TEMP. TIME TEMP.
Period 1 (Comfort) 06.00 waken 20°C 06.00 waken 20°C
Period 2 (Economy) 0 .00 leave 15°C 0 .00 leave 20°C
Period 3 (Comfort) 11.30 home 15°C 11.30 home 20°C
Period 4 (Economy) 13.30 leave 15°C 13.30 leave 20°C
Period 5 (Comfort)(1+2) 17.00 home 22°C 17.00 home 15°C
Period 6 (Economy)(3+4) 22.00 bed 15°C 22.00 bed 15°C
Floor Temperature
Display
Press and hold the for 5 se . to display the temp. of floor sensor(if onne ted).
Notes: During the thermost t in wifi connected st tus, it runs the progr mm ble schedule process m de from APP prior to th t of
thermost t. i.e. The progr mm ble schedule only c n be c rried out if there is no Wifi connection between thermost t nd
sm rtphone/t blet PC.
O eration

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- 4 - Version 2018-1.0
The installation personnel with non-professional training shall not perform this operation!
During thermostat power off, Press these 2 buttons M & simultaneously and hold for 5 se onds to enter
ISU pro ess. Press to adjust the onfigurable parameter value, and press M to swit h to next parameters.
The ISU pro ess will automati ally exit and be onfirmed after 5 se onds with no operation.
Parameter
Function Configurable Value Default
1 Tem erature calibration -7°C to +9°C (internal sensor) -1
2 Dead Zone 1°C to 5°C (Swit hing differential) 1
3 Key ad Lock ty e 00: = All buttons will lo k ex ept the Power button
01: = All buttons will lo k
01
4 Sensor selection
In = Internal sensor(to ontrol or limit the temperature)
OU= External sensor(to ontrol or limit the temperature)
Al = internal sensor to ontrol temperature, and external sensor
to limit the floor temperature.
Notes: Ple se m ke sure configure the right sensor. The thermost t
displ y Err. If wrongly configured.
In for model:
-3A
-NV
Al for model:
-16A
5 Min. set- oint limit 5°C - 15°C 05
6 Max. set- oint limit 15°C - 45°C 35
7 Tem erature Dis lay 00
： display both set-point and room temp.
01 ： display set-point only
00
8 Low Tem erature
Protection
0°C - 10°C 00
9 High Tem erature
Protection
25°C - 70°C 45
A Economy Mode 0
： Normal mode
1 ： Energy Saving mode
0
B Economy Tem erature 0°C - 30°C 20
C Standby Brightness 3-99 04
 Produ ts are warranted for 2 full year ( he king and repairing
servi es) from the date of pur hase whi h produ ts are not
being damaged by any man-made fa tors.
 Servi e outwith the warranty period may in ur an extra harge.
 More details please onta t with Hotowell dire tly.
Installer Set-UP Process (ISU)
Warranty

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- 5 - Version 2018-1.0
Use your smart phone or tablet PC to s an the QR ode below or Sear h “SMART LIFE” in the app store
/Google play to download and install APP .
 Open “SMART LIFE” appli ation, li k “Allow” on the pop up notifi ation dialog(fig 2.1)
 Press “register” button on the register page(fig2.2)
 Sele t your region and type in your phone No. or email (fig 2.3) then you may get a verifi ation ode.
Type in your password and onfirm (fig 2.4) to omplete your registration.
 If you already have an a ount, please just log in.
On t e t ermostat
During power off status, press and hold the arrow i on for 8 se until the onne ting i on appears on
the thermostat s reen and flashes on e a se .
Wifi Connection
Ste 1- Download and Install APP
Ste 2- Register your account
For ios system For Android system
fig 2.1 fig 2.2 fig 2.3 fig 2.4
Ste 3- Connect A with Thermostat
App Icon

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- 6 - Version 2018-1.0
On t e App
 Press the “+” on the upper right orner of the page (see Fig 3.1) or “Add Device” to add thermostat.
 Cli k “Confirm indi ator rapidly blink” (Fig 3.2) then sele t your network and ba k to your App to enter the
password of your wireless router(Fig.3.3) and onfirm.
 The App will onne t with the thermostat su essfully. The onne ting pro ess takes 5~90 se , the
thermostat name an be editable on e onne ted.(Fig.4.4)
***If the thermostat has already been connected under above ste s, lease ignore this rocess.***
This SMART LIFE App is only supported on 2.4GHz Wi-Fi hannels.
If the router does not be supported, or the wi-fi signal is weak or thermostat an not be onne ted as above
steps, please try this AP mode onne tion pro ess.
On t e t ermostat
 During power off status, press and hold the arrow i on for 8 se until the onne ting
i on
appears on the thermostat s reen and flashes on e a se .
 press and hold the arrow i on for 8 se again, the i on will flash on e per 3 se .(fig 4.1)
indi ates onne ting from normal router mode.
Indi ates onne ting from AP mode.
On t e App
 Cli k “Confirm indi ator slowly blink” (fig 4.1) then sele t your network and ba k to your app to enter the
password of your wireless router (fig 4.2) and onfirm. The app will go into the page(fig 4.3)
 Press “Conne t now” to sele t the wifi signal Smart life-XXXX from the thermostat(fig 4.3).
 This AP mode onne tion pro ess may typi ally take approx. 5~90 se onds to omplete.
 The thermostat name an be edited after onne tion (fig 4.4).
fig 3.1 fig 3.2 fig 3.3 fig 3.4
Alternative AP mode Connection

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- 7 - Version 2018-1.0
A Icons Functions
Swit h thermostat power On or Off
Lo k/Unlo k I on. Lo ked=Green, Unlo ked=Grey
E onomy mode. The thermostat runs with the set-point onfigured as Parameter B in ISU
E onomy set-point=20°C in default.
Thermostat runs in Manual Mode
Thermostat runs in Programmable Mode
When thermostat runs in programmable mode, li k the “s hedule setting”(fig 5.1) to swit h to the s hedule
page(fig 5.2), where you an simply onfigure the weekly programmable 5+2 s hedule up to 6 period ea h day.
(Workdays=Monday~Friday, Weekend=Saturday and Sunday)
Cli k “Complete” to save the onfiguration.(fig 5.3)
fig 4.1 fig 4.2 fig 4.3 fig 4.4
O eration Icons on APP
Programmable Schedule Setting
f
ig
5
.1
fig
5
.2
fig
5
.3

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- - Version 2018-1.0
 Press the menu button as fig 6.1, then li k “Create Group”. Sele t all the rooms you want and onfirm.(fig
6.2 and fig 6.3), edit the group name or ungroup as fig 6.3 and fig 6.4
 Group Control allows to ontrol all thermostats(+∞ units) onfiguration in the group at the same time.
 Method 1: Cli k “Share with Familay” as fig 4.4.
 Method 2: Cli k “Profile”>”Sent”>”Add”>Swit h on the devi e>”Share with New Member”>Type in the
telephone number you would like to share with.
 Method 3:Home page of the devi e>Menu(as fig 6.1)>”Devi e Sharing”>”Add”>>Type in the telephone
number you would like to share with.
Cli k “Profile”>”Integration”>Sele t amazon e ho/Google Home/IFTTT>”Use Now”
Details as below fig 7.1 and 7.2.
Grou Control and Info. Modify
fig 6.1 fig 6.2 fig 6.3 fig 6.4
Share Thermostat with Others
fig 7.1
Work with 3rd arty Echo Control
fig 7.2

Smart Wifi Thermostat
Reference No.:HTW-WF06 Series
- 9 - Version 2018-1.0
 This pro ess is to ustomize your own personal s enes to suit your needs, for example, set your home
temperature automati ally when you ome ba k home.
 There are 4 s enes in default setting, and an be added/deleted at will.
 Here set an example of a spe ifi s ene: “leave home for holiday” and turn on the thermostat when
temperature lower than 5°C
 S enes(fig 8.1)>+>Enter a name for the s ene(fig 8.2)>Add a ondition(Below 5°C as fig 8.3)>Add a Task(fig
8.4)>Save
No. If… Then…
1 Power is on but without display.  Che k if the terminals between LCD panel and
Relay/Power Module is loosen.
2 Without output but display works.  Use a new LCD panel or new Relay/Power
Module for Repla ement
3 Room Temp. on display is not orre t  Do temperature alibration in parameter in ISU
4 Heating system does not respond
 Set the mode to heating by press-ing the M
button.
 Make sure the temperature is set above the
room temperature.
 Make sure “heat on” i on shows on the display.
 Wait 5 minutes for the system to respond.
5 The M or In rease/De rease button
doesn’t work
 Make sure keypad is unlo ked.
 Che k that thermostat is on.
Notice: Hotowell reserves all t e rig t for t e final explanation. T e manual is subject to c ange wit out furt er notice.
Customize Scene
fig 8.1 fig 8.2 fig 8.3 fig 8.4
Trouble Shooting