Howard ArrivScan micro Instruction manual

FOR SUPPORT CALL: (888) 323 - 3151 1
HOWARD ARRIVSCAN MICRO QUICK START MANUAL

2HOWARD INTERACTIVE KIOSK INSTALLATION GUIDE
TABLE OF CONTENTS
MIPS and Android ..........................................................................3
MIPS Open and Close...............................................................3
MIPS File Storage Path..............................................................4
Basic Settings for Android.........................................................4
MIPS Function Description.............................................................5
Body Temperature Setting ........................................................6
Identication Parameter Settings ..............................................7
Start Up Settings .......................................................................8
Application Information Settings ...............................................8
Relay Settings............................................................................9
Other Settings............................................................................9
Face Data Entry.......................................................................10
Face Database........................................................................10
Pass Record............................................................................11
Application Information ...........................................................11

FOR SUPPORT CALL: (888) 323 - 3151 3
MIPS AND ANDROID
This product is based on the Android system, installed with MIPS face recognition temperature measurement
application, with a built-in face recognition camera module and infrared temperature detector, capable of
personnel access management and temperature detection. The user stands in front of the camera to check
the body temperature. There is no need for human contact. It is recommended that the distance from the
camera is 0.5~1 meters, and the forehead is positioned at the red dot in the viewnder frame, so that the
measurement can be accurate. dolly (minimum 300lb capabilities)
MOUSE ACTION
The product can be managed by connecting the mouse through the USB interface. Operation method: Click
the left mouse button to conrm/enter, click the right mouse button to cancel/exit, and click the middle mouse
button to pop up the interface.
MIPS OPEN AND CLOSE
OPEN
MIPS is started by default. Face recognition and temperature measurement can be started after switching on
the power.
CLOSE
In the MIPS application interface, connect the mouse through the USB interface, double-click the right button,
repeat twice, and after the prompt pops up, enter the operation password in the password box (default
123456); you can exit the application and return to the Android system interface.
MIPS APPLICATION DAEMON
MIPS will periodically check to see if the application is working, and if not, it will automatically open the
application. You can choose to turn it off in the MIPS application settings menu.
MANUAL START
In the Android system interface, select the MIPS icon from the app menu and click to enter the MIPS to start
face recognition and temperature measurement.

4HOWARD INTERACTIVE KIOSK INSTALLATION GUIDE
MIPS FILE STORAGE PATH
REAL-TIME DATA
MIPS will automatically record all visitors, generate a picture le, and store it locally in the Android system
explorer. The specic path is: Internal Memory / currentlmg
ENTRY DATA
MIPS can also take the initiative to input personnel data as a comparison basis for face recognition. In the
MIPS application menu, select Face data entry operation. The corresponding generated image data is stored
locally in the Android system explorer. The specic path is: Internal Memory/viplmg
BASIC SETTINGS FOR ANDROID
LANGUGES AND INPUT
Enter the setting interface of the Android system and select “language & input.” After adding the target
language, drag the target language to the rst priority, and the system will automatically switch to the rst
priority language.
DATE AND TIME
Enter the settings interface of the Android system and select “date & time.” Turn off “auto determine date and
time” and “auto determine time zone,” then you can manually set the date and time.
OTHER
In the Settings interface of the Android system, you can also adjust display settings, volume settings, storage
space management, and other operations. The operations are simple, and not described here.

FOR SUPPORT CALL: (888) 323 - 3151 5
APPLICATION SETTINGS
MIPS FUNCTION DESCRIPTION
Connect the mouse; click on the middle mouse button; enter the default password “123456” to open the
[Application Management] interface, which displays the current login state and ve functions, i.e. “Application
settings”—“Face data entry”—“Application information”—”Pass record” and “Face database.”
Enter the operation password
Application settings interface
Open the application management interface
DEVICE NAME SETTING
Custom device name.

6HOWARD INTERACTIVE KIOSK INSTALLATION GUIDE
BODY TEMPERATURE SETTINGS
TEMPERATURE DETECTION
“Open” means to open the temperature detection function; “Turn off” means turn off the temperature
detection function.
COMPENSATION TEMPERATURE
Compensation value is set according to the ambient temperature. When the ambient temperature is higher
than 25°C, it is set as -0.3; when the ambient temperature is lower than 25°C, it is set as +0.3.
ALARM THRESHOLD
Set the alarm temperature threshold of the system, and when the body temperature of the detected person
exceeds the threshold, the system will send an alarm.
TEMPERATURE ALARM
“Open” means open temperature alarm; “Turn off” means turn off the temperature alarm.
FAN
Fan switch is behind the detector.
MASK DETECTION
Open, it automatically identies whether or not the target is wearing a mask; if not, an alarm will be issued.
Temperature detection setting interface

FOR SUPPORT CALL: (888) 323 - 3151 7
For the judgment coefcient of face recognition AI, please use the default value of the system; adjustments to
this parameter are not recommended.
CHECK THRESHOLD
Set the face detection parameters—default is 17, normal without changing.
RECOGNITION TIMES
Set the number of face recognition conrmations—default is 3 times, normal without changing.
LIVING BODY
“Open” means open living body dynamic detection; “Close” means to close the dynamic detection living
body (By default)
VOLUME SETTING
Set the alarm volume. In case of invalid situation, please exit the app and adjust the volume in the Settings
interface of the Android system
Identication parameter settings interface
STRANGER MODE
Open will automatically compare information in the face database; if no personnel data has been entered, the
target will be judged as a stranger, and an alert will be issued.
STRANGER RECORDS
Records unregistered visitors.
IDENTIFICATION PARAMETER SETTINGS

8HOWARD INTERACTIVE KIOSK INSTALLATION GUIDE
Set the startup items of the application—start up automatically by default, normal without changing.
AUTO START
Automatically start the application after powering up.
APPLICATION DAEMON
Conrm whether the application is in priority working state within the cycle. If not, the application will be
opened automatically.
APPLICATION THREAD DAEMON
The application will take priority in system memory.
APPLICATION INFORMATION SETTINGS
You can choose to hide or display. If you choose to hide, the application information will not be displayed
in the temperature measurement interface, and if you choose to display, the application information will be
displayed in the application test interface.
Startup settings interface
START UP SETTINGS
Application
information

FOR SUPPORT CALL: (888) 323 - 3151 9
RELAY SETTINGS
Optional modes and Settings after connecting external relays
MODE 0
Un-automatically close mode, the relay will not automatically close after opening.
MODE 1
High efciency, auto-close mode, the relay will automatically close after opening.
MODE 2
Low efciency, auto-close mode, the relay will automatically close after opening.
DELAY
The response time of auto-close shutdown is delayed close.
OTHER SETTINGS
Temperature module rmware can be upgraded in this interface.
Setting callback, setting URL, IP and port number.(Connected to LAN)
APPLICATION INITIALIZATION
Clear device registration information, face database, trafc records, and application settings to restore to
the original state.
Startup settings interface

10 HOWARD INTERACTIVE KIOSK INSTALLATION GUIDE
FACE DATA ENTRY
Take the initiative to input personnel face data as a comparison basis for face recognition. The corresponding
generated image data is stored locally in the Android system explorer. The specic path is: Internal Memory /
viplmg
FACE DATABASE
This option is used to manage face database information and can be used to add and delete face data.

FOR SUPPORT CALL: (888) 323 - 3151 11
PASS RECORD
MIPS will automatically record all visitors, generate a picture le, and store it locally in the Android system
explorer. The specic path is: Internal Memory / currentlmg
This data can be exported to external storage via USB.
APPLICATION INFORMATION
This option displays application information for viewing.

12 HOWARD INTERACTIVE KIOSK INSTALLATION GUIDE
CONTACT INFORMATION
If you have any questions about our line of technology partner products, feel free to contact us for
more information.
General Information
Toll Free: 1.888.912.3151
Customer Support
Toll Free: 1.888.323.3151
Technical Support
We provide FREE telephone technical support
24/7 (excluding US holidays) for as long as
you own your Howard product. Our friendly,
US-based team of experts will answer your
questions about the product, hardware setup,
or installation, and with telephone hold times of
typically less than 1 minute!
For technical support call 888.323.3151