HP Compaq Presario Manual

If your computer goes into Standby mode, the
connection to SBC DSL may be lost. You must
restart your computer to reenable the DSL
connection. To ensure the DSL connection
remains stable, we recommend that you disable
the standby mode of your computer by going into
the Power Management area of Control Panel and
disabling Standby.
1. Select Start / Settings / Control Panel.
2. Double-click on the Power Management AIcon.
3. Click on Power Schemes.
4. Select the Always On option.
5. Click OK.
NOTICE
The information in this card is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR EDI-
TORIAL ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CON-
SEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR
USE OF THIS MATERIAL.
This card contains information protected by copyright. No part of this card may be photocopied or
reproduced in any form without prior written consent from Compaq Computer Corporation.
©2000 Compaq Computer Corporation. All rights reserved.
Compaq is registered with the U.S. Patent and Trademark Office.
Product names mentioned herein are trademarks and/or registered trademarks
of their respective companies.
Printed in the U.S.A., Brazil, Canada, Japan, Korea, Singapore, Taiwan, and the U.K.
Second Edition, July 2000
212406-002