HP Compaq Presario User manual

Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 1 of 14 Printed: 03/12/03 10:49 AM
Compaq Presario
Easy Access Wireless Keyboard,
Mouse and Receiver
Installation Guide
Trådlöst Easy Access-tangentbord,
mus och mottagare
Installationsguide

Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 2 of 14 Printed: 03/12/03 10:49 AM

Easy Access Wireless Keyboard, Mouse and Receiver 1
Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 1 of 14 Printed: 03/12/03 10:49 AM
English
Introduction
Ensure you have the following contents in your
wireless keyboard and mouse accessory kit.
■ Wireless Keyboard
■ Wireless Optical Mouse
■ Receiver with a USB cable
■ Four (4) AA alkaline batteries
■ This user documentation.
Easy Access Wireless
Keyboard, Mouse and Receiver

2Easy Access Wireless Keyboard, Mouse and Receiver
Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 2 of 14 Printed: 03/12/03 10:49 AM
Installing the Keyboard and Mouse
Install the batteries in the keyboard and mouse. Your wireless device uses AA Alkaline batteries.
Note: Follow the indicators in the battery compartment for proper battery placement in the keyboard and mouse.

Easy Access Wireless Keyboard, Mouse and Receiver 3
Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 3 of 14 Printed: 03/12/03 10:49 AM
English
Setting Up the
Wireless Devices
1 Connect the receiver to the USB port on your
computer.
A
2 Turn on the computer. The computer must be
on when you change the ID settings by
pressing the Connect button.
3 Press the Connect button Aon the receiver.
The status light on the receiver will flash for a
few seconds when the Connect button is
pressed.
4 While the status light is flashing, press the
Connect button Bon the keyboard.
B
5 Press the Connect button Aon the receiver.
The status light on the receiver will flash for a
few seconds when the Connect button is
pressed.

4Easy Access Wireless Keyboard, Mouse and Receiver
Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 4 of 14 Printed: 03/12/03 10:49 AM
6 Press the Connect button Con the mouse when
the status light on the receiver begins to flash.
C
Installing the
Latest Software
You can download the latest software program
for your wireless receiver to have additional
features such as the onscreen low-battery
indicator and key-lock indicators.
To download this program:
1 Open your Internet browser and type in the
following URL:
http://www2.hp.se/country/se/swe/
support.html
2 Select the link for drivers under compaq
support & service.
3 Select Presario Desktops.
4 Select the series number of your PC from the
Series drop-down list. This number is based on
the model number that appears on your PC.

Easy Access Wireless Keyboard, Mouse and Receiver 5
Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 5 of 14 Printed: 03/12/03 10:49 AM
English
5 Select your model number from the
Model/Processor drop-down list.
6 Select your operating system from the
Operating System drop-down list.
7 Click Search.
8 Scroll down to find the Presario Wireless
keyboard - Num, Caps, and Scroll-Lock status
indicator software file, and then click View
Details & Download.
9 Click Download.
10 Select Save this program to disk, and
then click OK.
11 Save the file to your desktop, and then close
your Internet browser window.
12 Double-click the Presario Wireless keyboard -
Num, Caps, and Scroll-Lock status indicator
software file, and then follow the onscreen
instructions.
Troubleshooting
When the wireless devices are activated, each
wireless device should have a different ID to
avoid conflict. This wireless set has 2 channels
and 256 IDs.
If there is more than one set of wireless devices
being used within two meters of each other and
you are experiencing interference issues with
your wireless keyboard or mouse, do the
following:
1 Change the channel.
a Press the Connect button on the wireless
keyboard or mouse. The channel of the
keyboard or mouse will be changed.
2 Confirm that each device has a unique ID.
a Press the Connect button on the receiver. A
status light will flash.
b Press and hold the Connect button on the
wireless keyboard or mouse for three
seconds, then release.

6Easy Access Wireless Keyboard, Mouse and Receiver
Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 6 of 14 Printed: 03/12/03 10:49 AM

Trådlöst Easy Access-tangentbord, mus och mottagare 7
Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 7 of 14 Printed: 03/12/03 10:49 AM
Svenska
Inledning
Kontrollera att tillbehörspaketet innehåller
följande.
■ Trådlöst tangentbord
■ Trådlös optisk mus
■ Mottagare med USB-kabel
■ Fyra (4) alkaliska AA-batterier
■ Den här dokumentationen.
Trådlöst Easy Access-
tangentbord, mus och mottagare

8Trådlöst Easy Access-tangentbord, mus och mottagare
Filename: sa3adwch_EngSwe.doc Title: Self Cover [complete version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 15 Page: 8 of 14 Printed: 03/12/03 10:49 AM
Installera tangentbordet och musen
Sätt i batterierna i tangentbordet och musen. Den trådlösa enheten kräver alkaliska AA-batterier.
Obs! Följ bilderna i batterifacken för att sätta i batterierna i tangentbordet och musen på rätt sätt.