HP ENVY Installation instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP Envy All-in-One PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
Motherboard, speaker
2
Batteries
All types including standard alkaline and lithium coin
or button style batteries RTC battery & AA Alkaline
battery of KB & Mouse
5
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps LCD
1
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
power cord
1
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
Components and waste containing asbestos
Components, parts and materials containing

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Description #1 Screwdiver
TORX T8
Description #2
Description #3
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Removed Rear Cover
2. Removed Stand base assay
3. Removed Converter board
4. Removed SO-Dimms
5. Removed ODD module
6. Remove HDD module
7. Removed MB Shielding
8. Removed Thermal module
9. Removed Fan module
10. Removed MB
11. Removed Speaker module
12. Removed Low case module
13. Removed LCD panel
14. Removed Keyboard Battery
15. Remover Mouse Battery
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
1. Removed Rear Cover 2. Removed Stand base assay
3. Removed Converter board & others 4. Removed SO-Dimms
5. Removed ODD module 6. Remove HDD module
7. Removed MB Shielding

EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
8. Removed Thermal module 9. Removed Fan module
10. Removed MB 11. Removed Speaker module
12. Removed Low case module 13. Removed LCD panel

EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
14. Removed Keyboard Battery 15. Remover Mouse Battery