HP Pavilion21 TouchSmart All-in-One Installation instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP Pavilion21 TouchSmart All-in-One PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
Part22,Part62,Part67,Part75,Part90,Part108,Part118
7
Batteries
All types including standard alkaline and lithium coin
or button style batteries
Part29(CR2032),Part87(AAA),Part98(AA)
5
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps Part43 (LED displays,no lamps)
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Part119(Electrolytic Capacitor)
1
External electrical cables and cords
Part112(Adapter Cable),Part120(Power Coard)
2
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
0

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver, Lever, Star Screwdriver(six)
NA
Slanted Pliers, Pliers
NA
Hammer
NA
Knife
NA
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. AIO PC
2. LCD
3. Thermal Fan
4. ODD
5. HDD
6. Keyboard
7. Mouse
8. Power Adapter and Cable
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
1
Metal piece
Metal
1
Snap,
Adhesive,
Screw
Screwdriver,
Lever,
Slanted pliers,
Knife
84
2
Screw
Metal
9
3
Metal plank
Metal
178

EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
4
Conductive
Anti-Static Foam
Mix
1
5
Plastic piece
Plastic
4
6
Metal plank
Metal
370
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
7
Plastic piece
Plastic
19
8
Metal piece
Metal
107
9
Metal plank
Metal
51
10
Plastic case
Plastic
74
11
Nut
Metal
1
12
Plastic case
Plastic
596

EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
13
Label
Plastic
1

EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
14
Screw
Metal
39
Plug, Solder,
Snap,
Adhesive,
Screw
Screwdriver,
Lever, Knife
197
15
Metal piece
Metal
1
16
Spring
Metal
1
17
Speaker
Mix
148
18
Conductive
Anti-Static Foam
Mix
2
19
Plastic sheet
Plastic
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
20
Label
Plastic
1
Part 22 is a
PCBA. The
surface of
part 22 is
greater than
21
Metal case
Metal
507

EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01
22
PCBA
PCBA
316
10 square
centimeters.
According to
WEEE
(recast)
directive, part
22 requires
selective
treatment.
23
Metal piece
Metal
108
24
Plastic ring
Plastic
1
25
Plastic piece
Plastic
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
26
Wire
Cable/wir
e
50
Part 29 is a
battery.
According to
WEEE
(recast)
directive, part
29 requires
selective
treatment.
27
Metal plank
Metal
127
28
Plastic pad
Plastic
2
29
Cell battery
Battery
3
30
Plastic pad
Plastic
4

EL-MF877-00 Page 7
Template Revision B
PSG instructions for this template are available at EL-MF877-01
31
Metal frame
Metal
216
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
32
FPC
Cable/wir
e
2

EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
C
33
Screw
Metal
12
Adhesive,
Screw
Lever,
Slanted pliers,
Knife
71
34
Plastic pad
Plastic
4
35
Plastic pad
Plastic
1
36
PCBA
PCBA
1
37
PCBA
PCBA
1
38
Metal piece
Metal
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)

EL-MF877-00 Page 9
Template Revision B
PSG instructions for this template are available at EL-MF877-01
C
39
Nut
Metal
3
Part 43 is a
LCD.
According to,
The surface
of part 43 is
greater than
100 square
centimeters.
According to
WEEE
(recast)
directive, part
43 requires
selective
treatment.
40
Metal piece
Metal
73
41
Metal plank
Metal
1419
42
Plastic frame
Plastic
227
43
LCD
LCD
3069
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
44
Screw
Metal
1
Solder,
Adhesive,
Screwdriver,
Lever,
24

EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01
45
Label
Plastic
1
Screw
Slanted pliers,
Hammer,
Knife
46
Textile
Mix
1
47
Metal plank
Metal
28
48
Wire
Cable/wir
e
1
49
PCBA
PCBA
14
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
50
Plastic case
Plastic
28
51
Metal ring
Metal
3
52
Plastic ring
Plastic
5
53
Plastic piece
Plastic
8

EL-MF877-00 Page 11
Template Revision B
PSG instructions for this template are available at EL-MF877-01
54
Metal piece
Metal
2
55
Metal piece
Metal
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
56
Metal piece
Metal
1

EL-MF877-00 Page 12
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
E
57
Screw
Metal
1
Plug, Solder,
Snap,
Adhesive,
Screw
Screwdriver,
Star Screwdriver (six),
Slanted pliers,
Knife
105
Part 62is a
PCBA. The
surface of
part 62 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
62 requires
selective
treatment.
58
Spring
Metal
1
59
Label
Plastic
1
60
Plastic piece
Plastic
1
61
Metal piece
Metal
62
PCBA
PCBA
7
Procedure
Part
Disassembly
Remark

EL-MF877-00 Page 13
Template Revision B
PSG instructions for this template are available at EL-MF877-01
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
E
63
FPC
Cable/wir
e
1
Part 67 is a
PCBA. The
surface of
part 67 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
67 requires
selective
treatment.
64
Metal case
Metal
56
65
Metal piece
Metal
14
66
Electronic
component
Mix
12
67
FPCA
PCBA
8
68
Electronic
component
Mix
5
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
E
69
Plastic case
Plastic
43

EL-MF877-00 Page 14
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
F
70
Screw
Metal
6
Adhesive,
Screw
Lever,
Star Screwdriver (six),
Knife
96
Part 75 is a
PCBA. The
surface of
part 75 is
greater than
71
Label
Plastic
1

EL-MF877-00 Page 15
Template Revision B
PSG instructions for this template are available at EL-MF877-01
72
Textile
Mix
1
10 square
centimeters.
According to
WEEE
(recast)
directive, part
75 requires
selective
treatment.
73
Sponge
Plastic
1
74
Plastic piece
Plastic
1
75
PCBA
PCBA
16
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
F
76
Metal plank
Metal
60
77
Connector
Mix
1
78
Metal piece
Metal
3
79
Metal plank
Metal
28
80
Metal case
Metal
252

EL-MF877-00 Page 16
Template Revision B
PSG instructions for this template are available at EL-MF877-01
81
Metal plank
Metal
23
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
F
82
FPCA
PCBA
12

EL-MF877-00 Page 17
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
G
83
Metal piece
Metal
0.07
Plug, Snap,
Adhesive,
Screw
Screwdriver,
Lever, Knife
139
Part 87 is a
battery.
According to
WEEE
(recast)
directive, part
87 requires
selective
treatment.
84
Plastic pad
Plastic
2.67
85
Screw
Metal
9.4
86
Battery cover
Plastic
2.93
87
Battery
Battery
23.44
88
Metal piece
Metal
4.55
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)

EL-MF877-00 Page 18
Template Revision B
PSG instructions for this template are available at EL-MF877-01
G
89
Wire
Cable/wir
e
1.54
Part 90 is a
PCBA. The
surface of
part 90 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
90 requires
selective
treatment.
90
PCBA
PCBA
9.26
91
Plastic piece
Plastic
0.84
92
Plastic piece
Plastic
0.46
93
Plastic pad
Plastic
18.87
94
Plastic sheet
Plastic
14.5
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
G
95
Keypa Keypadd
Plastic
490.4

EL-MF877-00 Page 19
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
H
96
Plastic piece
Plastic
2.51
Adhesive,
Seal, Screw
Screwdriver,
Knife
29
Part 98 is a
battery.
According to
WEEE
(recast)
directive, part
98 requires
97
Screw
Metal
0.78
98
Battery
Battery
47.73

EL-MF877-00 Page 20
Template Revision B
PSG instructions for this template are available at EL-MF877-01
99
Plastic piece
Plastic
0.09
selective
treatment.
100
Plastic case
Plastic
50.04
101
Plastic piece
Plastic
0.38
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
H
102
Plastic piece
Plastic
0.14
103
Plastic piece
Plastic
0.07
104
Plastic piece
Plastic
1.41
105
Spring
Metal
0.47
106
Plastic ring
Plastic
1.21
107
Label
Plastic
0.02