HP Media Center m500 - Desktop PC User manual

m500
Moto Cam
User Manual

1
This product is designed with waterproof. However, it is forbidden to
use a strong jet of water to rinse or flush the product. The warranty
will be invalid if the damage is caused by this reason.

2
Contents
About this Guide ................................................................................................ 3
Regulatory notices............................................................................................. 3
Prohibition of co-location.................................................................................. 3
WEEE Notice....................................................................................................... 3
CE Regulatory Notice ......................................................................................... 3
Notes on Installation ......................................................................................... 3
1Introduction ......................................................................................6
1.1 Feature................................................................................................... 6
1.2 Package Contents .................................................................................. 6
1.3 Product Overview................................................................................... 7
1.3.1 Host…………………….. ...................................................................7
1.3.2 Easy Pad......................................................................................7
1.4 Getting Started ...................................................................................... 8
1.4.1 Insert the Memory Card ..............................................................8
1.4.2 Remove the Memory Card...........................................................8
1.5 Installation............................................................................................. 9
1.5.1 Connect host and accessories.....................................................9
1.5.2 Installation position..................................................................10
1.5.3 Install power cable....................................................................11
1.5.4 Install front cam on rear-view-mirror.......................................11
1.5.5 Adjust view angle, calibrate and format ...................................14
2Setting............................................................................................15
2.1 Download Go Moto Plus app ................................................................ 15
2.2 Wi-Fi Connection.................................................................................. 15
2.3 Use Go Moto Plus app .......................................................................... 16
3SuperCar 2.0....................................................................................25
4Specification...................................................................................26

3
About this Guide
The content in this document is for information purpose and is subject to change
without prior notice. We have made every effort to ensure that this User Guide is
accurate and complete.
However, no liability is assumed for any errors or omissions that may have
occurred.
The manufacturer reserves the right to change the technical specifications or
accessories without prior notice.
Regulatory notices
This document provides country- and region-specific non-wireless and wireless
regulatory notices and compliance information for your product. Some of these
notices may not apply to your product.
Prohibition of co-location
This device and its antenna(s) must not be co-located or operated in conjunction
with any other antenna or transmitter.
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery by users
in private households in the European Union
This symbol on the product or on the packaging indicates that this
cannot be disposed of as a household waste. You must dispose of
your waste equipment and/or battery by handling it over to the
applicable take-back scheme for the recycling of electrical and
electronic equipment and/or battery. For more information about
recycling of this equipment and/or battery, please contact your city
office, the shop where you purchased the equipment or your
household waste disposal service. The recycling of materials will
help to conserve natural resources and ensure that it is recycled in a
manner that protects human health and environment.
CE Regulatory Notice
The product herewith complies with the requirements of IEC 62368-1:2014, the
EMC Directive 2014/30/EU, the RED-Directive 2014/53/EU and the RoHS Directive
2011/65/EU.
EU Health Protection: This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Notes on Installation
1. Keep the wire and host mounted away from the high-voltage ignition coil.
2. Do not bend the wires and connectors severely while installation.
3. Do not touch the lens with your fingers. Finger grease may be left on the lens
and will result in unclear videos or pictures. Clean the lens on a regular basis.

4
4. Use the attached power cable and wires for installation only. Please do not
use other brand of power cable or wires to avoid equipment burn or
explosion.
5. Please seek for professional shops and technicians for installation.
Caution
Due to local laws and vehicles safety considerations, do not operate the
camcorder while driving.
Set up time zone, time and date accurately before you use this camcorder.
Please use SuperCar software under the condition that Electronic Map are
functioning normally.
The firmware function in the camcorder is for reference only, drivers are
advised to exercise discretion based on actual road conditions.
The results of GPS positioning are only for reference, and should not affect
the actual driving situation. The camcorder also cannot ensure the
positioning accuracy.
GPS positioning accuracy may differ depending on weather and location
such as high buildings, tunnels, undergrounds, or forests. GPS satellite
signals cannot pass through solid materials (except glass). Tinted window
will also affect the performance of the GPS satellite reception.
GPS reception performance on each camcorder may differ. The camcorder
cannot determine the accuracy of the positioning results from different
hardware.
The values displayed in this camcorder, such as speed and position, may
be inaccurate due to the influence of surrounding environment. They are for
your reference only.
This product is used only for non-commercial use, within the maximum
limits permitted by applicable law. We do not take any responsibilities for
the loss of use of the product.
This camcorder gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of the
product or its accessories and void the warranty.
Wi-Fi Signals are unable to pass through the building. The limit of signal
transmission is 5m.
Wi-Fi Operation Channel: Ch1~Ch13
The product employs wireless data communication which may interfere, or
be interfered by, a near-by camcorder.
Never use this camcorder in the vicinity of a microwave oven or at places
where there is radio interference.
Radio wave reception may be worsened in specific environments.
Please be advised that if another camcorder is also using the same 2.4GHz
band as this product, the processing speed of both camcorders may slow
down.
This product gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of the
product or its accessories and void the warranty.
The radio frequency (RF) generated by this RF electronic camcorder may
cause adverse effects on the operation of other electronic camcorders and

5
result in malfunctioning. Wireless transmitters and circuitry may also
interfere with other electronic camcorders. Therefore, do observe the
following precautions:
Aircraft: Never use a radio transmitter when you are in an airplane.
Please switch off the Wi-Fi function of the camcorder.
Vehicle: The radio frequency transmitted by this camcorder may affect
the electronic system in a motorized vehicle. Please consult the
manufacturer or dealer of your vehicle on the possible effect.
Pacemaker: In order to prevent any potential interference to a
pacemaker, anyone who uses a pacemaker should be advised, that,
when using this camcorder, a minimum distance of 15cm (6 inch)
should be kept between the camcorder and the pacemaker; and never
put this camcorder in a chest pocket. In case of any doubt of
interference, switch off the camcorder immediately.
Medical Camcorder: If you use a personal medical camcorder, consult
the camcorder manufacturer or your physician to confirm if your
camcorder is sufficiently shielded from the RF transmission of this
camcorder.
Medical Facilities: Hospitals and medical institutes may use facilities
that are sensitive to an external RF energy. Observe such instructions
when the medical care personnel or any posted sign requests you to
switch off any camcorder that may interfere the radio frequency.
Explosion sites or any location with a posted sign: In order to prevent
interfering with an explosion activity, observe all the signage and
instructions in the Explosion Area or in a zone with a “Switch Off 2-way
Radios” sign by switching off camcorders that may interfere with the
radio frequency.
HP Inc. is NOT responsible for the loss of any data/content during operation.
Product application disclaimer
Please scan the QR code below and read the product application disclaimer
carefully.
When you start using the system, it is assumed that you agree to
the above statement.

6
1Introduction
Thank you for purchasing this advanced Moto Cam. This product is specifically
designed for real time video recording when riding scooter.
1.1 Feature
Intelligent Noise Reduce, suppress surrounding noise efficiently
Dual waterproof camera, super high resolution
2MP sensor
Wi-Fi and friendly app
Host and accessories all waterproof
Hot key to lock the file
Freely position GPS in any better reception(GPS is optional)
Collison and topple-over detection, auto emergency recording
1.2 Package Contents
The package contains the following items. In case there is any missing or
damaged item, contact your dealer immediately.
Host
Front/rear camera
GPS(optional)
Easy Pad
Power cable
Installation Kit

7
1.3 Product Overview
1.3.1 Host
編號
名稱
編號
名稱
1
Reset
5
Green: to connect GPS(optional)
2
microSD slot
6
Blue: to connect rear camera
3
5in1 connector
7
Yellow: to connect Easy Pad
4
Red: to connect power cable
8
Black: to connect front camera
1.3.2 Easy Pad
No
Item
Function
1
LED indicator -
front camera
-LED always on: power on (standby)
-LED flash: front camera is in recording
-LED flash quickly: speed cam alert. *Note
2
LED indicator –
rear camera
-LED always on: power on (standby)
-LED flash: rear camera is in recording
3
Microphone
For Intelligent Noise Reduce
4
Lock file / Wi-Fi
-short press: to lock the file
-long press: turn on Wi-Fi

8
Note:
1. The speed cam alert function must have the speed cam mapdatum of the country or region built into the GPS
of the device. If there is no built-in map datum, this function will not work. If GPS is notinstalled, this function
has no effect either. The speed cam alert function is for reference only, and it’s not guaranteed to cover all
speed cam spots on the driving route. Please make own judgments based on actualroad conditions while
driving.
2. The speed cam map datum depending on shipping area. Please contact distributor whether if it’s built-in or not
for your area.
1.4 Getting Started
1.4.1 Insert the Memory Card
Insert memory card with the gold pins facing forward, and the nameplate of the host is
toward up, see the picture as below,
1.4.2 Remove the Memory Card
Turn off the scooter’s engine, and the camera will power off accordingly. Once the camera is
completely powered off, you can remove the memory card from memory slot.
Note:
1. Don’t remove or insert the memory card while the camera is in working status. This may damage the memory
card or cause data lose.
2. Support microSD card speed V30 or higher and capacity 16GB or greater. (support up to 128GB)
3. Please use Go Moto Plusapp to format the memory card and sync the date and time before the initial use.
4. Please regularly formatmemory card and sync date/time. (Recommend once a month)

9
1.5 Installation
Below installation is for reference only. Please contact professional shops and
technician for installation.
1.5.1 Connect host and accessories
Connect host with power cable, front camera, rear camera, GPS and easy pad
according to connector’s colors.

10
1.5.2 Installation position
No
Item
Installation position
1
Front camera
To be fixed on scooter’s head or the central of front case.
Or use rear-view-mirror mount and fix it on the scooter’s
rear-view-mirror.
2
Easy pad
To be fixed on the front handle. (refer to above drawing)
DO NOT put the Microphone toward to front end.
3
GPS(optional)
To be fixed on a good reception of front handle..
4
Rear camera
To be fixed on the car plate or rear handle.
5
Installation
Use Installation Kit to mount the host, accessories and wires.
Refer to above image and the wiring route to install all items.
6
Host and
wires
Put and fix the host and accessories’ wires in the cabinet. Use
Velcro to fix the host on the inner side of cabinet; it’s
Convenient to remove the host and take out memory card to
check.
*When installation is completed, use Go Moto Plus app to
calibrate topple-over detection. (Tilt Detection).

11
1.5.3 Install power cable
1.5.4 Install front cam on rear-view-mirror
1. Dissemble the original mount from the camera.

12
2. Temporarily take out the metal ring and put the Anti-slippery Sticker on the gutter of the
camera. Then, peel off the transparent film. Put on metal ring once again.
3. Insert A of the Mount in the middle of metal ring, and confirm the white mark on camera is
always positioned up. This is to make sure the capture image is in correct angle. Use screw
driver to fix to the Mount.
4. Take out the rear-view-mirror from the motorcycle. Insert Bof the Mount into the bar of
rear-view-mirror.

13
5. Put the whole set of rear-view-mirror back to motorcycle and fix it steadily.
It’s highly recommended to install the Rear-view-mirror Mount on the right side of the
motorcycle. If install on the left side, refer to below image for installation rendering.

14
1.5.5 Adjust view angle, calibrate and format
Use Go Moto Plus app to adjust the view angle.
After adjusting your viewing angle, tap in the Go Moto Plus app to enter “Camera
Setting”. On first use, be sure to calibrate “Tilt Sensor” and “Format”microSD card.
Calibrate the Tilt Sensor:
Hold your motorcycle upright, straight and still as possible, then tap on “Tilt Sensor”
in the menu so the Main Unit can calibrate the internal tilt sensor. After the calibration
is completed, if the camera detects that the motorcycle is toppled over, it will trigger
emergency recording automatically. This is indicated by the blue LED going from a slow
flash to a rapid flash. Emergency recordings are stored in the emergency video folder.
When the Folder is full, app will pop-up message of “Emergency video files will be
overwritten by loop recording. Backup important files.”. Regularly check the recorded
files and backup if needed.
*The auto detection of emergency recording can be turned on or off from Camera
Setting.
Format microSD card:
Tap “Format” in the menu to format microSD card. It is recommended to format
your card at least once a month to ensure that it is working properly. Make sure backup
important files before formatting.

15
2Setting
2.1 Download Go Moto Plus app
The Moto Cam allows you to connect to the smart phone to preview, set-up
camera, synchronize date/time and calibrate topple-over detection. When using
the Moto Cam for the first time, download and install [Go Moto Plus ] app from
your smart phone.
1. Download Go Moto Plus application from Google Play Store or
Apple App Store.
2. Complete the installation.
2.2 Wi-Fi Connection
1. Press the button on Easy Pad for 3 seconds to turn on Wi-Fi.
2. Using the Wi-Fi function of your smart phone, search for the Moto Cam ID
“hp_m500_123456” from the list (last 6 numbers are system random
numbers). Enter default password 12345678 to connect with Moto Cam.
3. Use downloaded app Go Moto Plus to start setting or operating other
functions.
Note:
1. Wi-Fi is default ON for 3 minutes when power on. If there is no connection with app within 3 minutes, Wi-Fi will
be turned off automatically. To turn on again Wi-Fi, long press Easy Pad button for 3 seconds.
2. The smart phone shall be within a maximum of a 5m distance from the host without any buildingsin between.
3. The language of the [Go Moto Plus]app will be consistent with your smart phone, beyond the language
options, the App will be activated with default language.
APP layout and features may be changed subject to different software versions. Please refer to
Google Play or APP Store for update.

16
2.3 Use Go Moto Plus app
Tap [Go Moto Plus] icon to activate the application. The main screen will pop
up. Follow the below instruction to operate this application.

17
2.3.1 Camera preview, record, snapshot
You can use this feature to preview, record or take snapshot.
icon
Description
/
Go Moto Plus logo / memory card message
Preview
Switch front and rear camcorder preview
180 ゜Rotate the preview angle

18
Note:
1. The App will auto sync the camera's date/time with your smartphone.
2. App layout and features are subject to change, depending on the software version. Refer to
the Google Play Store or iOS App Store for the latest updates.
3. Android phones please download Google Offline Maps first. First, update Google Maps to
the latest version, open the Google Maps app, click on the user account picture above, and
click "Offline Area", select "Custom Area", select the area where you want to download the
offline map, confirm and press "Download".
Full screen display
/
Start/Stop Record
Snapshot
Camera File. Recorded files in microSD card.
Camera Setting
Note: The emergency videos folder in microSD
reaches capacity, and will be overwritten by new
recordings. Please back up important files. This
message icon will eliminate after backup.
Map and riding track

19
2.3.2 Playback, delete, download
You can use this feature to playback or delete the file saved in camcorder, or to
download the file from camcorder to your mobile device.
1. Touch the icon [Camera File].
2. The files saved in the camcorder will be displayed on your smart phone.
Camcorder will stop recording for a few seconds until your smart phone
finishes reading the saved files from camcorder. There are three folders, Loop,
Snapshot and Locked. The “F” and “R” letter at the right bottom corner of
preview thumbnail stands for “Front camera” and “Rear camera”. Tap the
preview thumbnail to playback the file.