HP HP EliteBook x360 1020 G2 Assembly instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Notebooks and Tablet PCs
Marketing Name / Model
[List multiple models if applicable.]
HP EliteBook x360 1020 G2 Notebook PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
3
Batteries
All types including standard alkaline and lithium coin
or button style batteries
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
0
External electrical cables and cords
0
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Screwdriver #1
Electric torx
screw
driver(T5)
Sucker #2
Sucker
Screwdriver #3
Electric torx
screw
driver(#1)
Screwdriver #4
Electric torx
screw
driver(#0)
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Follow steps described in Disassembly instruction (file attached)
2. If parts can be removed without using a tool, remove it first
3. Use correct screwdriver and torque value before unlock the screw.
4.
5.
6.
7.
8.
9.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MANUFACTURING PROCESS INSTRUCTIONS
MECHANICAL ASSEMBLY
MODEL : Eastwood
Auditor ：Tabulator：
Tzan.uen-tung
Tzan.uen-tung

Step：
Standard Operation Procedure
Document No. Autobot FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Tzan.uen-tung NPSU-PPE
Auditor ：
Tzan.uen-tung
Loosen BTCB screw s
1. Loosen BTCB screw s*5
2. Use Sucker Disassemble BTCB
1(1/1)
Electric torx screw driver(T5) 1
Sucker 1
Fig.2
3
4
2
1
1
Fig.1
2017/7/22
1.00

Step：
Standard Operation Procedure
Document No. Autobot FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Tzan.uen-tung NPSU-PPE
Auditor ：
Tzan.uen-tung
1.Disassemble battery cable CNTR
2.Loosen SSD screw *1 , Disassemble SSD.
3.Loosen Battery screw *6, Disassemble Battery.
2(1/1)
Disassemble battery & SSD
Fig.1
Fig.2
4
5
1 2
6
3
Fig.3
2017/7/22
1.00
Electric torx screw driver(#1) 1

Step：
Standard Operation Procedure
Document No. Autobot FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Tzan.uen-tung NPSU-PPE
Auditor ：
Tzan.uen-tung
1. Disassemble volume FPC&FP FPC
2. Disassemble speaker CNTR(Fig.2)
3. Disassemble audio FFC (Fig.3)
4. Disassemble clickpad FFC(Fig.4/Fig.5)
3(1/2)
Disassemble FPC/FFC,CNTR
Fig.1
2,Volume CNTR 1.FPR CNTR
Fig.
2
Fig.3
Audio CNTR
2017/7/22
1.00

Step：
Standard Operation Procedure
Document No. Autobot FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Tzan.uen-tung NPSU-PPE
Auditor ：
Tzan.uen-tung
3(2/2)
Fig.4
Click pad FFC CNTR
Clickpad FFC CNTR
Fig.5
Disassemble FPC/FFC,CNTR 2017/7/22
1.00

Step：
Standard Operation Procedure
Document No. Autobot FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Tzan.uen-tung NPSU-PPE
Auditor ：
Tzan.uen-tung
1. Disassemble NFC FFC & antenna Fig.1/Fig.2
2. Disassemble NFC Antenna& Camera cable,Fig.3
4(1/1)
Disassemble NFC/camera cable
NFC antenna
Fig.2
Fig.1
MB CNTR
Fig.3
WLAN connector
Camera cable CNTR
2017/7/22
1.00

Step：
Standard Operation Procedure
Document No. Autobot FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Tzan.uen-tung NPSU-PPE
Auditor ：
Tzan.uen-tung
1. DIS thermal sensor cable &speaker
cable,Fig.1
2. DIS LVDS cable,Fig.2
3. DIS KB FFC & BL FPC,Fig.3/Fig.4
5(1/1)
DIS LVDS/speaker/thermal&KB/BLcable
Fig.1
Fig.2
Speaker CNTR
Thermal sensor CNTR
LVDS cable CNTR
Fig.
3
Fig.
4
KB FFC CNTR
BL CNTR
2017/7/22
1.00

Step：
Standard Operation Procedure
Document No. Autobot FA DIS ASS’Y SOP Station :
Name : Ver. : Date :
Notes : If finding anything uncommon, notice foreman or assistant at once.
Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty
Tabulator：Issue department：
Tzan.uen-tung NPSU-PPE
Auditor ：
Tzan.uen-tung
1. Loosen M/B Screw * 5 , Dissemble MB,Fig.1
2. Dissemble power button sponge, Disassemble power button,Fig.2
3. Dissemble volume board& volume button,Fig.3
6(1/1)
Electric torx screw driver(#1) 1
DIS MB & power button/volume button
1
2
3
5
Fig.1
4
Fig.2
sponge
Power button
Fig.3
Volume button
Volume board
2017/7/22
1.00