HP OmniBook 7100 User manual

1
HP OmniBook 7100
User’s Handbook
HP OMNIBOOK 7100 USER’S HANDBOOK............................................4
Using This Online Handbook....................................................................................................4
Finding More Information........................................................................................................4
Notice.........................................................................................................................................5
1. INTRODUCING THE OMNIBOOK ........................................................6
Identifying the Parts of the OmniBook.....................................................................................6
Learning About Windows .........................................................................................................8
Safety Information.....................................................................................................................8
Working in Comfort..................................................................................................................9
2. OPERATING THE OMNIBOOK ..........................................................10
Powering the OmniBook.........................................................................................................10
To connect ac power..............................................................................................................10
Starting and Stopping the OmniBook.....................................................................................10
To start and stop the OmniBook ............................................................................................11
To reset the OmniBook..........................................................................................................12
To transport the OmniBook...................................................................................................12
Using the OmniBook Pointing Devices ...................................................................................12
To use the built-in pointing devices .......................................................................................13
To activate full touch pad capabilities....................................................................................14
To activate full pointing stick capabilities..............................................................................14
To configure pointing devices................................................................................................15
Using the OmniBook Display..................................................................................................15
To adjust the display..............................................................................................................15
To extend the life of the display.............................................................................................15
Adjusting the Sound System....................................................................................................16
To adjust the volume manually..............................................................................................16
To adjust the volume in Windows..........................................................................................16
Using the OmniBook Keyboard..............................................................................................16
To use the Fn hot keys...........................................................................................................17
To use the Windows keys.......................................................................................................17
To use the embedded keypad .................................................................................................17

2
To use the Alt Gr key ............................................................................................................18
Checking the Status of the OmniBook....................................................................................18
To interpret the status lights..................................................................................................18
To interpret the status panel indicators ..................................................................................19
Protecting the OmniBook........................................................................................................20
To set or change a password..................................................................................................20
To delete a password .............................................................................................................21
To attach a security cable.......................................................................................................21
To install McAfee VirusScan.................................................................................................22
3. MANAGING BATTERY POWER......................................................... 23
Recharging and Replacing Batteries......................................................................................23
To respond to a low-battery warning......................................................................................23
To recharge the battery..........................................................................................................24
To replace the battery ............................................................................................................24
Conserving Battery Power......................................................................................................25
To optimize battery operating time ........................................................................................25
To get the most from your batteries........................................................................................26
To change a time-out setting..................................................................................................26
4. MAKING CONNECTIONS...................................................................28
Using Plug-In Modules and Storage Media............................................................................28
To replace a plug-in module..................................................................................................28
To insert or eject a floppy disk...............................................................................................29
To insert or remove a CD ......................................................................................................29
Connecting External Devices ..................................................................................................30
To connect an external monitor .............................................................................................30
To connect a printer or other parallel device..........................................................................31
To connect a serial mouse or other serial device.....................................................................32
To connect an external PS/2 keyboard or a PS/2 mouse .........................................................32
To connect a universal serial bus device.................................................................................33
To connect an audio source, a microphone, or headphones ....................................................34
To connect a television..........................................................................................................34
To make an infrared connection ............................................................................................34
Using PC Cards.......................................................................................................................35
To insert a PC Card...............................................................................................................35
To remove a PC Card ............................................................................................................36
Using Docking Products..........................................................................................................37
To install a docking tray........................................................................................................37
To dock the OmniBook..........................................................................................................37
To undock the OmniBook......................................................................................................39
5. MAINTENANCE AND TROUBLESHOOTING.....................................40

3
Cleaning the Computer...........................................................................................................40
To clean the case...................................................................................................................40
To clean the display...............................................................................................................40
Solving Common Problems......................................................................................................40
Accessory Problems...............................................................................................................41
Audio Problems.....................................................................................................................41
Display Problems...................................................................................................................42
Hard Disk Drive Problems.....................................................................................................42
Infrared Problems..................................................................................................................43
Keyboard and Pointing Device Problems ...............................................................................43
Memory Problems .................................................................................................................44
PC Card (PCMCIA) Problems...............................................................................................44
Performance Problems...........................................................................................................44
Power and Battery Problems..................................................................................................45
Printing Problems..................................................................................................................46
Serial, Parallel, and USB Problems........................................................................................47
Startup Problems...................................................................................................................48
INDEX......................................................................................................49

4
HP OmniBook 7100 User’s Handbook
• Using This Online Handbook.
• Finding More Information.
• Notice.
This handbook describes how to use the OmniBook with a Microsoft® Windows®
operating system. It focuses on the special Hewlett-Packard hardware and software,
not the Windows operating system itself. For questions about the use of the
operating system, refer to the Microsoft Windows manual shipped with the
OmniBook.
Using This Online Handbook
This online User’s Handbook looks similar to a printed manual—and it works like a
printed manual in many ways, too. However, you can do several handy things you
can’t do with a manual. For example, you can make the type larger or smaller. You
can click pictures to enlarge them. You can add electronic bookmarks for marking
key information. And you can print all or part of the manual on your printer.
• Press F1. You’ll see a description of the features of this online manual.
Finding More Information
This OmniBook User’s Handbook introduces the OmniBook and shows you how to
operate and troubleshoot your OmniBook. For more information about using your
OmniBook, look in these additional places:
• The printed OmniBook Reference Guide shows how to set up the operating
system, install and connect accessories, and maintain and upgrade the
OmniBook.
• The Microsoft Windows manual, shipped with your OmniBook, contains
information about using the standard features of your Windows operating
system.
• The online Help for Windows applications provides information about those
applications. Use the Help menu or Help button, or just press F1.
• The OmniBook Notes icon gives late-breaking information available after the
online manual was completed. Click Start, Programs, OmniBook Library,
OmniBook Notes.
• Many bookstores have books about Windows for people with different levels of
experience.
• For updates to the BIOS and other technical information, connect to our website
on the Internet at http://www.hp.com/omnibook.
• You can obtain a backup copy of the OmniBook Reference Guide (which came
with your OmniBook) from our website (http://www.hp.com/omnibook). You can
view or print it using an Acrobat viewer, available free of charge through our

5
website. To re-install the User’s Handbook onto your hard drive, insert the
Recovery CD and run Omnibook\Hputils\Disk1\Setup.Exe.
• OmniBook accessories may be purchased online. For the latest information, visit
our website at http://www.hp.com/omnibook.
Notice
This manual and any examples contained herein are provided “as is” and are subject
to change without notice. Hewlett-Packard Company makes no warranty of any kind
with regard to this manual, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Hewlett-Packard Co. shall not be
liable for any errors or for incidental or consequential damages in connection with
the furnishing, performance, or use of this manual or the examples herein.
Consumer transactions in Australia and the United Kingdom: The above disclaimers
and limitations shall not apply to Consumer transactions in Australia and the United
Kingdom and shall not affect the statutory rights of Consumers.
© Copyright Hewlett-Packard Company 1998. All rights reserved. Reproduction,
adaptation, or translation of this manual is prohibited without prior written permission
of Hewlett-Packard Company, except as allowed under the copyright laws.
The programs that control this product are copyrighted and all rights are reserved.
Reproduction, adaptation, or translation of those programs without prior written
permission of Hewlett-Packard Co. is also prohibited.
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Portions of the programs that control this product may also be copyrighted by
Microsoft Corporation, SystemSoft Corp., Crystal Semiconductor Corporation,
Phoenix Technologies, Ltd., and ATI Technologies Inc. See the individual programs
for additional copyright notices.
Microsoft, MS, MS-DOS, and Windows are registered trademarks of Microsoft
Corporation. Pentium and the Intel Inside logo are U.S. registered trademarks and
MMX is a U.S. trademark of Intel Corporation. TrackPoint is a U.S. registered
trademark of International Business Machines.
For warranty information, see the Support and Service booklet.
Hewlett-Packard Company
Mobile Computing Division
19310 Pruneridge Ave.
Cupertino, CA 95014, U.S.A.
Edition 1 March 1998

6
1. Introducing the OmniBook
• Identifying the Parts of the OmniBook.
• Learning About Windows.
• Safety Information.
• Working in Comfort.
Keep in mind the following features as you learn about your OmniBook.
• The OmniBook’s modular design provides maximum expandability without
compromising portability.
• The high-performance Pentium® CPU with MMX™ technology and enhanced
IDE hard drive provide you with the processing power needed to handle complex
graphics and large sound files.
• Two PC Card slots give you the ability to use standard PC Cards, such as a LAN
adapter or memory cards.
• The CD-ROM / floppy disk drive in the plug-in module bay can be replaced with
a second battery to give extended travel time.
Identifying the Parts of the OmniBook
OmniBook–Front View
1. Built-in microphone.
2. Status panel.

7
3. Blue power button.
Turns the OmniBook on and off.
4. Pointing stick (pointing device).
5. Touch pad (pointing device).
6. Built-in speakers.
7. Plug-in module bay.
The OmniBook includes a CD-ROM / floppy disk drive. You can purchase an
optional LS-120 drive, DVD drive, or a second battery.
8. Click buttons (for pointing devices).
9. Main battery.
10. System-off button (to shut down the OmniBook).
11. Kensington lock slot (security connector).
12. Latch to open and close the OmniBook.
OmniBook–Side View
13. AC adapter jack.
14. PC Card slots (upper and lower).
Accepts two Type-II cards or one Type-III card.
15. Audio jacks (left to right): audio line-in, external microphone, audio line-out.
16. Volume control wheel.
17. PC Card eject buttons (upper and lower PC Card slots).
Press once to pop out the button, and press again to eject the card.
18. Status lights (left to right): power state, hard disk activity, charging status.
19. Front infrared port.
There is a second infrared port on the rear of the OmniBook. Only one infrared
port can be enabled at a time.
OmniBook–Rear View

8
20. Parallel port (LPT1).
Use this port for a parallel printer or other parallel device.
21. Serial port (COM1).
Use this port for a serial mouse, a modem, a serial printer, or other serial device.
22. External monitor port (VGA).
23. TV-out port (supports video adapter cable).
24. Docking port (for the port replicator).
25. Universal serial bus port (USB).
26. PS/2 keyboard or PS/2 mouse port (supports Y-adapter).
27. Rear infrared port.
There is another infrared port on the front of the OmniBook. Use this port for
wireless data transmission between the OmniBook and another computer or a
printer with an infrared port. You must install infrared drivers. See the OmniBook
Reference Guide for instructions.
Learning About Windows
This OmniBook User’s Handbook does not discuss the Windows operating system.
Rather, it introduces the OmniBook and shows you how to operate it. For information
about Windows, see the following sources:
• The Windows online Help. Click Start, then Help.
• The Microsoft Windows manual shipped with your OmniBook.
• Many bookstores have books about Windows for people with different levels of
experience.
Safety Information
AC Adapter Safety
• Use only the ac adapter shipped with the OmniBook (HP part number F1454A).
Using any other ac adapter could damage the OmniBook and may void your
warranty. Refer to the warranty statement for your product.
Battery Safety
• To avoid risk of fire, burns, or damage to your battery, do not allow a metal
object to touch across the battery contacts.
• Use only the battery designated for use with your model of the HP OmniBook.

9
• Do not disassemble. There are no serviceable parts inside.
• Do not dispose of the battery in fire or water.
• Handle a damaged or leaking battery with extreme care. If you come in contact
with the electrolyte, wash the exposed area with soap and water. If it contacts
the eye, flush the eye with water for 15 minutes and seek medical attention.
• Do not expose the battery to high storage temperatures—above 60 °C (140 °F).
• When discarding a battery, contact your local waste disposal provider regarding
local restrictions on the disposal or recycling of batteries.
• To obtain a replacement battery, contact your local dealer or HP sales office.
• The battery cannot charge if the ambient temperature exceeds 45 °C (113 °F).
LED Safety
The infrared ports located on the front and rear panels of the OmniBook are
classified as a Class 1 LED (light-emitting diode) device according to International
Standard IEC 825-1 (EN60825-1). This device is not considered harmful, but the
following precautions are recommended:
• If the unit requires service, contact an authorized HP service center—see the
OmniBook Support and Service booklet.
• Do not attempt to make any adjustment of the unit.
• Avoid direct eye exposure to the infrared LED beam. Be aware that the beam is
invisible light and cannot be seen.
• Do not attempt to view the infrared LED beam with any type of optical device.
Laser Safety
The CD-ROM drive used with the OmniBook is certified as a Class 1 laser device
according to the U.S. Department of Health and Human Services (DHHS) Radiation
Performance Standard and International Standards IEC 825 / IEC 825-1 (EN60825 /
EN60825-1). This device is not considered harmful, but the following precautions are
recommended:
• Ensure proper use by reading and following the instructions carefully.
• If the unit requires service, contact an authorized HP service center—see the
OmniBook Support and Service booklet.
• Do not attempt to make any adjustment of the unit.
• Avoid direct exposure to the laser beam—do not open the unit.
Working in Comfort
Warning
Improper use of keyboards and other input devices has been associated with
ergonomic injury. For information about reducing your risk, see Working in
Comfort shipped with your OmniBook, or visit our ergonomics website,
http://www.hp.com/ergo.

10
2. Operating the OmniBook
• Powering the OmniBook.
• Starting and Stopping the OmniBook.
• Using the OmniBook Pointing Devices.
• Using the OmniBook Display.
• Adjusting the Sound System.
• Using the OmniBook Keyboard.
• Checking the Status of the OmniBook.
• Protecting the OmniBook.
Powering the OmniBook
To connect ac power
There are two ways to power the OmniBook: by ac adapter and by battery.
Caution
Use only the HP adapter intended for this product, model F1454A. Using any
other ac adapter could damage the OmniBook and may void your warranty.
Refer to the warranty statement for your product.
1. Connect the power cord to the ac adapter, then plug the cord into an ac outlet.
The light on the ac adapter shines when the adapter is powered.
2. Connect the ac adapter to the OmniBook’s left side, as shown.
3. Press the blue power button to turn on the OmniBook.
When the OmniBook is plugged into ac power and a battery is installed, it
automatically recharges the battery. To check the status of the battery, see
“Checking the Status of the OmniBook.”
Starting and Stopping the OmniBook

11
• To start and stop the OmniBook.
• To reset the OmniBook.
• To transport the OmniBook.
To start and stop the OmniBook
You can easily start and stop your OmniBook using the blue power button.
However, you may want to take advantage of the power modes, which provide
alternative methods for stopping your OmniBook—depending on power
considerations, types of active connections, or start-up time.
The OmniBook enters When you To exit this
mode
Standby mode
Saves minimal power.
Turns off only the display.
Restarts quickly.
Restores previous session.
Maintains network connections.
Press Fn+S
–or–
allow time-out.
Press any key or
move a pointing
device to display
your current
session ("Instant-
On").
Suspend mode
Saves significant power.
Turns off the display.
Saves current session to RAM.
Restarts quickly.
Restores previous session.
May restore network connections.*
Press blue power button
–or–
close the lid
–or–
select Start, Suspend**
–or–
allow time-out.
Press the blue
power button to
display your
current session
("Instant-On").
Hibernate mode
Saves maximum power.
Saves current session to disk, then
shuts down.
Restore previous session.
May restore network connections.*
Press Fn+F12
–or–
allow time-out.
Press the blue
power button to
restart and
restore your
previous session.
Off mode
Saves maximum power.
Turns off without saving current
session.
Unsaved data will be lost.
At startup, resets everything, starts
a new session, and restores
network connections.
Select Start, Shut Down
–or–
Press and hold the blue
power button until the
display shuts down.
Press the blue
power button to
restart with a new
session.
*Preserving network connections. A plug-and play operating system, such as
Windows 95, can restore network connections when you turn on the OmniBook.
For Windows NT 4.0 or a different operating system, you may have to reset the
OmniBook or restart the operating system to restore them.
** Windows 95 only.

12
Hint
Time-out settings. In order to save power or, conversely, to increase speed, you
can change the time-out settings. Time-out settings specify when to shut down
various components after periods of inactivity. There are separate time-out settings
for each power mode.
To reset the OmniBook
If Windows or the OmniBook stops responding, you can reset the OmniBook and
restart Windows.
1. If possible, shut down Windows.
2. Insert a pen or a straightened paper clip into the system-off button.
–or, if this fails–
Press and hold the blue power button until the display shuts down.
3. After the computer shuts down, press the blue power button to turn it back on.
To transport the OmniBook
1. Save your work.
2. From the Start menu, click Shut Down.
3. Disconnect all external devices.
4. Close the lid.
Using the OmniBook Pointing Devices
• To use the built-in pointing devices.
• To activate full touch pad capabilities.
• To activate full pointing stick capabilities.
• To configure pointing devices.

13
Two pointing devices (pointing stick and touch pad) are built into your OmniBook. By
default, drivers for both devices are installed and support the basic features of each
pointing device (but not the enhanced features of either).
You can customize the OmniBook to support enhanced touch pad or enhanced
pointing stick features. If you do this, keep in mind that you are selecting enhanced
features for either the touch pad or for the pointing stick. You cannot activate
enhanced features for both simultaneously.
1. Pointing stick (pressure-sensitive pointing device).
2. Touch pad (touch-sensitive pointing device).
3. Click buttons.
Both pointing devices use these click buttons, which work like the left and right
buttons on a standard mouse. What the buttons do depends on the software
being used.
To use the built-in pointing devices
1. Place your hands in the typing position.
2. Pointing stick. With your index finger, press the pointing device in the direction
you want the pointer to move. Pressing away from you moves the pointer up the
screen; pressing toward you moves the pointer down the screen.
Touch pad. Move a thumb or finger across the touch pad in the direction you
want the pointer to move.
3. Use the left and right click buttons, which function like the left and right buttons
on a mouse, to make your selection.
• To open an application, move the pointer over the icon, then press the left
button twice rapidly.
• To make menu selections, move the pointer to the item and press the left
button once.
• To open the shortcut menu for an item, move the pointer over the item and
click the right button.

14
• To drag an item, move the pointer over the item. Press and hold the left
button while you move the pointer to the new location. Release the button.
To activate full touch pad capabilities
The built-in pointing stick driver supports only basic touch pad features. To activate
full touch pad capabilities, you have to
• Remove the pointing stick driver.
• Disable the pointing stick.
• Install touch pad support.
Remove the pointing stick driver
1. From Control Panel, open Mouse, General and change the mouse type to
Standard PS/2 Port Mouse.
2. From Control Panel, open Add/Remove Program and remove IBM TrackPoint
support.
Disable the pointing stick
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select Touch Pad.
5. Press F10 to save and exit.
Install touch pad support
• For Windows 95
From the Start menu, run c:\omnibook\drivers\win95\touchpad\setup.exe.
For Windows NT 4.0
From the Start menu, run c:\omnibook\drivers\nt40\touchpad\install.exe.
To activate full pointing stick capabilities
To activate full pointing stick capabilities, you have to
• Remove the touch pad driver.
• Enable the pointing stick.
• Install pointing stick support.
Remove the touch pad driver
• From Control Panel, click Add/Remove Program and remove touch pad support.
Enable the pointing stick
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.

15
3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select Pointing Stick. (Choose Both if
you want basic touch pad features available.)
5. Press F10 to save and exit.
Install pointing stick support
• From Control Panel, open Mouse, General and change the mouse type--click
Have Disk and point to the directory listed below and select PS/2 TrackPoint.
For Windows 95
c:\omnibook\drivers\win95\trackpnt.
For Windows NT 4.0
c:\omnibook\drivers\nt40\ trackpnt.
To configure pointing devices
• To customize the operation of all pointing devices (pointing stick, touch pad, and
external PS/2 or serial mouse), use the Windows Control Panel Mouse icon to
access Mouse Properties. You can change left and right button actions, double-
click speed, pointer speed and tail, and more.
• To customize special pointing stick features, click the pointing stick icon on the
taskbar or open TrackPoint in Control Panel.
Using the OmniBook Display
• To adjust the display.
• To extend the life of the display.
To adjust the display
The OmniBook uses special key combinations, called hot keys, to control brightness.
• Press Fn+F1 to decrease the brightness.
• Press Fn+F2 to increase the brightness.
Hint
Brightness affects battery life. To maximize your battery operating time, set the
brightness to the lowest comfortable setting, so that the internal light uses less
power.
To extend the life of the display
Observe the following guidelines to extend the life of the backlight in the OmniBook
display.
• Set the brightness to the lowest comfortable setting (Fn+F1).

16
• When working at your desk, connect an external monitor and turn off the internal
display (Fn+F5).
• Avoid using a screen saver or other software that prevents the OmniBook from
changing to Suspend or Standby mode after a time-out period.
• Do not disable Suspend and Standby time-outs.
Adjusting the Sound System
• To adjust the volume manually.
• To adjust the volume in Windows.
The OmniBook supports Sound Blaster Pro-compatible sound and the Microsoft
Windows Sound System.
To adjust the volume manually
• To increase the volume, roll the volume control wheel towards the front of the
OmniBook.
• To decrease the volume, roll the wheel towards the rear of the OmniBook.
To adjust the volume in Windows
1. Click the speaker symbol in the taskbar.
2. Drag the volume control bar up or down to adjust the volume.
Using the OmniBook Keyboard
• To use the Fn hot keys.
• To use the Windows keys.
• To use the embedded keypad.
• To use the Alt Gr key.
Warning
Improper use of keyboards and other input devices has been associated with
ergonomic injury. For information about reducing your risk, see Working in
Comfort shipped with your OmniBook, or visit our ergonomics website,
http://www.hp.com/ergo.

17
To use the Fn hot keys
The combination of the Fn key plus another key creates a hot key—a
shortcut key sequence—for various system controls. Press and hold Fn
while pressing the desired key.
Hot key Does this
Fn + F1 Decreases the display’s brightness.
Fn + F2 Increases the display’s brightness.
Fn + F5 Switches among the built-in display, an external display, and
simultaneous displays.
Fn + F6
(hold) For use with two batteries: The battery indicator in the status panel
briefly displays the individual battery status for each battery you have
installed in the OmniBook.
Fn + F8 Toggles the embedded keypad on and off. Does not affect an
external keyboard. If Num Lock is on, then the numeric functions are
active; otherwise, cursor control is active.
Fn + F12 Enters Hibernate mode.
Fn + R Enters Suspend mode.
Fn + S Enters Standby mode.
Fn + F Toggles between front and rear infrared ports.
Fn +
NmLk Toggles Scroll Lock on and off.
To use the Windows keys
There are two Windows keys on the keyboard.
The one next to the Fn key brings up the Windows Start menu.
The one at the top center of the keyboard brings up the shortcut menu for
the current application. This is the same menu that appears when you click
the right mouse button while pointing at the application.
To use the embedded keypad
When the embedded keypad on the OmniBook's built-in keyboard is active, two
options are possible.
Num Lock on. Keys change to the numeric or arithmetic designations printed in light
gray on the keyboard.
Num Lock off. Keys change to cursor control keys.
1. Press the NmLk key to turn Num Lock on or off.
2. Press Fn+F8 to turn on the embedded keypad.

18
–or–
To temporarily turn on the embedded keypad, hold Fn while typing a key.
Status panel icons show the status of the embedded keypad and Num Lock.
Hint
Typing numbers. Consider leaving Num Lock on all the time. Then, when you want
to use the embedded keypad on your built-in keyboard, turn it on (by pressing
Fn+F8), or press Fn before each keypad key.
To use the Alt Gr key
Non-US keyboards have an Alt Gr key to the right of the spacebar. This is a shift key
providing access to certain keyboard characters.
• For a character in the lower-right corner of a key, press and hold the ALT GR to
type the character.
• For a character in the upper-right corner of a key, press and hold SHIFT and
ALT GR to type the character.
¬
‘ALTGR
Unshifted
SHIFT
Checking the Status of the OmniBook
• To interpret the status lights.
• To interpret the status panel indicators.
To interpret the status lights
The OmniBook also has status lights that report power status and drive activity.
When the CD-ROM / floppy disk drive is installed in the module bay, the following
lights are present on the front of the OmniBook.
1. Floppy disk drive light
¨ Steady green light. Floppy disk is being read from or written to.

19
2. CD-ROM drive light
¨ Steady green light. CD-ROM disk is being read from.
3. Power status light
¨ Steady green light. OmniBook on (On or Standby mode).
¨ Steady amber light. OmniBook suspended (Suspend mode).
¨ No light. OmniBook off (Off or Hibernate mode).
¨ Alternating green and amber light. OmniBook failed when resuming.
4. Disk drive activity light
¨ Steady green light. Hard disk drive is being read from or written to.
5. Charging status light
¨ Steady green light. AC adapter connected, battery full.
¨ Blinking green light. AC adapter connected, battery charging.
¨ No light. AC adapter not connected.
To interpret the status panel indicators
The OmniBook status panel, located above the keyboard, contains indicators that
show the current keyboard status, drive activity, and power status of the OmniBook.
Power status indicators
AC power. The ac adapter is connected.
Battery status. Shows the approximate charge level of the
battery relative to a full charge. Each bar represents a 10%
charge (displayed from right to left).
Battery presence. The upper and lower triangles indicate
the presence of main (upper) and second (lower) batteries. A
triangle blinks slowly when that battery is charging.
Battery low. No battery bars showing; triangles indicate
presence of battery. The OmniBook also beeps.
Defective battery. No battery bars showing and no triangles
indicating presence of battery; no charging even though ac
power is present.
Overheated battery. The battery is too hot to charge. Not
necessarily a defective battery.
Drive status indicators

20
CD-ROM drive, hard disk drive, or any plug-in module
drive. The OmniBook is accessing one of these internal
drives.
Floppy disk drive. The OmniBook is accessing the floppy
disk drive.
PC Card. There is activity between the PC Card and the
computer.
Keyboard status indicators
Caps Lock. Caps Lock is active.
Num Lock. Num Lock is active.
Keypad Lock. The built-in embedded keypad is active
(Fn+F8). Num Lock must also be on for the numeric keys.
Otherwise, the cursor keys are active. See “To use the
embedded keypad.”
Scroll Lock. Scroll Lock is active (Fn+NmLk).
Protecting the OmniBook
• To set or change a password.
• To delete a password.
• To attach a security cable.
• To install McAfee VirusScan.
To set or change a password
The OmniBook provides two levels of password protection—user password
protection and administrator password protection. You cannot set the user password
until you set an administrator password.
If password protection is set, then you will be prompted to enter a password
whenever you reset or turn on the computer (depending on your setting).
To set, change, or delete password protection for this OmniBook, use the BIOS
Setup utility. This program is described fully in the Reference Guide that came with
your OmniBook.
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
• Pointing devices do not work in the BIOS Setup utility.
• Active keys are described along the bottom of the window.
• Help information for the highlighted item appears on the right side of the
window.