HP 524sf Manual

Maintenance and Service Guide
524sf Monitor
N75879
524sw Monitor
N75888
524sh Monitor
N75903
524sa Monitor
N75897

527sf Monitor
N75882
527sw Monitor
N75891
527sh Monitor
N75900
527sa Monitor
N75894
SUMMARY
This guide provides information about spare parts, removal and replacement of parts, diagnostic tests, problem
troubleshooting, and more.

©Copyright 2023 HP Development
Company, L.P.
AMD is a trademark of Advanced Micro
Devices, Inc. Bluetooth is a trademark
owned by its proprietor and used by HP
Inc. under license. NVIDIA is a trademark
and/or registered trademark of NVIDIA
Corporation in the U.S. and other
countries. USB Type-C and USB-C are
registered trademarks of USB
Implementers Forum. DisplayPort and the
DisplayPort logo are trademarks owned by
the Video Electronics Standards
Association (VESA) in the United States
and other countries.
The information contained herein is
subject to change without notice. The
only warranties for HP products and
services are set forth in the express
warranty statements accompanying such
products and services. Nothing herein
should be construed as constituting an
additional warranty. HP shall not be liable
for technical or editorial errors or
omissions contained herein.
First Edition: Dec 20223
Document Part Number: 524sf-MSG-V1
Assembly part number:
N75879
N75888
N75903
N75897
N75882
N75891
N75900
N75894
Product notice
Only trained service personnel familiar with
this product should service it. Before
performing any maintenance or service, be
sure to read “Important Safety Information”.

iii
Table of Contents
1Getting started............................................................................................................................................................................. 1
Important safety information ............................................................................................................................................ 1
Important service information and precautions ........................................................................................................... 1
RoHS (2002/95/EC) requirements ....................................................................................................................................2
General descriptions............................................................................................................................................................2
Firmware updates.................................................................................................................................................................3
Before returning the repaired product to the customer...........................................................................................3
2Monitor features ..........................................................................................................................................................................4
Features...................................................................................................................................................................................4
Front components................................................................................................................................................................5
Rear components .................................................................................................................................................................6
Locating the serial number and product number .......................................................................................................7
3Illustrated parts catalog.............................................................................................................................................................9
How to order parts.............................................................................................................................................................15
4Removal and replacement procedures...............................................................................................................................16
Preparation for disassembly ............................................................................................................................................16
Rear Cover ............................................................................................................................................................................16
Connector repair................................................................................................................................................................ 29
VGA connector P100 .............................................................................................................................................31
HDMI connector P200......................................................................................................................................... 32
Function test ....................................................................................................................................................................... 33
Support and troubleshooting ........................................................................................................................................ 33
Index...................................................................................................................................................................................... 36

1
1Getting started
Read this chapter to learn about safety information and where to find additional HP resources.
Important safety information
Carefully read the cautions and notes within this document to minimize the risk of personal injury to service
personnel. The cautions and notes are not exhaustive. Proper service methods are important to the safe,
reliable operation of equipment. Improper service methods can damage equipment.
The service procedures recommended and described in this service manual provide effective methods of
performing service operations. Service engineers should have prior repair knowledge and experience as
well as appropriate training for the product before performing service procedures.
●Be sure your working environment is dry and clean and meets all government safety
requirements.
●Be sure that other persons are safe while you are servicing the product.
●Do not perform any action that can cause a hazard to the customer or make the product
unsafe.
●Use proper safety devices to ensure your personal safety.
●Always use approved tools and test equipment for servicing.
●Never assume the product’s power is disconnected from the main power supply. Check that it is
disconnected before opening the product’s cabinet.
●Modules containing electrical components are sensitive to electrostatic discharge (ESD). Follow
ESD safety procedures while handling these parts.
●Some products contain more than one battery. Do not disassemble or expose a battery to high
temperatures, such as throwing into fire, or the battery may explode.
●Refer to government requirements for battery recycling or disposal.
This information provides general service information for the monitor. Adherence to the procedures
and precautions is essential for proper service.
IMPORTANT: Only trained service personnel who are familiar with this HP product should perform service
or maintenance for it. Before performing any service or maintenance, personnel must read the important
safety information.
IMPORTANT: You must disconnect the power cord from the power source before opening the monitor
to prevent component damage.
Important service information and precautions
●Repair must be performed by professional service technicians in a repair center. End users
should not perform these procedures.

2
●Please note during servicing that the primary side is the high voltage area.
●This monitor meets ROHS requirements. Be sure to use lead-free solder wire when soldering.
●If you must change a capacitor, be sure to match the polarity as printed on the PCB.
●If you must replace a capacitor, make sure the specification and part number match the BOM
and location.
●If you must replace a capacitor, insert new parts carefully to avoid a short circuit caused by the
near pin.
●Do not get the board wet. Water and moisture can cause a short circuit that causes
malfunctions.
●To avoid damage, be sure to use lead-free solder.
●When soldering, work quickly to avoid overheating the circuit board.
●Keep the soldering iron tip clean and well tinned when replacing parts.
●After repair, perform a close inspection of the circuit board to confirm it is in good condition.
●After repair, perform a function test to confirm the power supply is working properly.
ERP Lot5 requirement
1. A professional repairer must have the technical competence to repair electronic displays and
comply with the applicable regulations for repairers of electrical equipment in the Member States
where the repairer operates. Reference to an official registration system as professional repairer,
where such a system exists in the Member States, shall be accepted as proof of compliance.
2. A professional repairer must have insurance that covers liabilities resulting from repairs, regardless
of whether required by the Member State.
RoHS (2002/95/EC) requirements
Applied to all countries that require RoHS.
The RoHS (Restriction of Hazardous Substance in Electrical and Electronic Equipment Directive) is a legal
requirement by the EU (European Union) for the global electronics industry sold in the EU and other
countries. Any electrical and electronics products launched in the market after June 2006 should meet
this RoHS requirement. Products launched in the market before June 2006 are not required to be
compliant with RoHS parts. If the original parts are not RoHS complaint, the replacement parts can be
non-ROHS complaint. If the original parts are RoHS compliant, the replacement parts MUST be RoHS
complaint.
If product service or maintenance requires replacing parts, confirm the RoHS requirement before
replacement.
General descriptions
This manual contains general information. There are two levels of service:
Level 1: Cosmetic/appearance/alignment service

3
Level 2: Circuit board or standard parts replacement
Firmware updates
Firmware updates for the monitor are available at support.hp.com. If no firmware is posted, the monitor
does not need a firmware update.
Before returning the repaired product to the customer
Perform an AC leakage current check on exposed metallic parts to be sure the product is safe to operate
without the potential of electrical shock. Do not use a line isolation transformer during this check.
Measurements that are not within specified limits present a possible shock hazard. You must check and
repair the product before returning it to the customer.

4
2Monitor features
This chapter provides an overview of the monitor’s features.
Features
Depending on the model, your monitor might include the following features:
●60.5 (23.8 in) diagonal viewable screen area with 1920 × 1080 FHD plus full-screen support for
lower resolutions; includes custom scaling for maximum image size while preserving original
aspect ratio
●68.6 cm (27.0 in) diagonal viewable screen area with 1920 × 1080 FHD resolution, plus full-
screen support for lower resolutions; includes custom scaling for maximum image size while
preserving original aspect ratio
●Liquid crystal display (LCD) with active matrix and in-plane switching (IPS)
●Refresh Rate Range up to 100Hz
●Wide color gamut to provide coverage of sRGB color spaces
●Anti-glare panel with an LED backlight
●Wide viewing angle to allow viewing from a sitting or standing position, or moving from side to
side
●High–Definition Multimedia Interface (HDMI), and VGA video inputs
●Tilt adjustment capability
●Audio build in (select models)
●Height adjustment capability (select models)
●Four on-screen display (OSD) buttons, three that you can reconfigure to quickly allow selection
of the most commonly used operations
●On-screen display (OSD) adjustments in several languages for easy setup and screen
optimization
●Energy saver feature to meet requirements for reduced power consumption
●Security cable slot on the rear of the monitor for an optional security cable
●Cable management feature for placement of cables and cords
NOTE: For safety and regulatory information, refer to the Product Notices provided in your
documentation kit. To access the latest user guide, go to http://www.hp.com/support, and follow the
instructions to find your product. Then select User Guides.

5
Front components
To identify the components on the front of the monitor, use this illustration and table.
524sf/524sw/524sa/527sf/527sw/527sa 524sh/527sh
Table 1-1 Front components and their descriptions
Component
Function
1 Power button Turns the monitor on or off.
2 Menu button Press to open the OSD menu. When the OSD menu
is open, the Menu light turns on.
3 OSD buttons (assignable) When the OSD menu is open, press the buttons to
navigate through the menu. The function light
icons indicate the default button functions.
You can reassign the function buttons to quickly
select the most commonly used operations.
NOTE: You can reconfigure the Function buttons in the OSD menu to quickly select the most
commonly used operations. Press the Menu button to open the OSD, and then select Menu
Control. Select Assign buttons, and then select one of the available options for the button you
want to assign.

6
Rear components
To identify the components on the rear of the monitor, use this illustration and table.
524sf/524sw/524sh/527sf/527sw/527sh 524sa/527sa
Table 1-2 Rear components and their descriptions
Component
Description
1 Security cable slot Connects an optional security cable
2 Power connector Power connector
3 Power Light On: The monitor is on
Off: Depending on your monitor model, monitor is off or in sleep mode
4 VGA connector Connects the VGA cable to the source device.
5 HDMI port 1 Connects the HDMI cable to the source device
HDMI port 2 (select models) Connects the HDMI cable to the source device
Table 1-3 Rear components and their descriptions (524sa, 527sa)
Component
Description
1 Security cable slot Connects an optional security cable
2 Power connector Power connector
3 Power Light On: The monitor is on
Off: Depending on your monitor model, monitor is off or in sleep mode

7
Locating the serial number and product number
Depending on the product, the serial number and product number are located on a label on the rear of
the monitor or on a label under the front bezel of the monitor head. You might need these numbers when
contacting HP for support.
For worldwide models (except China Sku):
Barcode label
4 Audio-in (microphone) jack Connects the audio cable to a source device such as a computer or game console
5 Audio-out (headphone) jack Connects headphones, earbuds or an audio cable
6 VGA connector Connects the VGA cable to the source device.
7 HDMI port 1 Connects the HDMI cable to the source device
HDMI port 2 (select models) Connects the HDMI cable to the source device

8
For China:
Bar code label
Safety label

9
3Illustrated parts catalog
To identify the monitor major components, use this illustration and table.
524sf/524sw/524sa
item
Description
Qty
1 Encore 3.5 524sf 524sh 1
Encore 3.5 524sw 524sa 1
2 WH A1007H00-6P-2L/A1257H00-6P-L #28 75mm(Delete pin4) W/B HF 1
WH A1007H00-6P-2L/A1257H00-6P-L #28 95mm+ACETATE(Delete pin4) W/B HF 1
3 WH FFC 30P(1.0mm)180mm(1FOLD+PRO)60V G/F W/CONN(A15+BC)+AL HFPOWER LENS (PC/TRANSPARENT)(OCEAN 20) 1
4 WH FFC 8P(0.5mm)270mm(3FOLD)60V G/F (A8+A6) HF21.5 LCM for HP Ocean’2021.5 HP Ocean LM215WF9-HSAN1 1
5 Audio BD ASS'Y HP Encore 3.5 TTS Board (MT9052) 2LMID FRAME FOR LHD (ABS+85% recycle ABS /JACK BACK (6009-0337))(OCEAN 20
P22 G5) 1
6 REAR SUPPORT-L(PCR-85% ABS+5% PET/JACK BLACK (6009-0337))WH FFC 30P(1.0mm) 380mm(2FOLD) 60V G/F W/CONN
(A15+BC)+AL(AA) HF 1
7 REAR SUPPORT-R(PCR-85% ABS+5% PET/JACK BLACK (6009-0337))WH FFC 8P(0.5mm) 560mm(2FOLD+1PRO) 60V G/F (A8+A5) HF 1
8 MAC. SCREW-MI M3.0*4.0L,NI WH A1007H00-6P-L/KY1251HS05-06 #28 450mm W/B HF 16
9 MYLAR BLACK(150*40*0.325t) (ENCORE 3-M24F LGD PANEL)MAIN BD ASS'Y HP P22 G5 (M215HCA) 2L 1
MYLAR BLACK(16.5*15*0.325t) (ENCORE 3-SHIELDING MIDDLE SCREW) 1
10 MAIN BD ASS'Y HP Encore 3.5 524sf (LM238WF8-SJA1) 2LPower BD ASS'Y (HP Ocean 20 25W POWER BD) 1
MAIN BD ASS'Y HP Encore 3.5 524sw (LM238WF8-SJA1) 2L 1

10
MAIN BD ASS'Y HP Encore 3.5_V2 524sa (LM238WF8-SJA1) 4L 1
11 MAIN BD ASS'Y HP Encore 3.5 524sa TTS (LM238WF8-SJA1) 4LMYLAR BLACK FOR SHIELDING BOT (125.7*94.4*0.5t) (OCEAN 20) 1
11 SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3)-C 1
SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3)MYLAR BLACK FOR SHIELDING TOP (57.3*50*0.2t) (OCEAN 20) 1
SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3.5 FOR TTS)MAIN SHIELDING(OCEAN 20 P22 G5 & P22H G5) ASS'Y 1
12 MYLAR BLACK(16.5*15*0.325t) (ENCORE 3-SHIELDING MIDDLE SCREW) 1
13 MAC. SCREW-MH #4-40*5.0L,Ni OSD KEY EXTERNAL PARTS (ABS+85% recycle ABS /JACK BACK (6009-0337)) (OCEAN 20 P22 G5) 21
14 REAR COVER(ABS 85% PCR +5% OBP/JACK BLACK (6009-0337))(ENCORE 3-M24F)ASS'YOSD KEY INTERNAL PARTS (ABS+85% recycle ABS
/JACK BACK (6009-0337))(OCEAN 20 P22 G5) 1
REAR COVER(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3-M24FW)ASS'YWALL MOUNT BKT(SGCC 1.2t)(VX2363) 2
REAR COVER(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3-M24FWA)ASS'YREAR COVER (ABS+85% recycle ABS /JACK BACK (6009-
0337))(OCEAN 20 P22 G5) 1
14-1 REAR COVER(ABS 85% PCR +5% OBP/JACK BLACK (6009-0337))(ENCORE 3-M24F)ASS'YVESA COVER (ABS+85% recycle ABS /JACK BACK
(6009-0337))(OCEAN 20 P22 G5) 1
REAR COVER(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3-M24FW) 1
REAR COVER(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3-M24FWA) 1
14-2 DISPLAY BD ASS'Y HP Encore III 1
14-3 DISPLAYKEY(ABS 85% PCR +5% OBP/JACK BLACK (6009-0337))(ENCORE 3) 1
DISPLAYKEY(VIRGIN ABS+5% PET/CERAMIC WHITE)(ENCORE 3) 1
14-4 SPONGE PU(24.0*12.0*11.0t)(ENCORE2_23F)(BLK) 1
15 MAC. SCREW-MI M3.0*6.0L, BLK-ZNNI(HEAD DIAMETER 7.0) 2
MAC. SCREW-MI M3.0*6.0L,NI(HEAD DIAMETER 7.0) 2
16 HINGE(ENCORE3-M27f)(Sliver) GT MAC. SCREW-MF M3.0*4.0L,NI 19
17 NECK(ENCORE3-M27f)(Sliver) ASS'Y GT TAP. SCREW-TF #3.0*6.0L,Ni 12
18 BASE(ENCORE3-M24f)(Sliver) GT TAP. SCREW-TB #2.5*5.0L,Ni 12
19 FRONT DECO(ABS 85% PCR +5% OBP/PHI NATURAL SILVER)(ENCORE 3.5-524sf)TAP.SCREW-T1 M2.0*3.0L,NI 13
FRONT DECO(ABS 85% PCR +5% OBP/PHI NATURAL SILVER)(ENCORE 3.5-524sw)ASS'Y 1
FRONT DECO(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3.5-524sa)ASS'Y 1
19-1 FRONT DECO(ABS 85% PCR +5% OBP/PHI NATURAL SILVER)(ENCORE 3.5-524sf) 1
FRONT DECO(ABS 85% PCR +5% OBP/PHI NATURAL SILVER)(ENCORE 3.5-524sw) 1
FRONT DECO(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3.5-524sa) 1
19-2 LENS(PC122/TRANSPARENT)(ENCORE 3) 1
19-3 FOAM TAPE (L534*W2*0.6t EXP060-D33-S) 1
20 SPK BOX 2W 4ohm 50*72*18.34mm (R420mm/L130mm) IEC for HP Encore3.5 HFMAC. SCREW-MI M3.0*4.0L,BLK-ZnNi 1

11
524sh
item
Description
Qty
1 Encore 3.5 524sf 524sh 1
2 WH A1007H00-6P-2L/A1257H00-6P-L #28 75mm(Delete pin4) W/B HF 1
3 WH FFC 30P(1.0mm)180mm(1FOLD+PRO)60V G/F W/CONN(A15+BC)+AL HF 1
4 WH FFC 8P(0.5mm)270mm(3FOLD)60V G/F (A8+A6) HF21.5 LCM for HP Ocean’2021.5 HP Ocean LM215WF9-HSAN1 1
5 REAR SUPPORT-L(PCR-85% ABS+5% PET/JACK BLACK (6009-0337)) 1
6 REAR SUPPORT-R(PCR-85% ABS+5% PET/JACK BLACK (6009-0337)) 1
7 MAC. SCREW-MI M3.0*4.0L,NI 16
8 MAIN BD ASS'Y HP Encore 3.5 524sh (LM238WF8-SJA1) 2L 1
9 SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3)-C 1
10 REAR COVER(ABS 85% PCR +5% OBP/JACK BLACK (6009-0337))(Hp M24h)ASS'Y 1
10-1 REAR COVER(ABS 85% PCR +5% OBP/JACK BLACK (6009-0337))(Hp M24h) 1
10-2 DISPLAY BD ASS'Y HP Encore III 1
10-3 DISPLAYKEY(ABS 85% PCR +5% OBP/JACK BLACK (6009-0337))(ENCORE 3) 1
10-4 SPONGE PU(15*12*13t)(BLK) 21
10-5 SPONGE PU(80*3.0*8.0T)(BLK) 1
10-6 POWER LENS(PC/TRANSPARENT)(2213xi) 1
11 MAC. SCREW-MI M3.0*6.0L, BLK-ZNNI(HEAD DIAMETER 7.0) 1
12 HINGE-HOLDER BKT(SGCC 2T) (Hp M24h&M27h) 2
13 NECK(Hp M24h)(Sliver)_CX 1
14 BASE(Hp M24h)(Sliver)_CX 1

12
13 NECK(Hp M24h)(Sliver)_FFT 1
14 BASE(Hp M24h)(Sliver)_FFT 1
15 FRONT DECO(ABS 85% PCR +5% OBP/PHI NATURAL SILVER)(ENCORE 3.5-524sh)ASS'Y 1
15-1 FRONT DECO(ABS 85% PCR +5% OBP/PHI NATURAL SILVER)(ENCORE 3.5-524sh) 1
15-2 LENS(PC122/TRANSPARENT)(ENCORE 3) 1
15-3 FOAM TAPE (L534*W2*0.6t EXP060-D33-S) 1
527sf/527sw/527sa
item Description Qty
1 FRONT DECO(ABS 85% PCR +5% OBP/NATURAL SILVER)(ENCORE 3.5-527sf)ASS'Y 1
FRONT DECO(ABS 85% PCR +5% OBP/NATURAL SILVER)(ENCORE 3.5-527sw)ASS'Y 1
FRONT DECO(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3.5-527sa)ASS'Y 1
2 Bare LCM, LM270WFD-HSAK1 1
Bare LCM, LM270WFD-HSAY1 1
3 REAR SUPPORT-L(PCR-85% ABS+5% PET/JACK BLACK (6009-0337)) ENCORE 3-M27f 1
4 REAR SUPPORT-R(PCR-85% ABS+5% PET/JACK BLACK (6009-0337)) ENCORE 3-M27f 1
5 MAC. SCREW-MI M3.0*4.0L,NI 16
6 WH A1007H00-6P-2L/A1257H00-6P-L #28 75mm(Delete pin4) W/B HF 1
7 WH FFC 30P(1.0mm)180mm(1FOLD+PRO)60V G/F W/CONN(A15+BC)+AL HF 1
8 WH FFC 8P(0.5mm)270mm(3FOLD)60V G/F (A8+A6) HF 1
9 MYLAR BLACK(185*40*0.325t) (ENCORE 3-M27F) 1
MYLAR BLACK(185*40*0.325t) (ENCORE 3-527sa TTS) 1
10 MAIN BD outer preelaboration for HP 527sf Lehui (LM270WFD-SJA1)
MAIN BD outer preelaboration for HP 527sw Lehui (LM270WFD-SJA1) 1

13
MAIN BD outer preelaboration for HP 527sa Lehui (LM270WFD-SJA1) TTS
11 SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3)-C 1
SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3) 1
12 HINGE(ENCORE3-M27f)(Sliver) CX 1
13 NECK(ENCORE3-M27f)(Sliver) ASS'Y CX 1
14 BASE(ENCORE3-M27f)(Sliver) CX 1
12 HINGE(ENCORE3-M27f)(Sliver) GT 1
13 NECK(ENCORE3-M27f)(Sliver) ASS'Y GT 1
14 BASE(ENCORE3-M27f)(Sliver) GT 1
15 MAC. SCREW-MI M3.0*6.0L, BLK-ZNNI(HEAD DIAMETER 7.0) 2
MAC. SCREW-MI M3.0*6.0L,NI(HEAD DIAMETER 7.0) 2
16 DISPLAY BD ASS'Y HP Encore III 1
17 REAR COVER(ABS 85% PCR +5% OBP/JACK BLACK (6009-0337))(ENCORE 3-M27F)ASS'Y 1
REAR COVER(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3-M27FW)ASS'Y 1
REAR COVER(ABS 85% PCR +5% OBP/CERAMIC WHITE)(ENCORE 3-M27FWA)ASS'Y 1
18 SPK BOX 2W 4ohm 50*72*18.34mm (R420mm/L130mm) IEC for HP Encore3.5 HF 1
527sh

14
item Description Qty
1 FRONT DECO(ABS 85% PCR +5% OBP/NATURAL SILVER)(ENCORE 3.5-527sh)ASS'Y 1
2 Bare LCM, LM270WFD-HSAK1 1
3 REAR SUPPORT-L(PCR-85% ABS+5% PET/JACK BLACK (6009-0337)) ENCORE 3-M27f 1
4 REAR SUPPORT-R(PCR-85% ABS+5% PET/JACK BLACK (6009-0337)) ENCORE 3-M27f 1
5 MAC. SCREW-MI M3.0*4.0L,NI 16
6 WH A1007H00-6P-2L/A1257H00-6P-L #28 75mm(Delete pin4) W/B HF 1
7 WH FFC 30P(1.0mm)180mm(1FOLD+PRO)60V G/F W/CONN(A15+BC)+AL HF 1
8 WH FFC 8P(0.5mm)270mm(3FOLD)60V G/F (A8+A6) HF 1
9 MYLAR BLACK(185*40*0.325t) (ENCORE 3-M27F) 1
10 MAIN BD ASS'Y HP Encore 3.5_V2 527sh (LM270WFD-SJA1) 2L BOT 1
11 SHIELDING (SECC 0.5T)(1A2H-AUDIO)(ENCORE3)-C 1
12 HINGE-HOLDER BKT(SGCC 2T) (Hp M24h&M27h) 1
13 NECK(Hp M27h)(Sliver)_CX 1
14 BASE(Hp M27h)(Sliver)_CX 1
13 NECK(Hp M27h)(Sliver)_FFT 1
14 BASE(Hp M27h)(Sliver)_FFT 1
15 MAC. SCREW-MI M3.0*6.0L, BLK-ZNNI(HEAD DIAMETER 7.0) 4
16 DISPLAY BD ASS'Y HP Encore III 1
17 REAR COVER(ABS 85% PCR +5% OBP/JACK BLACK (6009-0337))(HP M27hF)ASS'Y 1