HP GV546A4 User manual

1. Function: Performs the function set in the OSD menu (OSD
Control > Function Control).
4. Minus: Navigates backward through the OSD menu and
decreases adjustment levels; when the OSD menu is inactive,
activates the auto-adjustment feature to optimize the screen
image.
2. Input: Selects the video input (DVI-1, DVI-2, HDMI, DisplayPort,
Component, S-Video, or Composite).
5. Menu/Select: Opens, selects or exits the OSD menu.
3. Plus: Navigates forward through the OSD menu and increases
adjustment levels.
6. Power LED: Green = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
Model
GV546A4
QuickSpecs
HP DreamColor LP2480zx Professional Display
Overview
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 1

Panel Type IPS 24-in (60.96-cm) wide-aspect screen
Viewable Image Area
(diagonal)
24 in (60.96 cm) wide-aspect screen
Screen Opening
(W x H)
20.54 x 12.80 in (52.16 x 32.52 cm)
Panel Type IPS
Aspect Ratio 16:10
Viewing Angle (typical)
1
178 degrees (to CR of 10:1 min.)
Maximum White
Luminance
1
250 cd/m
2
(typ.)
Minimum White
Luminance
50 cd/m
2
(typ.)
Black Luminance 0.05 cd/m
2
(typ. black level at minimum white level)
Contrast Ratio (typical)
1
1000:1
Response Rate (typical)
1,2
12 ms (rise+fall, full black-to-white-to-black); 6 ms (gray to gray)
Pixel Pitch 0.270 mm
Backlight Life (to half
brightness)
50K hours
Backlight Type RGB LEDs
Gamma/Tone Response Programmable from "gamma" value of 1.0 to 3.0.
Color Gamut Native gamut approx. 133% NTSC (typ. in CIE 1976 u'v' space)
Adobe RGB Coverage 100% (typ.)
sRGB Coverage 100% (typ.)
Display Colors Over 1 billion colors in native mode
Lookup Table 12 bits per entry, 1024 entries per table.
Internal Processing Min. 10 bits/color throughout video processing pipeline.
Bezel Width 0.71 in (1.8 cm)
On Screen Display (OSD) &
Controls
Buttons or Switches Function Select, Input Select/Exit OSD, Plus (+), Minus (-), Menu/Select, Power
OSD Languages Chinese (simplified), Dutch, English, Spanish, French, Italian, Japanese
OSD Functions (partial list) Color Space, Luminance, Whitepoint, Primaries and Gamma Information, Reset
to Factory Calibration, Reset to Last Calibration, Black Level, Overdrive,
Custom Scaling, PIP Controls, Language, Power Saver, Power on Recall, Bezel
Button LED, Auto EDID Update, Sleep Timer, Function (button) Control,
Monitor Status Message, Warning Messages, Calibration Limit, OSD Button
Labels, Mode Display, Video Input Control, Input Auto-Switching, Information
(menu), Factory Reset., Intuitive OSD supporting key features of monitor
Signal Interface/
Performance
Horizontal Frequency 24 – 80 kHz
Vertical Frequency 47 – 61 Hz. No internal frame rate conversion at 48, 50, and 59.94/60 Hz
Native Resolution 1920 x 1200 pixels
Preset Graphic Timing
Modes (non-interlaced)
640 x 480 @ 60 Hz
QuickSpecs
HP DreamColor LP2480zx Professional Display
Technical Specifications
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 2

Modes (non-interlaced)
(Per VESA DMT or CVT
standards unless
otherwise noted)
720 x 400 @ 70 Hz
800 x 600 @ 60 Hz
1024 x 768 @ 60 Hz
1280 x 768 @ 60 Hz
1280 x 960 @ 60 Hz
1280 x 1024 @ 60 Hz
1600 x 1000 @ 60 Hz
1600 x 1200 @ 60 Hz
1680 x 1050 @ 60 Hz
1920 x 1080 @ 60 Hz
1920 x 1200 @ 24 Hz ; 48 Hz, and @ 60 Hz (CVT and CVT-R timings)
2048 x 1080 @ 48 Hz and 60 Hz
2048 x 1200 @ 48 Hz and 60 Hz
SDTV/HDTV Timing Modes
(per CEA standards unless
otherwise noted)
720 x 480 @ 60 Hz (interlaced)
720 x 480 @ 60 Hz (progressive)
720 x 576 @ 50 Hz (interlaced)
720 x 576 @ 50 Hz (progressive)
1280 x 720 @ 50 Hz (progressive)
1280 x 720 @ 60 Hz (progressive)
1920 x 1080 @ 50 Hz (interlaced)
1920 x 1080 @ 60 Hz (interlaced)
1920 x 1080 @ 50 Hz (progressive)
1920 x 1080 @ 60 Hz (progressive)
Maximum Pixel Clock
Speed
200 MHz on DVI-I (analog), HDMI, and DisplayPort inputs; 165 MHz max on
DVI-I digital inputs.
User Programmable
Timing Modes
20 additional user-programmable timings may be stored.
Color Space Presets 7 color space presets; all user-programmable six factory programmed: sRGB,
Rec. 709, Rec. 601, Adobe® RGB, DCI-P3 emulation (97%), full gamut
3
Anti-Glare Yes
Anti-Static Yes
Default Color
Temperature
6500K
Video and Other Inputs Video Inputs Provided DVI-I (2), DisplayPort 1.1, and HDMI 1.3 with HDCP support; Component
(YPbPr), S-Video, Composite
Self Powered USB 2.0 Hub 1 upstream, 4 downstream USB 2.0 ports.
Analog Input Signal Std. VESA VSIS (0.7V black-to-white, nom.) on DVI-I inputs.
Analog Input Impedance 75 ohms, all analog inputs
Sync Input TTL (analog input section of DVI-I inputs)
Cables 1 VGA to DVI-I, 1 DVI-D to DVI-ID 1 DisplayPort, 1 HDMI, 1 USB
Video Cable Length 6.6 ft (2.0 m) (all)
QuickSpecs
HP DreamColor LP2480zx Professional Display
Technical Specifications
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 3

Power AC Line Voltage 100 – 240 VAC
Frequency 50/60 Hz
Typical Power
Consumption
42 W (120 VAC, no USB devices connected, and sRGB Color Space preset).
Maximum 90 W
Power Saving 10 W in "sleep" mode; 3W in "off" mode
Power Cable Length 6.2 ft (1.9 m)
Mechanical Dimensions (H x W x D) Unpacked 16.7 to 20.67 x 22.24 x 10 in
(42.5 to 52.5 x 56.5 x 25.4 cm)
Unpacked w/o stand (head
only)
14.76 x 22.24 x 3.86 in (37.5 x 56.5 x 9.8 cm)
Packaged 18.43 x 26.85 x 14.6 in (46.8 x 68.2 x 37.1 cm)
Weight Unpacked 27.5 lb (12.5 kg)
Unpacked w/o stand (head
only)
18.7 lb (8.5 kg)
Packaged 33 lbs (15 kg)
Tilt Range –5 to +35 degrees
Swivel Range –45 to +45 degrees
Height Adjustable 3.94 in (10.0 cm) range
Pivot Rotation Yes, 90 degrees
Options Optional glare-reduction hood available.
Environmental Temperature – Operating 41° to 95° F (5 to 35° C)
Temperature –
Non-operating
–4° to 140° F (–20 to +60° C)
Humidity – Operating 20% to 80%, non-condensing
Humidity –
Non-operating
5% to 95% (38.7 deg. C max. wet-bulb temperature)
Altitude – Operating 0 to 12,000 ft (3650 m)
Altitude –
Non-operating
0 to 40,000 ft (12,000 m)
Other Accessories Included 1 VGA to DVI-I, 1 DVI-D to DVI-D, 1 DisplayPort, 1 HDMI, 1 USB, 1 Power cable,
Software and documentation CD that includes HP Display Assistant software,
monitor driver, software, and product documentation
Software HP Display Assistant is a software utility that allows monitor adjustment,
color calibration, and security/asset management using the Display Data
Channel Command Interface (DDC/CI) protocol of the connected desktop PC.
HP Display LiteSaver feature allows you to schedule Sleep mode at preset
times to help protect the monitor against image retention, drastically lower
power consumption and energy costs, and extend the lifespan of the monitor.
User Guide Languages English, Arabic, Bahasa Indonesian, S. Chinese, T. Chinese, Czech, Danish,
Dutch, Finnish, French, German, Greek, Korean, Italian, Japanese, Norwegian,
Polish, Brazilian Portuguese, Russian, Slovenian, LA Spanish, Swedish, Turkish
QuickSpecs
HP DreamColor LP2480zx Professional Display
Technical Specifications
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 4

Warranty Languages English, French, Spanish, Brazilian Portuguese, Danish, Dutch, Finnish,
German, Italian, Norwegian, Swedish, Turkish, Bahasa, Korean, S. Chinese, and
T Chinese.
Color Carbonite/silver
VESA External Mounting Yes (Standard 4 hole pattern, 100 mm)
Security Lock-Ready Yes
Environmental Data Eco-Label Certifications
and Declarations
This product has received or is in the process of being certified to the
following approvals and may be labeled with one or more of these marks:
IT ECO declaration
Energy Consumption
(in accordance with
ENERGY STAR® test
method)
AC Input Voltage at 100
VAC +/- 5 VAC, 50 Hz +/-
3 Hz
AC Input Voltage at 115
VAC +/- 5 VAC, 60 Hz +/-
3 Hz
AC Input Voltage at 230
VAC +/- 5 VAC, 50 Hz +/-
3 Hz
Normal Operation 65 watts 65 watts 65 watts
Sleep 1.4 watts 2.2 watts 1.3 watts
Off 1.3 watts 2.2 watts 1.2 watts
Heat Dissipation* AC Input Voltage at 100
VAC +/- 5 VAC, 50 Hz +/-
3 Hz
AC Input Voltage at 115
VAC +/- 5 VAC, 60 Hz +/-
3 Hz
AC Input Voltage at 230
VAC +/- 5 VAC, 50 Hz +/-
3 Hz
Normal Operation 222 BTU/hr 222 BTU/hr 222 BTU/hr
Sleep 5 BTU/hr 8 BTU/hr 4 BTU/hr
Off 4 BTU/hr 8 BTU/hr 8 BTU/hr
* Heat dissipation is calculated based on the measured watts, assuming the service level is attained for
one hour.
Longevity and Upgrading Upgradeability features contained in the product include:
1 upstream, 4 downstream USB 2.0 ports.
Ergonomics The monitor meets the ergonomic requirement of EN-ISO 13406-2 for flat
panel displays.
Additional Information This product is in compliance with the Restrictions of Hazardous Substances
(RoHS) Directive, 2002/95/EC.
This HP product is designed to comply with the Waste Electrical and Electronic
Equipment (WEEE) Directive, 2002/96/EC.
This product is in compliance with California Proposition 65 (State of
California; Safe Drinking Water and Toxic Enforcement Act of 1986).
This product is in compliance with the IEEE 1680 (EPEAT) standard at the
Silver level, see www.epeat.net .
Plastics parts weighing over 25 grams used in the product are marked per ISO
11469 and ISO1043.
Display meets the requirement for low frequency electromagnetic fields per
TCO and prEN50279 A/B/C.
QuickSpecs
HP DreamColor LP2480zx Professional Display
Technical Specifications
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 5

This product contains 0% recycled materials (by wt.)
This product is 94.0% recyclable when properly disposed of at end of life.
Packaging Materials
External:
Polyethylene – 46.6 g
Plasttic/aluminum – 80.4 g
Corrugated carton – 1878.2 g
Internal
EPS (Expanded Polystyrene) – 632.4 g
Material Usage This product does not contain any of the following substances in excess of
regulatory limits (refer to the HP General Specification for the Environment at
www.hp.com/hpinfo/globalcitizenship/environment/supplychain/
gen_specifications.html
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants – may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel – finishes must not be used on the external surface designed to
be frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) – except for wires and cables, and certain
retail packaging has been voluntarily removed from most applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
Packaging HP follows these guidelines to decrease the environmental impact of product
packaging:
Eliminate the use of heavy metals such as lead, chromium, mercury
and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
QuickSpecs
HP DreamColor LP2480zx Professional Display
Technical Specifications
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 6

Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and DIN
6120 standards.
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return and recycling programs
in many geographic areas. To recycle your product, please go to:
www.hp.com/recycle or contact your nearest HP sales office. Products
returned to HP will be recycled, recovered or disposed of in a responsible
manner.
Hewlett-Packard
Corporate Environmental
Information
For more information about HP's commitment to the environment:
Global Citizenship Report
www.hp.com/hpinfo/globalcitizenship/gcreport/index.html
Eco-label certifications
www.hp.com/hpinfo/globalcitizenship/environmentproductdesign/
ecolabels.html
ISO 14001 certificates:
www.hp.com/hpinfo/globalcitizenship/environment/operations/
envmanagement.html
Options HP LCD Speaker Bar-Part
number NQ576AA
Powered directly by the monitor or PC, the Speaker Bar seamlessly attaches to
the monitor's lower bezel to bring full audio support to the monitor. Features
include dual speakers with full sound range and an external jack for
headphones. Sold separately. For more information, refer to the HP LCD
Speaker Bar QuickSpec.
HP USB Graphics Adapter-
Part number NL571AA
Enables connection of up to six simultaneous displays to help you boost
productivity and multi-task across several open applications. Use one Adapter
to bridge between a notebook or desktop PC and second monitor or use
multiple Adapters to connect several displays to each other.
HP Business PC Security
Lock Kit-Part number
PV606AA
Attaches to the rear of the PC with a six-foot steel cable that can be used to
secure a PC or peripherals such as mice, keyboards, monitors or USB security
devices to protect them against unauthorized removal by physically
connecting the system to an anchor point.
HP DreamColor Advanced
Profiling Solution-Part
number KZ300AA
LCD monitor option designed for those professional users who require the
precision color accuracy in their work output; quickly and accurately allows the
user to calibrate his monitor front of screen setting to prevent any drift of
critical monitor color or whitepoint settings.
HP LCD-Hood Kit-Part
number KZ301AA
Monitor option designed for critical use applications where shielding from
contrasting open back light sources are required; enables an improved visible
monitor resolution by providing a darkened fore space from which to view the
monitor's panel.
Certification and
Compliance
TCO'99, ISO 13406-2 VDT Guidelines Approval, CISPR Requirements, VCCI Approvals, MIC (Korean)
Requirements, CSA, Australian ACA Approval, "GS" Mark, TUV Approvals, CE Marking, FCC Approval, CCC,
Microsoft® Windows® Certification (Microsoft® Windows® 98, Microsoft Windows 2000, Microsoft Windows
XP, and Windows Vista® Premium)
Compatibility Compatible with platforms using the VESA standard video modes. Recommended for use with HP
products.
QuickSpecs
HP DreamColor LP2480zx Professional Display
Technical Specifications
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 7

Service and Warranty Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support. Replacement
options may include second business day on-site service, or next business day direct replacement, at HP's
sole discretion.
4
With direct replacement, HP will ship a replacement display product directly to you. Using
the prepaid shipping labels provided, return your failed display to HP in the same packaging as the
replacement. Certain restrictions and exclusions apply. For details see your product warranty or contact
HP Customer Support.
1
All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance
may vary either higher or lower.
2
OSD OverDrive (in the Image Control menu) control set to Enabled.
3
Programming color space presets requires use of optional calibration accessory and software
4
HP Care Pack Services extend service contracts beyond the standard warranties. Service starts from date of hardware purchase. To
choose the right level of service for your HP product, use the HP Care Pack Services Lookup Tool at www.hp.com/go/lookuptool .
Additional HP Care Pack Services information by product is available at www.hp.com/hps/carepack . Service levels and response times
for HP Care Packs may vary depending on your geographic location.
QuickSpecs
HP DreamColor LP2480zx Professional Display
Technical Specifications
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 8

1. Release/locking 1. Four 100 mm VESA mount screw holes 1. Locking pin screw
2. Four 100 mm VESA mount screw holes 2. Locking pin hole on release/locking arm
3. Mounting holes for attachment to back
of monitor stands
Introduction
The HP Quick Release, which ships standard with the HP DreamColor LP2480zx Professional Display, is an easy to use, 100 mm VESA-
compliant, flat panel monitor mounting solution that allows you to quickly and securely attach a flat panel monitor to a variety of
stands, brackets, arms or wall mounts. HP Quick Release can also be used for mounting any combination of devices that are compatible
with the 100 mm VESA Flat Display Mounting Interface Standard. The failsafe "Sure-Lock" mechanism snaps the monitor (or mounted
device) securely in place, and can be further secured with a theft-deterrent security screw.
Uniquely flexible product configurations
HP Quick Release enables uniquely flexible product configuration alternatives in a variety of settings, such as:
Storefronts/kiosks: Mount flat panel monitors for easy viewing and add touchscreens for interactivity.
Trade shows: Securely mount LCD TVs or monitors in common areas and quickly remove them for safekeeping at the end of the
day.
Front office environments: Minimize desk space requirements with wall or swing-arm mounting of monitors in reception areas.
Training labs: Mount a monitor directly on a 100 mm VESA-compatible PC or an HP Thin Client for all-in-one convenience.
Medical/institutional settings: Securely mount monitors in nursing stations and public areas.
Conference rooms: Mount projectors (with 100 mm VESA-compliant pre-drilled holes) on ceilings, and monitors on walls or
tables.
QuickSpecs
HP DreamColor LP2480zx Professional Display
Overview - HP LCD Monitor Quick Release
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 9

1.
2.
3.
Mechanical Dimensions (H x W x D) Packaged 7.8 x 6.25 x 1.5 in
(19.8 x 15.9 x 3.8 cm)
Unpackaged 6.3 x 5.2 x 0.65 in
(16 x 13.2 x 1.65 cm)
Weight Packaged 1.1 lb (0.49 kg)
Unpackaged 0.82 lb (0.37 kg)
Additional components Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)
One Quick Release "locking" screw
Color Carbonite
Notes No HP monitors allow positioning of a thin client product between a monitor screen and its stand.
The Quick Release device is not to be used between a monitor screen and its stand unless provided
that way from the factory.
Under no circumstances is the Quick Release device intended to be used in an orientation where the
Release/Lock lever is oriented downward.
Supported weight
capacity
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending upon
the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e. the
combined weight of the monitor and a second device such as an HP Thin Client cannot exceed 24 pounds.
Because mounting surfaces vary widely and the final mounting method and configuration may vary,
mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that you
consult with a qualified engineering, architectural or construction professional to determine the
appropriate type and quantity of mounting fasteners required for your application and to ensure that your
mounting solution is properly installed to support applied loads.
© Copyright 2014 Hewlett-Packard Development Company, L.P.
Microsoft, Windows, and Windows Vista are trademarks of the Microsoft group of companies. Adobe and Adobe RGB are trademarks of
Adobe Systems Incorporated.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
QuickSpecs
HP DreamColor LP2480zx Professional Display
Technical Specifications - HP LCD Monitor Quick Release
DA - 13081 Worldwide — Version 10 — February 12, 2014 Page 10