HP ProLiant DL320e Gen8 v2 Installation instructions

EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Product End-of-Life Disassembly Instructions
Product Category: Servers
Marketing Name / Model
[List multiple models if applicable.]
HP ProLiant DL320e Gen8 V2
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
System board, PDB, FP board, dedicated Lan card,
SFF HDD board, LFF HHD board, x8 riser,x16 riser
8
Batteries
All types including standard alkaline and lithium coin
or button style batteries System Battery
1
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
In power supply(350W or 460W)
External electrical cables and cords
Power cord
1
Gas Discharge Lamps
No
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
No
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
No
0
Components, parts and materials containing
No
0

EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
No
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Torx screwdriver (included with the server)
T10/15
Philps screwdriver
#2
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. System Board Battery - Remove the top cover and locate the battery on the system board. With a medium flat head
screw driver remove the battery and dispose of properly.
2. Capacitors in 300W power supply=> 2.5 cm () - Remove the power supply from the system with a T-15 torx driver.
With a #2 Philips screw driver remove the screws securing the top cover then locate the capacitors and pry from the
PCB with a flat head screw driver or Long Nose Plier () and dispose of properly.
3. Capacitors in 750W power supply=> 2.5 cm () - Remove the power supply from the system with a T-15 torx driver.
With a #2 Philips screw driver remove the screws securing the top cover then locate the capacitors and pry from the
PCB with a flat head screw driver or Long Nose Plier and dispose of properly.
4.
5. .
6.
7.
8.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
1. Open the locking latch, slide the access panel to the rear of the chassis, and then remove the
access panel.

EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
RTC BATTERY
POWER SUPPLY –300W

EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
POWER SUPPLY –750W