
Table 1 10K RPM Fibre Channel drives (continued)
Supported controller
software version
Recommended
firmware version
Minimum supported
firmware version
HP model displayed in HP
P6000 Command View
Type
3.110,14.100,16.2x0HP05HP01BD0725822B
3.110,14.100,16.2x0HP0AHP092
BD14656ABC146 GB, 10K
RPM 3.110,14.100,16.2x0HP04HP01BD14658225
3.110,14.100,16.2x0HP07HP05BD14655B2A
3.110,14.100,16.2x0HP05HP01BD1465822C
3.110,14.100,16.2x0HP01HP01BD1465B778
3.110,14.100,16.2x0,
0953x000, 10000000
or later
HP01HP00BD300DAJZF300 GB, 10K
RPM
3.110,14.100,16.2x0HP04HP00BD30058226
3.110,14.100,16.2x0HP05HP00BD30058232
3.110,14.100,16.2x0HP01HP01BD3005B779
3.110,14.100,16.2x0HP03HP02BD300DADFP
0953x000, 10000000
or later
HP03HP01BD400DADFQ400 GB, 10K
RPM
6.2x0, 0953x000,
10000000 or later
HP01HP00BD450DAJZH450 GB, 10K
RPM
6.2x0, 0953x000,
10000000 or later
HP01HP00BD600DAJZK600 GB, 10K
RPM
1VCS 3.110 and 4.100 are inactive software versions but remain the latest and only recommended versions for use with
EVA3000/5000. HP Command View EVA 9.4 is the only active version that supports the EVA3000/5000 family.
2On VCS 3.110, the minimum supported version is HP0A.
Table 2 15K RPM Fibre Channel drives
Supported controller
software version
Recommended
firmware version
Minimum supported
firmware version
HP model displayed in HP
P6000 Command View
Type
3.110,14.100,16.2x0HP03HP01BF0365300536 GB, 15K RPM
3.110,14.100,16.2x03BE93BE9BF03654564
3.110,14.100,16.2x0HP07HP05BF03655B2B
3.110,14.100,16.2x0HP03HP002
BF03658242
3.110,14.100,16.2x0HP07HP04BF036D8617
3.110,14.100,16.2x0HP03HP02BF036DAJZL
3.110,14.100,16.2x0HP07HP05BF07255B2C72 GB, 15K RPM
3.110,14.100,16.2x0HP06HP05BF0725754B
3.110,14.100,16.2x0HP03HP00BF07258243
3.110,14.100,16.2x0HP06HP04BF07258222
3.110,14.100,16.2x0HP04HP01BF0725A692
3.110,14.100,16.2x0HP03HP00BF0725A476
3.110,14.100,16.2x0HP07HP04BF072D6186
4