
Page 4
perfCfgClear Clear the previously saved
performance monitoring
configuration settings from
non-volatile memory
perfCfgRestore Restore performance monitoring
configuration settings from
non-volatile memory
perfCfgSave Save performance monitoring
configuration settings to non-volatile
memory.
perfClrAlpaCrc Clear an AL_PA device’s CRC count
by the port and AL_PA.
perfDelEEMonitor Delete an end-to-end monitor on
port.
perfDelFilterMonitor Delete a filter-based monitor.
perfHelp Display performance monitoring help
information.
perfSetPortEEMask Set overall mask for end-to-end (EE)
monitors.
perfShowAlpaCrc Display the AL_PA CRC count by port
or by AL_PA.
perfShowEEMonitor Display end-to-end monitor
information and frame traffic on a
port.
perfShowFilterMonitor Display filter-based monitor
information and frame traffic for a
port.
perfShowPortEEMask Display the current end-to-end mask
of a port.
portCfgEport Enable or disable a port from
becoming an E_Port.
portCfgGport Designate a port as a locked G_Port.
portCfgLongDistance Configure a port to support long
distance links.
portCfgLport Lock a port as an L_PORT.
portCfgMcastLoopback Configure a port to receive multicast
frames.
portCfgShow Display port configuration settings.
portCfgSpeed Configure the port speed level.
portCfgTrunkport Configure a port to be enabled or
disabled for trunking.
portDisable Disable a switch port.
portEnable Enable a switch port.
portErrShow Display port error summary.
portLEDTest Exercise the user port LEDs.
portLogClear Clear the port log.
portLogDump Display the port log without page
breaks.
portLogDumpPort Display the port log of specified port,
without page breaks.
portLogShow Display the port log.
portLoopbackTest Functional test of port N->N path.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands
portPerfShow Display port throughput performance
in bytes, kilobytes, or megabytes.
portRegTest Bit write/read test of the ASIC SRAMs
and registers.
portRouteShow Display routing tables for a port.
portShow Display port status.
portStatsShow Display port hardware statistics.
powerOffListSet Sets slot power off list order.
powerOffListShow Displays slot power off list order.
psShow Display power supply status.
ptdatashow Display port data structure.
ptphantomshow Display port routing tables.
ptpropshow Display port properties.
ptregshow Display ASIC port registers.
ptrouteshow Display port routing properties.
ptstatsshow Display port statistics properties.
qlDisable Disable QuickLoop mode.
qlEnable Enable QuickLoop mode.
qloopAdd Add a member to a QuickLoop.
qloopCreate Create a QuickLoop.
qloopDelete Delete a QuickLoop.
qloopRemove Remove a member from a QuickLoop.
qloopShow Display QuickLoop information.
qlPartner Set a QuickLoop partner or display
information about a partner.
qlPortDisable Disable a QuickLoop port.
qlPortEnable Enable a QuickLoop port.
qlPortShowAll Display QuickLoop port information.
qlShow Display QuickLoop information.
qlStatsShow Display QuickLoop statistics.
quietMode Toggle the shell quiet mode on and
off.
ramTest Bit write and read test of SDRAMs in
the switch.
reboot Reboot the switch.
routeHelp Display routing help commands.
savecore Save or remove core files created by
daemons.
sensorShow Display sensor readings.
setesdmode Enable or disable ESD mode.
setgbicmode Enable or disable GBIC mode.
setmfgmode Enable or disable Mfg mode.
setsfpmode Enable or disable SFP mode.
setSlot Set the default slot number for
diagnostic commands.
setSplbMode Enable or disable two port loopback.
Legend: V3.0.x unique commands
V4.0.x unique commands
V3.0.x and V4.0.x commands