HPE FlexFabric 5930 Series Installation manual

HPE FlexFabric 5930 Switch Series
TRILL
Command Reference
Part number: 5998-7793R
Software version: Release 242x
Document version: 6W100-20151220

© Copyright 2015 Hewlett Packard Enterprise Development LP
The information contained herein is subject to change without notice. The only warranties for Hewlett Packard
Enterprise products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. Hewlett
Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or
copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software
Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor’s
standard commercial license.
Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard
Enterprise has no control over and is not responsible for information outside the Hewlett Packard Enterprise
website.
Acknowledgments
Intel®, Itanium®, Pentium®, Intel Inside®, and the Intel Inside logo are trademarks of Intel Corporation in the
United States and other countries.
Microsoft® and Windows® are trademarks of the Microsoft group of companies.
Adobe® andAcrobat® are trademarks ofAdobe Systems Incorporated.
Java and Oracle are registered trademarks of Oracle and/or its affiliates.
UNIX® is a registered trademark of The Open Group.

i
Contents
TRILL commands···························································································· 1
auto-cost enable·········································································································································1
display trill adjacent-table···························································································································1
display trill brief ··········································································································································2
display trill fib··············································································································································3
display trill graceful-restart status···············································································································4
display trill ingress-route ····························································································································6
display trill interface····································································································································6
display trill lsdb···········································································································································8
display trill mfib ingress ····························································································································11
display trill mfib transit······························································································································12
display trill multicast-route························································································································13
display trill neighbor-table ························································································································15
display trill peer ········································································································································16
display trill rpf-table ··································································································································17
display trill topology··································································································································18
display trill unicast-route···························································································································20
flash-flood·················································································································································21
flush-policy difference ······························································································································21
graceful-restart ·········································································································································22
graceful-restart interval ····························································································································23
graceful-restart suppress-sa ····················································································································23
ingress assign-delay ································································································································24
ingress assign-rule load-balancing···········································································································25
log-peer-change enable ···························································································································25
lsp-length originate···································································································································26
lsp-length receive ·····································································································································26
max-unicast-load-balancing ·····················································································································27
multicast multi-thread enable ···················································································································28
multicast-ecmp enable ·····························································································································28
nickname··················································································································································29
ping trill·····················································································································································30
reset trill····················································································································································31
set ingress-load-balancing ·······················································································································31
set overload··············································································································································32
snmp context-name··································································································································32
snmp-agent trap enable trill······················································································································33
system-id··················································································································································34
timer lsp-generation ·································································································································35
timer lsp-max-age ····································································································································36
timer lsp-refresh ·······································································································································36
timer spf ···················································································································································37
tracert trill ·················································································································································38
tree-root priority········································································································································41
trees calculate ··········································································································································42
trill·····························································································································································42
trill announcing-vlan ·································································································································43
trill bypass-pseudonode enable ···············································································································44
trill cost ·····················································································································································44
trill designated-vlan ··································································································································45
trill drb-priority ··········································································································································46
trill enable·················································································································································47
trill evb-support·········································································································································47
trill link-type ··············································································································································48
trill timer avf-inhibited ·······························································································································49
trill timer csnp ···········································································································································50
trill timer hello ···········································································································································50

ii
trill timer holding-multiplier ·······················································································································51
trill timer lsp ··············································································································································52
trill track····················································································································································53
Document conventions and icons ································································· 54
Conventions ·····················································································································································54
Network topology icons····································································································································55
Support and other resources ········································································ 56
Accessing Hewlett Packard Enterprise Support ······························································································56
Accessing updates···········································································································································56
Websites ··················································································································································57
Customer self repair·································································································································57
Remote support········································································································································57
Documentation feedback ·························································································································57
Index ············································································································· 58

1
TRILL commands
auto-cost enable
Use auto-cost enable to enable automatic link cost calculation for TRILL ports.
Use undo auto-cost enable to disable automatic link cost calculation for TRILL ports.
Syntax
auto-cost enable
undo auto-cost enable
Default
Automatic link cost calculation is enabled for TRILL ports.
Views
TRILL view
Predefined user roles
network-admin
Usage guidelines
The link cost of a TRILL port can be automatically calculated by the system or manually set.
•A manually set link cost takes precedence over a calculated link cost.
•If no link cost is set and automatic link cost calculation is enabled, the calculated link cost takes
effect.
•If no link cost is set and automatic link cost calculation is disabled, the default link cost of 2000
is used.
The system automatically calculates the link cost of a TRILL port by using the following formula: link
cost = 20000000000000/interface baud rate.
Examples
# Disable automatic link cost calculation for TRILL ports.
<Sysname> system-view
[Sysname] trill
[Sysname-trill] undo auto-cost enable
Related commands
trill cost
display trill adjacent-table
Use display trill adjacent-table to display the TRILL adjacency table.
Syntax
display trill adjacent-table [ count | nickname nickname interface interface-type
interface-number ]
Views
Any view

2
Predefined user roles
network-admin
network-operator
Parameters
count: Displays the number of entries.
nickname nickname interface interface-type interface-number: Specifies an RB on an interface.
The nickname argument represents the nickname of the RB, a hexadecimal number in the range of
0x1 to 0xFFFE. The interface-type interface-number argument represents the type and number of
the interface. If you do not specify this option, the command displays information about all RBs on
each interface.
Examples
# Display all entries in the TRILL adjacency table.
<Sysname> display trill adjacent-table
NextHop MAC address Interface
0x899b 00e0-fc58-123a FGE1/0/1
# Display the number of entries in the TRILL adjacency table.
<Sysname> display trill adjacent-table count
Total number of TRILL ADJ entries: 1
Table 1 Command output
Field Description
NextHop Nickname of the next-hop RB.
MAC address MAC address of the next-hop RB.
Interface Outgoing port of frames.
Total number of TRILL ADJ entries Number of entries in the TRILL adjacency table.
display trill brief
Use display trill brief to display brief TRILL information.
Syntax
display trill brief
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display brief TRILL information.
<Sysname> display trill brief
Network entity: 00.00a0.fc00.5806.00
Nickname: 0xfa1b
Nickname priority: 64
Tree-root priority: 32768

3
Cost style: Wide
Maximum allowed LSP received: 1492
Maximum allowed LSP originated: 1458
Maximum unicast load-balancing: 8
Overload status: None
Overload remaining time: N/A
Device role: Normal
Timers:
LSP-max-age: 1200s
LSP-refresh: 900s
Interval between SPFs: 10s 10ms 20ms
Table 2 Command output
Field Description
Network entity Name of the network entity.
Nickname Nickname of the RB.
Nickname priority Priority for the RB to hold the nickname.
Tree-root priority Priority to be a TRILL distribution tree root.
Cost style Cost type, which must be Wide.
Maximum allowed LSP received Maximum length of LSPs that can be received.
Maximum allowed LSP originated Maximum length of LSPs that can be originated.
Maximum unicast load-balancing Maximum number of TRILL unicast ECMP routes.
Overload status
Reason why the Overload bit is set:
•Config—The Overload bit is set through configuration.
•GR—The Overload bit is set during graceful restart.
•GR/Config—The Overload bit is set through configuration during
graceful restart of the Start type.
•None—The Overload bit has not been set through configuration.
Overload remaining time Lifetime of the set Overload bit. N/A indicates that the lifetime has not
been set or the lifetime has timed out.
Device role
Device role:
•Normal—Common RB.
•Access—Access layer device.
Timers TRILL timers.
LSP-max-age LSP maximum age (in seconds).
LSP-refresh LSP refresh interval (in seconds).
Interval between SPFs
Maximum SPF calculation interval (in seconds), minimum SPF
calculation interval (in milliseconds), and SPF calculation incremental
interval (in milliseconds).
display trill fib
Use display trill fib to display the TRILL FIB.
Syntax
display trill fib [ count | nickname nickname ]

4
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
count: Displays the number of entries.
nickname nickname: Specifies an RB by its nickname, a hexadecimal number in the range of 0x1 to
0xFFFE. If no RB is specified, the command displays information about all RBs.
Examples
# Display all entries in the TRILL FIB.
<Sysname> display trill fib
Flags: T-Transit, E-Egress
Destination HopCount NextHop Interface Flags
0xfa1b 63 N/A N/A E
0x899b 63 0x2a5c FGE1/0/1 T
# Display the number of entries in the TRILL FIB.
<Sysname> display trill fib count
Total number of TRILL FIB destinations: 1
Total number of TRILL FIB entries: 2
Table 3 Command output
Field Description
Destination Nickname of the destination RB.
HopCount Number of hops to the destination RB.
NextHop Nickname of the next-hop RB.
Interface Outgoing port of frames.
Total number of TRILL FIB destinations Number of destination RBs in the TRILL FIB.
Total number of TRILL FIB entries Number of entries in the TRILL FIB.
display trill graceful-restart status
Use display trill graceful-restart status to display GR status information for TRILL.
Syntax
display trill graceful-restart status
Views
Any view
Predefined user roles
network-admin
network-operator

5
Examples
# Display GR status information for TRILL.
<Sysname> display trill graceful-restart status
Restart status: RESTARTING
Restart phase: LSDB synchronization
Restart interval: 300s
T3 remaining time: 140s
Total number of interfaces: 1
Number of waiting LSPs: 3
T2 remaining time: 55s
Interface: FortyGigE1/0/1
T1 remaining time: 2s
RA received: Y
CSNP received: N
T1 expiration number: 1
Table 4 Command output
Field Description
Restart status
Restart status:
•COMPLETE—GR is complete.
•RESTARTING—GR of the Restart type is in process.
•STARTING—GR of the Start type is in process.
Restart phase
Restart phase:
•Finish—GR is complete.
•LSDB synchronization—T2 synchronization phase.
•LSDB generation—LSP generation phase.
•MCS synchronization—Layer 2 multicast data synchronization phase.
•SPF—Route calculation phase.
Restart interval Restart interval (in seconds).
T3 remaining time
Remaining time of the T3 timer (in seconds). The initial value is 65535
seconds. The value of this field is updated according to the remaining time in
the RA packet.
Total number of interfaces Total number of interfaces in the process.
T2 remaining time
Remaining time of the T2 timer (in seconds). For GR of the Restart type, the
initial value of the field is fixed at 60 seconds. For GR of the Start type, the
initial value is the value set by using the graceful-restart interval command
(by default, 300 seconds).
Interface Port name.
T1 remaining time Remaining time of the T1 timer (in seconds). The initial value of the field is 3
seconds.
RA received
RA received flag bit:
•Y—Set.
•N—Not set.
CSNP received
CSNP received flag bit:
•Y—Set.
•N—Not set.
T1 expiration number Number of T1 timer expiration times. The maximum value of the field is 10.

6
display trill ingress-route
Use display trill ingress-route to display TRILL ingress forwarding information.
Syntax
display trill ingress-route [ vlan vlan-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a VLAN
ID or a range of VLAN IDs in the form of vlan-id1 to vlan-id2. The value range for VLAN IDs is 1 to
4094. The value for vlan-id2 must be equal to or greater than the value for vlan-id1. If you do not
specify a VLAN, this command displays the TRILL ingress forwarding information for all VLANs.
Examples
# Display TRILL ingress forwarding information for all VLANs.
<Sysname> display trill ingress-route
Total number of VLANs: 1
-------------------------------------
VLAN ID:
1
List of local ports(in total: 1):
FGE1/0/2
-------------------------------------
VLAN ID:
1
Root nickname:
0x5801
List of remote ports(in total: 2):
BAGG3
BAGG4
Table 5 Command output
Field Description
List of local ports(in total: 1) Local ingress port list and total port number.
Root nickname Nickname of root bridge in the VLAN's distribution tree.
List of remote ports(in total: 2) Egress port list and total port number.
display trill interface
Use display trill interface to display TRILL interface information.

7
Syntax
display trill interface [ interface-type interface-number | verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is
specified, the command displays information about all TRILL interfaces.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
brief TRILL interface information.
Examples
# Display brief information about all TRILL interfaces.
<Sysname> display trill interface
Interface Protocol state DRB Cost Link type
----------------------------------------------------------------------
FortyGigE1/0/1 UP Yes 2000 Access
# Display detailed information about all TRILL interfaces.
<Sysname> display trill interface verbose
Interface: FortyGigE1/0/1
Circuit ID: 0x01
Protocol state: UP
Nickname: 0x9c2c
MTU: 9982
DRB: Yes
Designated VLAN: 1
Link type: Access
CSNP timer: 10s
Hello timer: 3s
Hello multiplier: 3
LSP timer: 10ms
LSP transmit-throttle count: 5
Cost: 2000
AVF inhibited timer: 30s
Priority: 64
Track index: None
Track state: NotReady
Active AVF:
1-30
Inhibited AVF: None
Table 6 Command output
Field Description
Circuit ID Circuit ID of a physical port.

8
Field Description
Protocol state
State of TRILL:
•UP.
•DOWN.
Nickname Nickname of the RB.
MTU MTU (in bytes) of the link.
DRB
Whether the RB is elected as a DRB:
•Yes—The RB is elected as a DRB.
•No—The RB is not elected as a DRB.
•Down—The port is down and does not participate in DRB
election.
•Suspended—The port is suspended.
Designated VLAN Effective designated VLAN. If the port is down or no VLAN is allowed
on the port, this field displays 65535.
Link type
TRILL port type:
•Access.
•Hybrid.
•Trunk.
CSNP timer CSNP interval, in seconds.
Hello timer Hello interval, in seconds.
Hello multiplier Hello multiplier.
LSP timer Minimum LSP interval, in milliseconds.
LSP transmit-throttle count Maximum number of LSPs transmitted per interval.
Cost Link cost of the port.
AVF inhibited time AVF inhibition time, in seconds.
Priority DRB priority.
Track index Track entries associated with the TRILL port. If the TRILL port is not
associated with any track entries, this field displays None.
Track state
Track entry state:
•NotReady—The interface is not associated with any track
entries, or the Track module is not connected.
•Positive—The tracked interface operates correctly.
•Negative—The tracked interface is abnormal.
Active AVF
VLANs for which the RB is specified as the AVF by the DRB on the
port. None indicates that the RB is not specified as the AVF for any
VLAN.
Inhibited AVF VLANs whose AVFs are inhibited on the port. None indicates that no
such VLAN exists on the port.
display trill lsdb
Use display trill lsdb to display TRILL LSDB information.
Syntax
display trill lsdb [ local | lsp-id lsp-id | verbose ] *

9
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
local: Specifies locally originated LSPs.
lsp-id lsp-id: Specifies an LSP by its ID. The lsp-id argument is in the format of SYSID.Pseudonode
ID-fragment num. SYSID is the system ID of the originating node or pseudo-node, and fragment
num is the fragment number of the LSP. If no LSP is specified, the command displays information
about all LSPs.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
brief LSDB information.
Examples
# Display brief information about the TRILL LSDB.
<Sysname> display trill lsdb
Flags: * - Self LSP
LSP ID Seq num Checksum Holdtime Length Overload
---------------------------------------------------------------------------
00a0.fc00.5806.00-00* 0x00000005 0xd315 361 78 0
# Display detailed information about the TRILL LSDB.
<Sysname> display trill lsdb verbose
LSP ID: 00a0.fc00.5806.00-00*
Sequence number: 0x00000005
Checksum: 0xd315
Holdtime: 1145s
Length: 78
Overload: 0
Source: 00a0.fc00.5806.00
TRILL version: 0x00
Nickname:
Nickname: 0xfa1b
Priority: 64
Tree-root priority: 32768
Trees:
Compute trees number: 1
Max compute trees number: 15
Used trees number: 1
Tree identifiers:
0x899b
Trees used identifiers:
0x899b
Interested VLANs:
Start: 4, End: 4, M4: 0, M6: 0
Start: 5, End: 6, M4: 1, M6: 0
Neighbor:

10
ID: 00e0.fc58.123a.01, Cost: 2000
Group address:
VLAN ID: 2
Group MAC address: 0100-5e01-0101
Gateway information:
MAC address: 0100-5e01-0001
VR type: IPv4, VR ID: 2, VR priority: 64
Gateway router capability:
VR type: IPv4, VR ID: 2
VLAN ID: 2
Virtual address:
192.168.1.1
192.168.1.2
Table 7 Command output
Field Description
LSP ID LSP ID. An asterisk (*) after an ID indicates that the LSP is locally originated.
Seq num/Sequence
number Sequence number of the LSP.
Checksum Checksum of the LSP.
Holdtime Remaining lifetime of the LSP (in seconds).
Length LSP length.
Overload
Whether the Overload bit is set in the LSP:
•0—Not set.
•1—Set.
Source Number of the originating RB.
TRILL version Highest TRILL version supported by the originating RB.
Nickname
Nickname information for the originating RB:
•Nickname—Nickname of the RB.
•Priority—Priority to hold the nickname.
•Tree-root priority—Priority to be a TRILL distribution tree root.
Trees
TRILL distribution tree computation information for the originating RB:
•Compute trees number—Number of TRILL distribution trees that the RB
wants all RBs to compute.
•Max compute trees number—Maximum number of TRILL distribution
trees that the RB can compute.
•Used trees number—Number of TRILL distribution trees to use when the
RB is an ingress RB.
Tree identifiers TRILL distribution trees that the originating RB requires other RBs to compute
when the originating RB has the highest priority to be the distribution tree root.
Trees used identifiers TRILL distribution trees used by the originating RB when the RB is an ingress
RB.
Interested VLANs
Information about the VLANs that use the originating RB as the AVF:
•Start—Start VLAN ID.
•End—End VLAN ID.
•M4—Whether an IPv4 multicast router exists in the VLAN range:
{0—Exists.

11
Field Description
{1—Does not exist.
•M6—Whether an IPv6 multicast router exists in the VLAN range:
{0—Exists.
{1—Does not exist.
Neighbor
Nickname information for the originating RB:
•ID—ID of the neighbor.
•Cost—Cost of the link to the neighbor.
Group address
Multicast MAC address information for the originating RB:
•VLAN ID—ID of the VLAN to which the multicast MAC addresses belong.
•Group MAC address—Multicast group listeners.
Gateway information
Gateway information for the originating RB. This field is reserved for future use.
•MAC address—Real MAC address.
•VR type—VR type, IPv4 or IPv6.
•VR ID—VR ID.
•VR priority—Priority for master RB election.
Gateway router
capability
Gateway capability of the originating RB. This field is reserved for future use.
•VR type—VR type, IPv4 or IPv6.
•VR ID—VR ID.
•VLAN ID—VLAN ID for the VR's virtual IP addresses.
•Virtual address—Virtual IP addresses.
display trill mfib ingress
Use display trill mfib ingress to display ingress entries in the TRILL MFIB.
Syntax
display trill mfib ingress [ vlan vlan-id [ local-entry | remote-entry ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If no VLAN is specified, the
command displays information about all VLANs.
local-entry: Specifies local ingress entries. The frames sent by the ports in the local ingress entries
do not need TRILL encapsulation.
remote-entry: Specifies remote ingress entries. The frames sent by the ports in the remote ingress
entries need TRILL encapsulation.
Usage guidelines
If neither local-entry or remote-entry is specified, this command displays information about local
and remote ingress entries.
Examples
# Display all ingress entries in the TRILL MFIB.

12
<Sysname> display trill mfib ingress
----------------------------------------------------------------------
Ingress type: Local entry
VLAN ID: 1
Ports:
FGE1/0/1
----------------------------------------------------------------------
Ingress type: Remote entry
VLAN ID: 1
RootNickName: 0x5092
Ports:
FGE1/0/2
Table 8 Command output
Field Description
Ingress type
Type of ingress entries:
•Local entry.
•Remote entry.
VLAN ID VLAN ID of the entry.
RootNickName Nickname of the root bridge.
Ports Ports of the entry.
display trill mfib transit
Use display trill mfib transit to display egress entries in the TRILL MFIB.
Syntax
display trill mfib transit [ nickname nickname [ prune-entry | rpf-entry | vlan vlan-id [ mac
mac-address ] ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
nickname nickname: Specifies an RB by its nickname, a hexadecimal number in the range of 0x1 to
0xFFFE. If no RB is specified, the command displays information about all RBs.
prune-entry: Specifies pruned entries. If you do not specify this keyword, the command displays
information about all entries.
rpf-entry: Specifies RPF entries. If you do not specify this keyword, the command displays
information about all entries.
vlan vlan-id: Specifies a VLAN by its ID in the range of 1 to 4094. If no VLAN is specified, the
command displays information about all VLANs.
mac mac-address: Specifies a MAC address. If no MAC address is specified, the command displays
information about all MAC addresses.

13
Examples
# Display all egress entries in the TRILL MFIB.
<Sysname> display trill mfib transit
----------------------------------------------------------------------
Transit type: RPF entry
RootNickName: 0x5092
InNickName: 0x5092
Port: FGE1/0/1
----------------------------------------------------------------------
Transit type: RB entry
RootNickName: 0x5092
Flag: Egress/Transit
Ports:
FGE1/0/1
----------------------------------------------------------------------
Transit type: VLAN RB entry
RootNickName: 0x5092
VLAN ID: 1
Flag: Egress/Transit
Ports:
FGE1/0/1
Table 9 Command output
Field Description
Transit type
Type of egress entries:
•RB entry.
•RPF entry.
•VLAN RB entry—RB entries of the specified VLAN.
•MAC VLAN RB entry—RB entries of the specified VLAN and MAC address.
RootNickName Nickname of the root bridge.
InNickName Nickname of the ingress RB.
VLAN ID VLAN ID of the entry.
MAC address MAC address of the entry.
Flag
Entry type:
•Egress—Egress entries.
•Transit—Transit entries.
•Egress/Transit—Both transit and egress entries.
Port/Ports Ports of the entry.
display trill multicast-route
Use display trill multicast-route to display the TRILL multicast routing table information, which
includes the next-hop outgoing port list for multidestination frames based on multicast distribution
trees.
Syntax
display trill multicast-route [ tree-root nickname [ vlan vlan-list [ mac-address mac-address ] ] ]

14
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
tree-root nickname: Specifies a TRILL distribution tree by its root RB's nickname, a hexadecimal
number in the range of 0x0 to 0xFFFF. If you do not specify this option, the command displays
information about the TRILL multicast routing table.
vlan vlan-list: Specifies a space-separated list of up to 10 VLAN items. Each VLAN item specifies a
VLAN ID or a range of VLAN IDs in the form of start-vlan-id to end-vlan-id, where the end VLAN ID
must be greater than the start VLAN ID. Valid VLAN IDs are from 1 to 4094. If no VLAN is specified,
the command displays information about all VLANs.
mac-address mac-address: Specifies a MAC address. If no MAC address is specified, the
command displays information about all MAC addresses.
Examples
# Display all information about the TRILL multicast routing table.
<Sysname> display trill multicast-route
Root Flag
-------------------------------------
0x899b Valid
# Display multicast routing information for the TRILL distribution tree that is rooted at the RB 0x899B.
<Sysname> display trill multicast-route tree-root 899b
Root: 0x899b
LocalRcvFlag: True
List of VLANs:
1 to 10, 13, 40, 60 to 85, 200, 1001
List of outgoing ports (4 in total):
FGE1/0/1
FGE1/0/2
FGE1/0/3
FGE1/0/4
# Display multicast routing information for VLAN 1's distribution tree that is rooted at the RB 0x899B.
<Sysname> display trill multicast-route tree-root 899b vlan 1
Root: 0x899b
VLAN: 1
LocalRcvFlag: False
List of outgoing ports (3 in total):
FGE1/0/1
FGE1/0/2
FGE1/0/3
List of IPv4 multicast-router ports (2 in total):
FGE1/0/1
FGE1/0/2
List of IPv6 multicast-router ports (2 in total):
FGE1/0/2

15
FGE1/0/3
List of MAC addresses (4 in total):
0000-1111-00ee
00ff-1111-00ff
00ef-1111-00ef
0000-111f-00ff
# Display multicast routing information for VLAN 1's distribution tree that is rooted at the RB 0x899B
and the MAC address 0011-11FF-0022.
<Sysname> display trill multicast-route tree-root 899b vlan 1 mac-address 0011-11ff-0022
Root: 0x899b
VLAN: 1
MAC address: 0011-11ff-0022
LocalRcvFlag: True
List of outgoing ports (2 in total):
FGE1/0/3
FGE1/0/4
Table 10 Command output
Field Description
Root Nickname of the TRILL distribution tree's root RB.
VLAN ID of the VLAN.
Flag
Whether the root bridge is valid:
•Invalid.
•Valid.
LocalRcvFlag
Local receiving flag:
•False—The local end does not de-encapsulate the TRILL frame.
•True—The local end de-encapsulates the TRILL frame and
forwards the frame.
List of outgoing ports Outgoing port list. None indicates that no outgoing port exists.
List of VLANs VLAN list. None indicates that no VLAN exists.
List of IPv4 multicast-router ports Port list of the IPv4 multicast router.
List of IPv6 multicast-router ports Port list of the IPv6 multicast router.
List of MAC addresses MAC address list.
display trill neighbor-table
Use display trill neighbor-table to display the TRILL neighbor table.
Syntax
display trill neighbor-table
Views
Any view
Predefined user roles
network-admin
network-operator

16
Examples
# Display the TRILL neighbor table.
<Sysname> display trill neighbor-table
Total number of nexthops: 1
NextHop MAC address Interface
--------------------------------------------------------------------------
0x899b 00e0-fc58-123a FGE1/0/1
Table 11 Command output
Field Description
NextHop Nickname of the next-hop RB.
MAC address MAC address of the next-hop RB.
Interface Outgoing port.
display trill peer
Use display trill peer to display TRILL neighbor statistics.
Syntax
display trill peer [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If no
interface is specified, the command displays information about all interfaces.
Examples
# Display TRILL neighbor statistics for interface FortyGigE 1/0/1.
<Sysname> display trill peer interface fortygige 1/0/1
System ID: 00e0.fc58.123a
Interface: FortyGigE1/0/1
Circuit ID: 00e0.fc58.123a.01
State: Up
Holdtime: 8s
DRB priority: 64
Nickname: 0x899b
Uptime: 00:38:15
Table 12 Command output
Field Description
System ID System ID of the neighbor.
Interface Local TRILL port directly connected to the neighbor.