HQ RC UNIVERS34 User manual

RC UNIVERS34
8in 1 LCD remote control
MANUAL
all languages

2
www.hqproducts.com

3
The RC UNIVERS34 universal remote controlsalmost all brands of Televisions (TV), DVD-
players and DVR-players (DVD), DVB receivers and (digital) Satellite receivers and Cable
box (DVB), Video Recorders (VCR), Tuner receivers (TUNER), Tape receivers (TAPE),
CD-players (CD), Audio amplifiers and LD-players and other Audio (AUX).The RC
UNIVERS34 universal remote control operates all main functions of your selection of
devices. It features the largest infrared code library for European market.
This RC provides Auto Search-, Learn-, Show View-, Macro-, Volume lock-, Device
lock-function and Low battery indication, permanent back up memory, real time
clock as well.
Please read this user manual carefully before using yournew LCD remote control.
For very special functions which are not described in your language please use the
English manual.
Device Code Assignment
Bank for Device Initial code Total of codes
TV TV 048 488
VCR VCR 075 182
DVB Satellite,Cable,DVB 075 403
DVD DVD,DVR 026 190
CD CD 035 124
TUNER TUNER 039 114

4
Realize the Key
SET For you start to set up the remote control or show the
status in LCD screen.
LEARN Enter to learning mode.
TV VCR DVB CD DVD TUNER TAPE AUX Let you select the
device you want to control.
POWER Turns the device on and off.
0-9 The number keys operate the same as on your original
remote control, and maybe also used for entering device codes
when set up.
Works like the enter on your original remote.
AV Works like the TV/Video key on your original TV remote,
and TV/SAT key on your original satellite remote A.B in cable
and CD modes.
MENU Works like the Menu or OSD (on-screen display) or
Memory key on your original remote control.
CH±Works like the Channel Up and Down keys on your
original remote control.
VOL±Control the volume like the Volume Up and Down on
your original remote control.
Key to mute the sound
REW（fast reverse）
PLAY (operate your DVD, CD etc)
FFWD (fast forward)
REC (record)
STOP (terminate your operation)
PAUSE
OK EXIT Works like the UP，DOWN，
LEFT ，RIGHT ，OK ，EXIT Keys on your original remote
control for menu function. But during set up mode they are used
for cursor, confirm and exit to program your remote control only.
RED YELLOW BLUE GREEN for TV Fast Text.
SHOW VIEW Scans all channels for your program quick view.
ALL OFF Switches off all your devicesonly with one button.
MACRO Let you make sequent operation for you home theater.
Television video
TV and text mixed
Teletext mode
Page hold
Displays info on the selected channel
Direct Set Up (by Brand and Code)
1. Turn on the device (e.g. TV) you would like to operate. If it is a VCR, please insert a tape.
2. Press and hold the SET key on your remote control. Then press (simultaneously) one of

5
the device keys (e.g. TV)
3. Then release them, the brand will be displayed on the screen.
4. You can press the or key to select the brand of your device (e.g. your TV
brand: Life)
5. Check the function of the keys. If none of the keys of your new remote control can work,
or most of the keys work improperly, please try another code by the or key, until all
basic functions operate properly.
6. If you are satisfied with the code, just press the OK key to save it. LCD shows
SUCCESS and then finishes the set up.
Set-up by Auto Search
1. Turn on the device (e.g. television) you would like to operate. If it is a VCR, please insert
a tape.
2. Press the SET key on your new remote control for more than 3 seconds, then release it.
3. Press the or keys to select to CODE SETUP in the LCD menu, and press
the OK key.
4. The screen shows the DEV SEARCH in the LCD menu, and press the OK key, then
you press device key to select your desired operation device(e.g. DVD) and then press the
OK key to start the Auto Search.(you must point your remote control to your device at the
moment)
5. See if the device reacts or not, once the device reacts, press any key to stop the search.
6. Test if most of keys work good or not. If most keys work not good enough, please step
4~5.
7. If you find one satisfied code please press the OK key to save it and LCD shows
SUCCESS then show DEV SEARCH. You can press device key (e.g. DVD) again to finish
SET UP or use or to select other set up.

6
Set-up by Enter Code
1. Switch on the device, which you would like to control (e.g. TV set).
2. In the back section of this manual, find the brand name and code number of your device
brand (e.g. Lifetec 003,010,062,).
3. Press the SET key on your new remote control for more than 3 seconds, then release it.
4. Press the or keys to select to CODE SETUP in the LCD menu, and press
the OK key.
5. The screen shows the DEV SEARCH in the LCD menu, press the or keys
to select to CODE SETUP in the LCD menu, and press the OK key.
6. Then you press device key to select your desired operation device(e.g. TV) and then
press the OK key, you must now enter the 3-digit device code (e.g. 003 for Lifetec TV)
7. Press the OK key to save it and LCD shows SUCCESS, and press EXIT key two times
to exit the SETUP mode.
8. You check the function of the keys on the remote control. If most keys on your new
remote control do not function correctly, try another 3-digit device code (e.g. 010…) from
the list under the same brand. Repeat steps 3 to 7 until all the basic functions operate
correctly.

7
Learning
Learn a Command
1. Press a device key (e.g. TV) where you want to learn to.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll key to LEARNING in the LCD menu, then press the OK key.
4. Scroll key to LEARN KEY in the LCD menu and then press the OK key.
5. Select the (target) key you want to learn (e.g. Power). The LCD display SELECT KEY.
6. Point the transmitter of the original remote control remotes face to the receiver window of
RC UNIVERS34 by approximately 30mm apart.
7. Press and hold the original remote key (e.g. Power) until the LCD display shows
SUCCESS for 1 second. If LCD display shows FAILED, please repeat steps 4-6.
8. Repeat steps 4-6 to learn more keys.

8
Delete the Learnt Key
If you like to delete a learned command, you can follow the steps as below:
1. Press the device key (e.g. TV) where the command you like to delete from.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll key to LEARNING in the LCD menu, then press the OK key and the
LCD display shows LEARN KEY.
4. Scroll key to DELETE KEY in the LCD menu and then press the OK key.
5. Press the key on RC UNIVERS34 that you want to delete, the LCD shows SURE DELET
and then press the OK key to confirm, the LCD will show SUCCESS .
6. Repeat Step 4 to delete next key you w
7. Press a device key (e.g. TV) to quit the delete operation when all desired remote
commands are deleted.

9
Delete All Learnt Command For a Device
1. Press a device key (e.g. TV) where you want to delete commands from.
2. Press and hold the SET key for more than 3 seconds, then release it.
3. Scroll key to LEARNING in the LCD menu, and then press the OK key and the
LCD display LEARN KEY.
4. Scroll key to DELETE DEV in the LCD menu and then press the OK key.
5. You select the device want to delete, then press the OK key.
6. The LCD shows SURE DELET and then press the OK key, the LCD shows SUCCESS.
7. Repeat step 5 to delete commands in other device key.
8. Press EXIT key (e.g. TV) to quit deletes operation.

10
Remark: sometimes it can take about 3 minutes to delete all commands in one device. If
there aren’t many commands, delete commands one by one.
Other Set Up
A. Set up Clock
1. Press and hold the SET key for more than 3 seconds, then release it.
2. Press the or key to select the CONFIGURE in the LCD menu, and then
press the OK key.
3. Press the or key to select the TIME SETUP in the LCD menu, and then
press the OK key.
4. Press the or key to move the cursor to select hour or minute or AM/PM, then
press the number key to set hour and minute, and press the or key to select AM
or PM.
5. Press the OK key to save the setting and LCD display SUCCESS for 1 second then exit
to current setup state, if you enter errors the LCD screen shows ERROR for 1 second. You
can press any device key to finish the set up or press EXIT key return to the last state.