HTI HT-105 User manual

SMART MOBILE PHONE THERMAL IMAGER
OPERATION MANUAL
HT-105 HT-203U

1. Precautions
2. Product Overview
2.1 Application Scenario
2.2 Main Functions
3. Product Use
3.1 Equipment Connection
3.2 Software Operation
3.2.1 Gallery, Photo and Video
3.2.2 Shutter Refresh
3.2.3 Temperature Measurement Analysis
3.2.4 Color Palette
3.2.5 Temperature Measurement Setting
3.2.6 Settings
4. Technical Parameters
Content
1
2
2
2
3
3
4
4
5
5
8
10
11
12

1
1. Precautions
Please read all the following information before using your
device to protect you and others from injury or damage to your
device.
(1) Do not expose the product in the sun and other high-inten-
sity radiation sources
(2) Do not touch or collide the detector window and lens with
hands or other objects;
(3) Do not touch the device and USB interface with wet hands;
(4) Do not scrub your equipment with thinner;
(5) Please pay attention to preventing static electricity;
(6) Do not disassemble the equipment. If there is any fault,
please contact our company for repair by professional
personnel.

2
2. Product Overview
2.1 Application Scenario
Using this smartphone thermal imager, you need to download
and install the smartphone thermal image "HTI-105/203U" APP
to achieve infrared observation and infrared temperature
measurement function through this APP.
Scan QR code to download the App
2.2 Main Functions
The main functions are as follows:
(1) Open the application software of the infrared thermal imager
to perform infrared observation;

3
(2) Carry out infrared temperature measurement and tempera-
ture analysis;
(3) Take photos and videos;
(4) Action control and parameter setting of the mobile phone
thermal imager.
3. Product Use
3.1 Equipment Connection
Insert the infrared thermal imager into the USB interface of the
mobile phone. The mobile phone will automatically recognize
the USB device and pop up a prompt. Check the box and click
"OK". The software will start the infrared thermal imager of the
mobile phone, and the mobile phone screen will enter the
infrared observation screen.

(1) “ ”Gallery: Click to view the image and video.
When entering the picture list/video list, check the
picture/video and click “ ” at the top right to delete
or share the picture/video.
Choosing to share can be used to read images or
videos.
(2) “ ”Photo: Save the current picture;
Photo preservation location: Open the required image in the
gallery to view the image location.
4
3.2 Software Operation
Temperature measurement analysis
3.2.1 Gallery, Photo and Video

Click “ ” to pop out option of temperature measurement.
5
3.2.2 Shutter Refresh
“ ”Shutter refresh: Click to refresh the shield.
(3) “ ”Video: click to start video recording, and click again
to end video recording.
The save location of video is the same as the image.
3.2.3 Temperature Measurement Analysis
Point temperature measurement
Line temperature measurement analysis
Regional temperature measurement analysis
(1) Point temperature measurement: click the point temperature
measurement button, and the screen will display the tempera-
ture information of three points, namely the central temperature
point, the highest temperature point and the lowest temperature

6
point. Click the screen at this time, and the temperature
information of the user-defined point will be added.
(2) Line temperature measurement analysis: drag with your
fingers and draw a horizontal line on the screen. It will
automatically analyze the maximum temperature and minimum
temperature of the horizontal line, and identify relevant
information.
Line temperature measurement analysis
(3) Regional temperature measurement analysis: drag with your
fingers and draw a rectangle on the screen. it will automatically
analyze the maximum temperature and minimum temperature
in the rectangular area, and identify relevant information, as
shown in the following figure:

Click the “ ” to pop up the color palette interface, and you
can switch between 8 types of color palettes including the white
hot, black hot, blend, iron, dark brown, red hot, green hot,
rainbow,as shown in the following figure.
7
Regional temperature measurement analysis
3.2.4 Color Palette

8
White Hot Black Hot Blend
The display effects of the 8 types of color palettes are as
follows: